[Fri May 24 11:39:51 2013] Detection parameters: Position = (651.6, 753.9) = 10 43 59.51 11 43 16.0 Extent = 0.5" x 0.5", rotation angle = 64 degrees Source counts = 10.7 +/- 3.3 Background counts = 0.3 Rate = 0.001 +/- 0.0003 [Fri May 24 11:39:51 2013] Off-axis axis estimate = 3.38' [Fri May 24 11:55:42 2013] Using EEF radius (= 0.66 ")to estimate initial spatial extent for simple fitting [Fri May 24 11:55:42 2013] Initial guess for spatial extent in simple fitting = 0.66" [Fri May 24 11:55:42 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.878 [Fri May 24 11:55:42 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.66" [Fri May 24 12:04:04 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src8.ximg exists [Fri May 24 12:04:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src8.csv [Fri May 24 12:04:04 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src8_1.ximg exists [Fri May 24 12:04:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src8.csv [Fri May 24 12:04:04 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf13765_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 12:04:04 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src8.ximg exists [Fri May 24 12:04:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src8.csv [Fri May 24 12:04:04 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists [Fri May 24 12:04:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src8.csv [Fri May 24 12:04:04 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf13765_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 12:04:07 2013] Spatial fit model total counts = 11.425400, observed total counts = 13.000000 [Fri May 24 12:04:07 2013] Offset between fit and detection position for source 11 = 0.735148 pixels Spatial fit parameters: Offset between fit and detection position for source 11 = 0.735148 pixels Position = (652.1, 754.4) = 10 43 59.51 11 43 16.1 Extent = 0.7 (0.5-1.1)" x 0.3 (0.2-0.5)", rotation angle = 116 (93-139) degrees Source counts = 11.0 +/- 3.3 Background counts = 0.0 Rate = 0.001 +/- 0.0003 [Fri May 24 12:04:07 2013] Vigneting correction estimate = 1.000000 [Fri May 24 12:04:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 24 12:04:07 2013] Assessing source extent using major axis lower bound [Fri May 24 12:04:07 2013] Source does appear to be extended [Fri May 24 12:04:07 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02 [Fri May 24 12:19:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 24 12:19:50 2013] Initial guess for spatial extent in simple fitting = 0.54" [Fri May 24 12:19:50 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.883 [Fri May 24 12:19:50 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.54" [Fri May 24 12:28:41 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src8.ximg exists [Fri May 24 12:28:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src8.csv [Fri May 24 12:28:41 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src8_1.ximg exists [Fri May 24 12:28:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src8.csv [Fri May 24 12:28:41 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf13765_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 24 12:28:42 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src8.ximg exists [Fri May 24 12:28:42 2013] fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists [Fri May 24 12:28:42 2013] Fit fullrun_ccd7_acisf13765_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly [Fri May 24 12:28:45 2013] Spatial fit model total counts = 11.437400, observed total counts = 13.000000 [Fri May 24 12:28:45 2013] Offset between fit and detection position for source 11 = 0.053044 pixels Spatial fit parameters: Offset between fit and detection position for source 11 = 0.053044 pixels Position = (652.1, 754.3) = 10 43 59.51 11 43 16.0 Extent = 0.7 (0.5-1.1)" x 0.3 (0.2-0.5)", rotation angle = 117 (95-139) degrees Source counts = 11.0 +/- 3.3 Background counts = 0.0 Rate = 0.001 +/- 0.0003 [Fri May 24 12:28:45 2013] Vigneting correction estimate = 1.000000 [Fri May 24 12:28:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 24 12:28:45 2013] Assessing source extent using major axis lower bound [Fri May 24 12:28:45 2013] Source does appear to be extended [Fri May 24 12:28:45 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99 [Fri May 24 12:35:19 2013] Writing source region out to fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11_src.reg [Fri May 24 12:35:19 2013] Extracting stamp from image fullrun_ccd7_acisf13765_pi14-548_cl_sm2.00.img.gz, (619, 721) - (685, 787) [Fri May 24 12:35:19 2013] Writing fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11.gif [Fri May 24 12:37:17 2013] Size of ../../acisf13765/products/events/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11_src.evt.gz[events] = 11 counts [Fri May 24 12:37:17 2013] Mean chipx,y = (601.64, 518.00) [Fri May 24 12:37:17 2013] Mean tdetx,y = (4518.64, 2220.00) [Fri May 24 12:37:17 2013] chipx,y range = (584.00-617.00, 504.00-533.00) [Fri May 24 12:37:17 2013] Size of ../../acisf13765/products/events/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 10 counts [Fri May 24 12:37:18 2013] Not generating rmf since there are only 11 counts [Fri May 24 12:37:18 2013] arf not found, will run specextract [Fri May 24 12:37:25 2013] ../../acisf13765/products/spectra/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11.warf not found [Fri May 24 12:37:25 2013] ../../acisf13765/products/spectra/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11.wrmf not found [Fri May 24 12:37:25 2013] Removal of ../../acisf13765/products/spectra/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11.soff failed [Fri May 24 12:39:04 2013] Spectrum 11 has only 11 counts, deleting rmf [Fri May 24 12:39:04 2013] 225.09 [Fri May 24 12:39:08 2013] Updating aperture counts using extracted products [Fri May 24 12:39:08 2013] Total counts from fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11_src.pi.gz = 11.00 [Fri May 24 12:39:08 2013] Total counts from fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11_bgd.pi.gz = 10.00 [Fri May 24 12:39:08 2013] Got source and background scale factors 0.000001, 0.000019 [Fri May 24 12:39:08 2013] User source parameters: Position = (652.1, 754.3) = 10 43 59.51 11 43 16.0 Extent = 0.7 (0.5-1.1)" x 0.3 (0.2-0.5)", rotation angle = 117 (95-139) degrees Source aperture counts = 10.6 +/- 4.4 Background aperture counts = 0.4 Rate = 0.001 +/- 0.0005 [Fri May 24 12:39:08 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 24 12:39:08 2013] Using photon index=1.80, rate=0.00112, arf fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11.arf [Fri May 24 12:39:08 2013] Assuming count rate is from the 0.20-8.00 bandpass [Fri May 24 12:39:08 2013] Updating source flux to 8.6e-15 [Fri May 24 12:39:14 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting [Fri May 24 12:39:15 2013] acisf13765/analysis//spectral/fullrun_ccd7_acisf13765_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete