[Sat Aug 4 17:57:00 2012] Detection parameters: Position = (232.0, 644.8) = 15 3 8.73 -41 40 59.7 Extent = 1.0" x 0.7", rotation angle = 45 degrees Source counts = 37.0 +/- 7.8 Background counts = 24.0 Rate = 0.0004 +/- 8e-05 [Sat Aug 4 17:57:00 2012] Off-axis axis estimate = 2.42' [Sun Aug 5 00:08:46 2012] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting [Sun Aug 5 00:08:46 2012] Initial guess for spatial extent in simple fitting = 0.48" [Sun Aug 5 00:08:46 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.031 [Sun Aug 5 00:08:46 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.48" [Sun Aug 5 00:51:22 2012] fullrun_ccd3_acisf13743_pi14-548_cl_pass0_src13.ximg exists [Sun Aug 5 00:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13743_pi14-548_cl_pass0_src13.csv [Sun Aug 5 00:51:22 2012] fullrun_ccd3_acisf13743_pi14-548_cl_pass0_src13_1.ximg exists [Sun Aug 5 00:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13743_pi14-548_cl_pass0_src13.csv [Sun Aug 5 00:51:22 2012] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf13743_pi14-548_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf13743_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 5 00:51:22 2012] fullrun_ccd3_acisf13743_pi14-548_cl_pass0_tfrozen_src13.ximg exists [Sun Aug 5 00:51:22 2012] fullrun_ccd3_acisf13743_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists [Sun Aug 5 00:51:22 2012] Fit fullrun_ccd3_acisf13743_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly [Sun Aug 5 00:51:53 2012] Spatial fit model total counts = 172.560000, observed total counts = 173.000000 [Sun Aug 5 00:51:53 2012] Offset between fit and detection position for source 37 = 0.381611 pixels [Sun Aug 5 00:51:53 2012] 175.392700 total counts/ 159.568000 bgd. counts: snr = 1.252745 Spatial fit parameters: Offset between fit and detection position for source 37 = 0.381611 pixels Position = (232.2, 645.1) = 15 3 8.74 -41 40 59.8 Extent = 0.8 (0.3-1.5)", rotation angle = 0 Source counts = 15.8 +/- 13.2 Background counts = 159.6 Rate = 0.0002 +/- 0.0001 Deleting source due to low Poisson probability