[Sat Aug  4 17:56:28 2012] Detection parameters:
  Position = (1115.2, 676.3) = 15 3 12.81 -41 37 49.5
  Extent = 0.7" x 0.6", rotation angle = 13 degrees
  Source counts = 35.1 +/- 6.2
  Background counts = 2.9
  Rate = 0.0004 +/- 7e-05

[Sat Aug  4 17:56:29 2012] Off-axis axis estimate = 5.03'
[Sat Aug  4 23:12:14 2012] Using EEF radius (= 1.19 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 23:12:14 2012] Initial guess for spatial extent in simple fitting = 1.19"
[Sat Aug  4 23:12:14 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.053
[Sat Aug  4 23:12:14 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 1.19"
[Sun Aug  5 00:08:46 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src25.ximg exists
[Sun Aug  5 00:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src25.csv
[Sun Aug  5 00:08:46 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src25_1.ximg exists
[Sun Aug  5 00:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src25.csv
[Sun Aug  5 00:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 00:08:46 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Sun Aug  5 00:08:46 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Aug  5 00:08:46 2012] Fit fullrun_ccd2_acisf13743_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Aug  5 00:51:48 2012] Spatial fit model total counts = 37.285900, observed total counts = 41.000000
[Sun Aug  5 00:51:48 2012] Offset between fit and detection position for source 33 = 0.992641 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.992641 pixels
  Position = (1115.6, 677.2) = 15 3 12.81 -41 37 49.3
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 37.9 +/- 6.2
  Background counts = 0.0
  Rate = 0.0004 +/- 7e-05
[Sun Aug  5 00:51:48 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 00:51:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 00:51:48 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 00:51:48 2012] Source does appear to be extended
[Sun Aug  5 00:51:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 10:32:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:32:09 2012] Initial guess for spatial extent in simple fitting = 1.02"
[Sun Aug  5 10:32:09 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.951
[Sun Aug  5 10:32:09 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 1.02"
[Sun Aug  5 11:25:28 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src25.ximg exists
[Sun Aug  5 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src25.csv
[Sun Aug  5 11:25:28 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src25_1.ximg exists
[Sun Aug  5 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src25.csv
[Sun Aug  5 11:25:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:25:29 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Sun Aug  5 11:25:29 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Aug  5 11:25:29 2012] Fit fullrun_ccd2_acisf13743_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Aug  5 12:03:17 2012] Spatial fit model total counts = 38.204900, observed total counts = 41.000000
[Sun Aug  5 12:03:17 2012] Offset between fit and detection position for source 33 = 0.050598 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.050598 pixels
  Position = (1115.6, 677.2) = 15 3 12.81 -41 37 49.3
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 38.7 +/- 6.2
  Background counts = 0.0
  Rate = 0.0004 +/- 7e-05
[Sun Aug  5 12:03:17 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 12:03:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 12:03:17 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 12:03:17 2012] Source does appear to be extended
[Sun Aug  5 12:03:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 12:38:50 2012] Writing source region out to fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33_src.reg
[Sun Aug  5 12:38:50 2012] Extracting stamp from image fullrun_ccd2_acisf13743_pi14-548_cl_sm2.00.img.gz, (1070, 631) - (1162, 723)
[Sun Aug  5 12:38:50 2012] Writing fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33.gif
[Sun Aug  5 12:55:49 2012] Size of ../../acisf13743/products/events/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33_src.evt.gz[events] = 43 counts
[Sun Aug  5 12:55:49 2012] Mean chipx,y = (676.88, 942.02)
[Sun Aug  5 12:55:49 2012] Mean tdetx,y = (4003.02, 3409.12)
[Sun Aug  5 12:55:49 2012] chipx,y range = (661.00-696.00, 921.00-965.00)
[Sun Aug  5 12:55:49 2012] Size of ../../acisf13743/products/events/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 58 counts
[Sun Aug  5 12:55:51 2012] Not generating rmf since there are only 38 counts
[Sun Aug  5 12:55:51 2012] arf not found, will run specextract
[Sun Aug  5 12:56:20 2012] ../../acisf13743/products/spectra/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33.warf not found
[Sun Aug  5 12:56:20 2012] ../../acisf13743/products/spectra/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33.wrmf not found
[Sun Aug  5 12:56:20 2012] Removal of ../../acisf13743/products/spectra/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33.soff failed
[Sun Aug  5 13:04:44 2012] Spectrum 33 has only 39 counts, deleting rmf
[Sun Aug  5 13:04:44 2012] 175.354
[Sun Aug  5 13:24:06 2012] Updating aperture counts using extracted products
[Sun Aug  5 13:24:06 2012] Error reading totcts from fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33_src.pi.gz
[Sun Aug  5 13:24:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 13:24:06 2012] Using photon index=1.80, rate=0.000418, arf fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src33.arf
[Sun Aug  5 13:24:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Aug  5 13:24:06 2012] Updating source flux to 5.4e-15
[Sun Aug  5 13:26:09 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting