[Sat Aug  4 17:56:28 2012] Detection parameters:
  Position = (785.9, 261.9) = 15 3 27.26 -41 41 13.4
  Extent = 0.8" x 0.6", rotation angle = 174 degrees
  Source counts = 25.5 +/- 6.0
  Background counts = 10.5
  Rate = 0.0003 +/- 6e-05

[Sat Aug  4 17:56:29 2012] Off-axis axis estimate = 2.40'
[Sat Aug  4 23:12:14 2012] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 23:12:14 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Sat Aug  4 23:12:14 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.038
[Sat Aug  4 23:12:14 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 0.48"
[Sun Aug  5 00:08:46 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src33.ximg exists
[Sun Aug  5 00:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src33.csv
[Sun Aug  5 00:08:46 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src33_1.ximg exists
[Sun Aug  5 00:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src33.csv
[Sun Aug  5 00:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13743_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 00:08:46 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Sun Aug  5 00:08:46 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Aug  5 00:08:46 2012] Fit fullrun_ccd2_acisf13743_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Aug  5 00:51:48 2012] Spatial fit model total counts = 111.638000, observed total counts = 114.000000
[Sun Aug  5 00:51:48 2012] Offset between fit and detection position for source 30 = 1.261570 pixels
[Sun Aug  5 00:51:48 2012] 104.943400 total counts/ 62.054500 bgd. counts: snr = 5.444503
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.261570 pixels
  Position = (786.8, 261.0) = 15 3 27.25 -41 41 14.1
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 42.9 +/- 10.2
  Background counts = 62.1
  Rate = 0.0005 +/- 0.0001
[Sun Aug  5 00:51:48 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 00:51:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 00:51:48 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 00:51:48 2012] Source does appear to be extended
[Sun Aug  5 00:51:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 10:32:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug  5 10:32:09 2012] Initial guess for spatial extent in simple fitting = 1.48"
[Sun Aug  5 10:32:09 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.137
[Sun Aug  5 10:32:09 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 1.48"
[Sun Aug  5 11:25:28 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src31.ximg exists
[Sun Aug  5 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src31.csv
[Sun Aug  5 11:25:28 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src31_1.ximg exists
[Sun Aug  5 11:25:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src31.csv
[Sun Aug  5 11:25:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13743_pi14-548_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 11:25:29 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass1_tfrozen_src31.ximg exists
[Sun Aug  5 11:25:29 2012] fullrun_ccd2_acisf13743_pi14-548_cl_pass1_tfrozen_src31_1.ximg exists
[Sun Aug  5 11:25:29 2012] Fit fullrun_ccd2_acisf13743_pi14-548_cl_pass1_tfrozen_src31 appears to have run properly
[Sun Aug  5 12:03:17 2012] Warning, spatial fit 31 centroid is now closest to src. 17
[Sun Aug  5 12:03:17 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 12:03:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 12:03:17 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 12:03:17 2012] Source does appear to be extended
[Sun Aug  5 12:03:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 12:38:50 2012] Writing source region out to fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30_src.reg
[Sun Aug  5 12:38:50 2012] Extracting stamp from image fullrun_ccd2_acisf13743_pi14-548_cl_sm2.00.img.gz, (719, 193) - (855, 329)
[Sun Aug  5 12:38:50 2012] Writing fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30.gif
[Sun Aug  5 12:59:19 2012] Size of ../../acisf13743/products/events/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30_src.evt.gz[events] = 195 counts
[Sun Aug  5 12:59:19 2012] Mean chipx,y = (171.73, 776.66)
[Sun Aug  5 12:59:19 2012] Mean tdetx,y = (3837.66, 3914.27)
[Sun Aug  5 12:59:19 2012] chipx,y range = (147.00-201.00, 745.00-808.00)
[Sun Aug  5 12:59:19 2012] Size of ../../acisf13743/products/events/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 1107 counts
[Sun Aug  5 12:59:20 2012] Not generating rmf since there are only 42 counts
[Sun Aug  5 12:59:20 2012] arf not found, will run specextract
[Sun Aug  5 12:59:47 2012] ../../acisf13743/products/spectra/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30.warf not found
[Sun Aug  5 12:59:47 2012] ../../acisf13743/products/spectra/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30.wrmf not found
[Sun Aug  5 12:59:47 2012] Removal of ../../acisf13743/products/spectra/fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30.soff failed
[Sun Aug  5 13:04:44 2012] Spectrum 30 has only 43 counts, deleting rmf
[Sun Aug  5 13:04:44 2012] 189.257
[Sun Aug  5 13:24:06 2012] Updating aperture counts using extracted products
[Sun Aug  5 13:24:06 2012] Error reading totcts from fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30_src.pi.gz
[Sun Aug  5 13:24:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 13:24:06 2012] Using photon index=1.80, rate=0.000463, arf fullrun_ccd2_acisf13743_pi14-548_pass1_cl_src30.arf
[Sun Aug  5 13:24:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Aug  5 13:24:06 2012] Updating source flux to 5.5e-15
[Sun Aug  5 13:26:09 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting