[Sat Aug 4 17:55:56 2012] Detection parameters: Position = (798.2, 356.5) = 15 2 59.84 -41 51 18.7 Extent = 1.9" x 1.8", rotation angle = 85 degrees Source counts = 32.8 +/- 9.1 Background counts = 50.2 Rate = 0.0004 +/- 0.0001 [Sat Aug 4 17:55:56 2012] Off-axis axis estimate = 9.14' [Sat Aug 4 22:48:18 2012] Using EEF radius (= 3.69 ")to estimate initial spatial extent for simple fitting [Sat Aug 4 22:48:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Aug 4 22:48:18 2012] Initial guess for spatial extent in simple fitting = 3.69" [Sat Aug 4 22:48:18 2012] source mask rpix=7.5, npix_max = 256, mask sum = 256, frac = 0.998 [Sat Aug 4 22:48:18 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 3.69" [Sat Aug 4 23:12:13 2012] fullrun_ccd1_acisf13743_pi14-548_cl_pass0_src8.ximg exists [Sat Aug 4 23:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13743_pi14-548_cl_pass0_src8.csv [Sat Aug 4 23:12:13 2012] fullrun_ccd1_acisf13743_pi14-548_cl_pass0_src8_1.ximg exists [Sat Aug 4 23:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13743_pi14-548_cl_pass0_src8.csv [Sat Aug 4 23:12:13 2012] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf13743_pi14-548_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf13743_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 4 23:12:13 2012] fullrun_ccd1_acisf13743_pi14-548_cl_pass0_tfrozen_src8.ximg exists [Sat Aug 4 23:12:13 2012] fullrun_ccd1_acisf13743_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists [Sat Aug 4 23:12:13 2012] Fit fullrun_ccd1_acisf13743_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly [Sun Aug 5 00:51:41 2012] Spatial fit model total counts = 163.349000, observed total counts = 166.000000 [Sun Aug 5 00:51:41 2012] Offset between fit and detection position for source 16 = 1.765896 pixels [Sun Aug 5 00:51:41 2012] 164.757800 total counts/ 145.809000 bgd. counts: snr = 1.569241 Spatial fit parameters: Offset between fit and detection position for source 16 = 1.765896 pixels Position = (796.5, 356.4) = 15 2 59.94 -41 51 19.0 Extent = 1.6 (0.9-3.1)", rotation angle = 0 Source counts = 18.9 +/- 12.8 Background counts = 145.8 Rate = 0.0002 +/- 0.0001 Deleting source due to low Poisson probability