[Sat Aug 4 17:55:23 2012] Detection parameters: Position = (732.0, 688.0) = 15 3 44.91 -41 45 39.8 Extent = 0.8" x 0.7", rotation angle = 138 degrees Source counts = 36.0 +/- 9.2 Background counts = 48.0 Rate = 0.0004 +/- 0.0001 [Sat Aug 4 17:55:24 2012] Off-axis axis estimate = 5.87' [Sat Aug 4 18:06:06 2012] Using EEF radius (= 1.57 ")to estimate initial spatial extent for simple fitting [Sat Aug 4 18:06:06 2012] Initial guess for spatial extent in simple fitting = 1.57" [Sat Aug 4 18:06:06 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.177 [Sat Aug 4 18:06:06 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 1.57" [Sat Aug 4 22:48:17 2012] fullrun_ccd0_acisf13743_pi14-548_cl_pass0_src50.ximg exists [Sat Aug 4 22:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13743_pi14-548_cl_pass0_src50.csv [Sat Aug 4 22:48:17 2012] fullrun_ccd0_acisf13743_pi14-548_cl_pass0_src50_1.ximg exists [Sat Aug 4 22:48:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13743_pi14-548_cl_pass0_src50.csv [Sat Aug 4 22:48:17 2012] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf13743_pi14-548_cl_pass0_src50_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf13743_pi14-548_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 4 22:48:18 2012] fullrun_ccd0_acisf13743_pi14-548_cl_pass0_tfrozen_src50.ximg exists [Sat Aug 4 22:48:18 2012] fullrun_ccd0_acisf13743_pi14-548_cl_pass0_tfrozen_src50_1.ximg exists [Sat Aug 4 22:48:18 2012] Fit fullrun_ccd0_acisf13743_pi14-548_cl_pass0_tfrozen_src50 appears to have run properly [Sun Aug 5 00:51:39 2012] Spatial fit model total counts = 354.310000, observed total counts = 359.000000 [Sun Aug 5 00:51:39 2012] Offset between fit and detection position for source 55 = 0.942563 pixels [Sun Aug 5 00:51:39 2012] 355.508800 total counts/ 329.889000 bgd. counts: snr = 1.410561 Spatial fit parameters: Offset between fit and detection position for source 55 = 0.942563 pixels Position = (732.3, 688.9) = 15 3 44.91 -41 45 39.6 Extent = 0.8 (0.5-1.7)", rotation angle = 0 Source counts = 25.6 +/- 18.9 Background counts = 329.9 Rate = 0.0003 +/- 0.0002 Deleting source due to low Poisson probability