[Tue May 14 22:02:43 2013] Detection parameters:
  Position = (993.5, 152.5) = 15 2 17.85 -42 6 10.1
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 329.0 +/- 18.4
  Background counts = 11.0
  Rate = 0.003 +/- 0.0002

[Tue May 14 22:02:44 2013] Off-axis axis estimate = 0.84'
[Wed May 15 00:41:47 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed May 15 00:41:47 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Wed May 15 00:41:47 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.384
[Wed May 15 00:41:47 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Wed May 15 01:11:11 2013] fullrun_ccd2_acisf13739_pi14-548_cl_pass0_src1.ximg exists
[Wed May 15 01:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13739_pi14-548_cl_pass0_src1.csv
[Wed May 15 01:11:11 2013] fullrun_ccd2_acisf13739_pi14-548_cl_pass0_src1_1.ximg exists
[Wed May 15 01:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13739_pi14-548_cl_pass0_src1.csv
[Wed May 15 01:11:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13739_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13739_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 01:11:12 2013] fullrun_ccd2_acisf13739_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed May 15 01:11:12 2013] fullrun_ccd2_acisf13739_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 15 01:11:12 2013] Fit fullrun_ccd2_acisf13739_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 15 03:10:09 2013] Spatial fit model total counts = 542.111000, observed total counts = 493.000000
[Wed May 15 03:10:09 2013] Offset between fit and detection position for source 9 = 0.670408 pixels
[Wed May 15 03:10:09 2013] 543.788200 total counts/ 81.255200 bgd. counts: snr = 51.311787
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.670408 pixels
  Position = (993.8, 153.1) = 15 2 17.86 -42 6 10.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 462.5 +/- 23.3
  Background counts = 81.3
  Rate = 0.005 +/- 0.0002
[Wed May 15 03:10:09 2013] Vigneting correction estimate = 1.000000
[Wed May 15 03:10:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 03:10:09 2013] Assessing source extent using major axis lower bound
[Wed May 15 03:10:09 2013] Source does appear to be extended
[Wed May 15 03:10:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 05:43:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 05:43:50 2013] Initial guess for spatial extent in simple fitting = 0.40"
[Wed May 15 05:43:50 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.572
[Wed May 15 05:43:50 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.40"
[Wed May 15 06:05:44 2013] fullrun_ccd2_acisf13739_pi14-548_cl_pass1_src1.ximg exists
[Wed May 15 06:05:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13739_pi14-548_cl_pass1_src1.csv
[Wed May 15 06:05:44 2013] fullrun_ccd2_acisf13739_pi14-548_cl_pass1_src1_1.ximg exists
[Wed May 15 06:05:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13739_pi14-548_cl_pass1_src1.csv
[Wed May 15 06:05:44 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13739_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13739_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 06:05:44 2013] fullrun_ccd2_acisf13739_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed May 15 06:05:44 2013] fullrun_ccd2_acisf13739_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 15 06:05:44 2013] Fit fullrun_ccd2_acisf13739_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 15 09:23:17 2013] Spatial fit model total counts = 542.641000, observed total counts = 495.000000
[Wed May 15 09:23:17 2013] Offset between fit and detection position for source 9 = 0.001723 pixels
[Wed May 15 09:23:17 2013] 543.633700 total counts/ 80.438700 bgd. counts: snr = 51.645364
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.001723 pixels
  Position = (993.8, 153.1) = 15 2 17.86 -42 6 10.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 463.2 +/- 23.3
  Background counts = 80.4
  Rate = 0.005 +/- 0.0002
[Wed May 15 09:23:17 2013] Vigneting correction estimate = 1.000000
[Wed May 15 09:23:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 09:23:17 2013] Assessing source extent using major axis lower bound
[Wed May 15 09:23:17 2013] Source does appear to be extended
[Wed May 15 09:23:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 10:02:57 2013] Writing source region out to fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9_src.reg
[Wed May 15 10:02:57 2013] Extracting stamp from image fullrun_ccd2_acisf13739_pi14-548_cl_sm2.00.img.gz, (975, 135) - (1012, 172)
[Wed May 15 10:02:57 2013] Writing fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9.gif
[Wed May 15 10:02:59 2013] Size of ../../acisf13739/products/events/fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9_src.evt.gz[events] = 435 counts
[Wed May 15 10:02:59 2013] Mean chipx,y = (133.28, 980.56)
[Wed May 15 10:02:59 2013] Mean tdetx,y = (4041.56, 3952.72)
[Wed May 15 10:02:59 2013] chipx,y range = (113.00-153.00, 958.00-1001.00)
[Wed May 15 10:02:59 2013] Size of ../../acisf13739/products/events/fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 102 counts
[Wed May 15 10:03:01 2013] rmf not found, will run specextract
[Wed May 15 10:03:01 2013] arf not found, will run specextract
[Wed May 15 10:03:39 2013] ../../acisf13739/products/spectra/fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9.warf not found
[Wed May 15 10:03:39 2013] ../../acisf13739/products/spectra/fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9.wrmf not found
[Wed May 15 10:03:39 2013] Removal of ../../acisf13739/products/spectra/fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9.soff failed
[Wed May 15 10:18:53 2013] Keeping rmf generated by specextract
[Wed May 15 10:18:53 2013] 184.437
[Wed May 15 10:41:28 2013] Updating aperture counts using extracted products
[Wed May 15 10:41:28 2013] Total counts from fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9_src.pi.gz = 435.00
[Wed May 15 10:41:28 2013] Total counts from fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9_bgd.pi.gz = 102.00
[Wed May 15 10:41:28 2013] Got source and background scale factors 0.000001, 0.000006
[Wed May 15 10:41:28 2013] User source parameters:
  Position = (993.8, 153.1) = 15 2 17.86 -42 6 10.1
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source aperture counts = 426.3 +/- 21.9
  Background aperture counts = 8.7
  Rate = 0.004 +/- 0.0002

[Wed May 15 10:41:31 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 10:41:31 2013] Using photon index=1.80, rate=0.00463, arf fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9.arf
[Wed May 15 10:41:31 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 15 10:41:31 2013] Updating source flux to 5.7e-14
[Wed May 15 10:42:53 2013] Reading fit data from acisf13739/analysis//spectral/fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9_pl.csv
[Wed May 15 10:42:53 2013] Spectral fit parameter nH value = 1.22944e+22
[Wed May 15 10:42:53 2013] Spectral fit parameter PhoIndex value = 2.05067
[Wed May 15 10:42:53 2013] Failed to get F(0.3-8.0) from acisf13739/analysis//spectral/fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Wed May 15 10:42:53 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 10:42:53 2013] Using Nh = 1.2e+22, photon index=2.05, rate=0.00463, arf fullrun_ccd2_acisf13739_pi14-548_pass1_cl_src9.arf
[Wed May 15 10:42:53 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 15 10:42:53 2013] Updating source flux to 7.1e-14