[Tue May 14 22:02:15 2013] Detection parameters:
  Position = (210.9, 756.8) = 15 2 14.38 -42 10 56.8
  Extent = 0.8" x 0.5", rotation angle = 90 degrees
  Source counts = 23.8 +/- 5.1
  Background counts = 2.2
  Rate = 0.0002 +/- 5e-05

[Tue May 14 22:02:15 2013] Off-axis axis estimate = 4.14'
[Tue May 14 23:39:22 2013] Using EEF radius (= 0.87 ")to estimate initial spatial extent for simple fitting
[Tue May 14 23:39:22 2013] Initial guess for spatial extent in simple fitting = 0.87"
[Tue May 14 23:39:22 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.723
[Tue May 14 23:39:22 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 0.87"
[Wed May 15 00:41:47 2013] fullrun_ccd1_acisf13739_pi14-548_cl_pass0_src26.ximg exists
[Wed May 15 00:41:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13739_pi14-548_cl_pass0_src26.csv
[Wed May 15 00:41:47 2013] fullrun_ccd1_acisf13739_pi14-548_cl_pass0_src26_1.ximg exists
[Wed May 15 00:41:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13739_pi14-548_cl_pass0_src26.csv
[Wed May 15 00:41:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13739_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13739_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 00:41:47 2013] fullrun_ccd1_acisf13739_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Wed May 15 00:41:47 2013] fullrun_ccd1_acisf13739_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Wed May 15 00:41:47 2013] Fit fullrun_ccd1_acisf13739_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Wed May 15 03:10:05 2013] Spatial fit model total counts = 32.596100, observed total counts = 33.000000
[Wed May 15 03:10:05 2013] Offset between fit and detection position for source 10 = 1.488490 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.488490 pixels
  Position = (211.3, 758.2) = 15 2 14.39 -42 10 56.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 32.2 +/- 5.7
  Background counts = 0.0
  Rate = 0.0003 +/- 6e-05
[Wed May 15 03:10:05 2013] Vigneting correction estimate = 1.000000
[Wed May 15 03:10:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 03:10:05 2013] Assessing source extent using major axis lower bound
[Wed May 15 03:10:05 2013] Source does appear to be extended
[Wed May 15 03:10:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 04:56:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 04:56:09 2013] Initial guess for spatial extent in simple fitting = 0.58"
[Wed May 15 04:56:09 2013] source mask rpix=1.2, npix_max = 11, mask sum = 6, frac = 0.534
[Wed May 15 04:56:09 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 0.58"
[Wed May 15 05:43:49 2013] fullrun_ccd1_acisf13739_pi14-548_cl_pass1_src24.ximg exists
[Wed May 15 05:43:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13739_pi14-548_cl_pass1_src24.csv
[Wed May 15 05:43:49 2013] fullrun_ccd1_acisf13739_pi14-548_cl_pass1_src24_1.ximg exists
[Wed May 15 05:43:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13739_pi14-548_cl_pass1_src24.csv
[Wed May 15 05:43:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13739_pi14-548_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13739_pi14-548_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 05:43:49 2013] fullrun_ccd1_acisf13739_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Wed May 15 05:43:49 2013] fullrun_ccd1_acisf13739_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Wed May 15 05:43:49 2013] Fit fullrun_ccd1_acisf13739_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Wed May 15 09:23:14 2013] Spatial fit model total counts = 33.764000, observed total counts = 33.000000
[Wed May 15 09:23:14 2013] Offset between fit and detection position for source 10 = 0.066420 pixels
[Wed May 15 09:23:14 2013] 33.584898 total counts/ 0.135098 bgd. counts: snr = 91.005799
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.066420 pixels
  Position = (211.2, 758.3) = 15 2 14.39 -42 10 56.3
  Extent = 0.5 (0.5-0.7)", rotation angle = 0
  Source counts = 33.4 +/- 5.8
  Background counts = 0.1
  Rate = 0.0003 +/- 6e-05
[Wed May 15 09:23:14 2013] Vigneting correction estimate = 1.000000
[Wed May 15 09:23:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 09:23:14 2013] Assessing source extent using major axis lower bound
[Wed May 15 09:23:14 2013] Source does appear to be extended
[Wed May 15 09:23:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 09:46:10 2013] Writing source region out to fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10_src.reg
[Wed May 15 09:46:10 2013] Extracting stamp from image fullrun_ccd1_acisf13739_pi14-548_cl_sm2.00.img.gz, (187, 734) - (235, 782)
[Wed May 15 09:46:10 2013] Writing fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10.gif
[Wed May 15 09:59:10 2013] Size of ../../acisf13739/products/events/fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10_src.evt.gz[events] = 29 counts
[Wed May 15 09:59:10 2013] Mean chipx,y = (410.00, 920.00)
[Wed May 15 09:59:10 2013] Mean tdetx,y = (4212.00, 4517.00)
[Wed May 15 09:59:10 2013] chipx,y range = (394.00-427.00, 902.00-937.00)
[Wed May 15 09:59:10 2013] Size of ../../acisf13739/products/events/fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 18 counts
[Wed May 15 09:59:11 2013] Not generating rmf since there are only 33 counts
[Wed May 15 09:59:11 2013] arf not found, will run specextract
[Wed May 15 09:59:38 2013] ../../acisf13739/products/spectra/fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10.warf not found
[Wed May 15 09:59:38 2013] ../../acisf13739/products/spectra/fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10.wrmf not found
[Wed May 15 09:59:38 2013] Removal of ../../acisf13739/products/spectra/fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10.soff failed
[Wed May 15 10:02:57 2013] Spectrum 10 has only 33 counts, deleting rmf
[Wed May 15 10:02:57 2013] 176.449
[Wed May 15 10:41:26 2013] Updating aperture counts using extracted products
[Wed May 15 10:41:26 2013] Total counts from fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10_src.pi.gz = 29.00
[Wed May 15 10:41:26 2013] Total counts from fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10_bgd.pi.gz = 18.00
[Wed May 15 10:41:26 2013] Got source and background scale factors 0.000001, 0.000010
[Wed May 15 10:41:26 2013] User source parameters:
  Position = (211.2, 758.3) = 15 2 14.39 -42 10 56.3
  Extent = 0.5 (0.5-0.7)", rotation angle = 0
  Source aperture counts = 27.5 +/- 6.5
  Background aperture counts = 1.5
  Rate = 0.0003 +/- 6e-05

[Wed May 15 10:41:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 10:41:28 2013] Using photon index=1.80, rate=0.000334, arf fullrun_ccd1_acisf13739_pi14-548_pass1_cl_src10.arf
[Wed May 15 10:41:28 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 15 10:41:28 2013] Updating source flux to 4.3e-15
[Wed May 15 10:42:32 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting