[Fri Aug 10 22:42:47 2012] Detection parameters:
  Position = (247.4, 801.1) = 15 1 34.63 -41 55 22.5
  Extent = 0.7" x 0.5", rotation angle = 135 degrees
  Source counts = 17.8 +/- 5.0
  Background counts = 7.2
  Rate = 0.0002 +/- 7e-05

[Fri Aug 10 22:42:48 2012] Off-axis axis estimate = 3.05'
[Sat Aug 11 01:00:23 2012] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 01:00:23 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Sat Aug 11 01:00:23 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.039
[Sat Aug 11 01:00:23 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.59"
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src27.ximg exists
[Sat Aug 11 01:46:43 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src27.csv
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src27_1.ximg exists
[Sat Aug 11 01:46:43 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src27.csv
[Sat Aug 11 01:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Aug 11 01:46:43 2012] Fit fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Sat Aug 11 01:47:05 2012] Spatial fit model total counts = 41.899000, observed total counts = 42.000000
[Sat Aug 11 01:47:05 2012] Offset between fit and detection position for source 7 = 0.665714 pixels
[Sat Aug 11 01:47:05 2012] 41.975400 total counts/ 26.305200 bgd. counts: snr = 3.055299
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.665714 pixels
  Position = (247.8, 801.6) = 15 1 34.63 -41 55 22.4
  Extent = 0.4 (0.2-0.5)", rotation angle = 0
  Source counts = 15.7 +/- 6.5
  Background counts = 26.3
  Rate = 0.0002 +/- 9e-05
[Sat Aug 11 01:47:05 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 01:47:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 01:47:05 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 01:47:05 2012] Source does appear to be extended
[Sat Aug 11 01:47:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 03:49:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 03:49:52 2012] Initial guess for spatial extent in simple fitting = 0.35"
[Sat Aug 11 03:49:52 2012] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.015
[Sat Aug 11 03:49:52 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 0.35"
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src23.ximg exists
[Sat Aug 11 04:23:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src23.csv
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src23_1.ximg exists
[Sat Aug 11 04:23:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src23.csv
[Sat Aug 11 04:23:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Aug 11 04:23:31 2012] Fit fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Aug 11 04:23:48 2012] Spatial fit model total counts = 41.999700, observed total counts = 42.000000
[Sat Aug 11 04:23:48 2012] Offset between fit and detection position for source 7 = 0.023944 pixels
[Sat Aug 11 04:23:48 2012] 42.078900 total counts/ 26.356800 bgd. counts: snr = 3.062416
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.023944 pixels
  Position = (247.8, 801.6) = 15 1 34.63 -41 55 22.4
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 15.7 +/- 6.5
  Background counts = 26.4
  Rate = 0.0002 +/- 9e-05
[Sat Aug 11 04:23:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:23:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:23:49 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 04:23:49 2012] Source does appear to be extended
[Sat Aug 11 04:23:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:57:18 2012] Writing source region out to fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7_src.reg
[Sat Aug 11 04:57:18 2012] Extracting stamp from image fullrun_ccd3_acisf13738_pi14-548_cl_sm2.00.img.gz, (232, 786) - (263, 817)
[Sat Aug 11 04:57:18 2012] Writing fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7.gif
[Sat Aug 11 05:11:07 2012] Size of ../../acisf13738/products/events/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7_src.evt.gz[events] = 17 counts
[Sat Aug 11 05:11:07 2012] Mean chipx,y = (595.18, 961.18)
[Sat Aug 11 05:11:07 2012] Mean tdetx,y = (4170.82, 3656.18)
[Sat Aug 11 05:11:07 2012] chipx,y range = (574.00-607.00, 944.00-975.00)
[Sat Aug 11 05:11:07 2012] Size of ../../acisf13738/products/events/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 25 counts
[Sat Aug 11 05:11:09 2012] Not generating rmf since there are only 15 counts
[Sat Aug 11 05:11:09 2012] arf not found, will run specextract
[Sat Aug 11 05:11:44 2012] ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7.warf not found
[Sat Aug 11 05:11:44 2012] ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7.wrmf not found
[Sat Aug 11 05:11:44 2012] Removal of ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7.soff failed
[Sat Aug 11 05:15:29 2012] Spectrum 7 has only 16 counts, deleting rmf
[Sat Aug 11 05:15:29 2012] 189.766
[Sat Aug 11 05:15:34 2012] Updating aperture counts using extracted products
[Sat Aug 11 05:15:34 2012] Error reading totcts from fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Aug 11 05:15:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 05:15:35 2012] Using photon index=1.80, rate=0.000214, arf fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src7.arf
[Sat Aug 11 05:15:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Aug 11 05:15:35 2012] Updating source flux to 2.6e-15
[Sat Aug 11 05:16:10 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting