[Fri Aug 10 22:42:47 2012] Detection parameters:
  Position = (1185.5, 899.6) = 15 0 53.29 -41 54 33.3
  Extent = 2.4" x 2.2", rotation angle = 58 degrees
  Source counts = 47.1 +/- 8.7
  Background counts = 27.9
  Rate = 0.0006 +/- 0.0001

[Fri Aug 10 22:42:48 2012] Off-axis axis estimate = 9.96'
[Sat Aug 11 01:00:23 2012] Using EEF radius (= 4.39 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 01:00:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 01:00:23 2012] Initial guess for spatial extent in simple fitting = 4.39"
[Sat Aug 11 01:00:23 2012] source mask rpix=8.9, npix_max = 355, mask sum = 361, frac = 1.016
[Sat Aug 11 01:00:23 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 4.39"
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src12.ximg exists
[Sat Aug 11 01:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src12.csv
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Aug 11 01:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src12.csv
[Sat Aug 11 01:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Aug 11 01:46:43 2012] Fit fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Aug 11 01:47:05 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 49.496899 pixels away
[Sat Aug 11 01:47:05 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 01:47:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 01:47:05 2012] Assessing source extent using major
[Sat Aug 11 01:47:05 2012] Source does appear to be extended
[Sat Aug 11 01:47:05 2012] Computing asymmetry using major and minor axis, asym = 1.09
[Sat Aug 11 03:49:52 2012] Using EEF radius (= 4.39 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 03:49:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 03:49:52 2012] Initial guess for spatial extent in simple fitting = 4.39"
[Sat Aug 11 03:49:52 2012] source mask rpix=8.9, npix_max = 355, mask sum = 361, frac = 1.016
[Sat Aug 11 03:49:52 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.39"
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src10.ximg exists
[Sat Aug 11 04:23:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src10.csv
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Aug 11 04:23:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src10.csv
[Sat Aug 11 04:23:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Aug 11 04:23:31 2012] Fit fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Aug 11 04:23:48 2012] Spatial fit model total counts = 88.991100, observed total counts = 89.000000
[Sat Aug 11 04:23:48 2012] Offset between fit and detection position for source 42 = 1.062392 pixels
[Sat Aug 11 04:23:48 2012] 89.570700 total counts/ 42.347800 bgd. counts: snr = 7.256668
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 1.062392 pixels
  Position = (1185.4, 898.6) = 15 0 53.31 -41 54 34.1
  Extent = 3.6 (2.7-5.3)", rotation angle = 0
  Source counts = 47.2 +/- 9.5
  Background counts = 42.3
  Rate = 0.0006 +/- 0.0001
[Sat Aug 11 04:23:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:23:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:23:49 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 04:23:49 2012] Source does appear to be extended
[Sat Aug 11 04:23:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:57:18 2012] Writing source region out to fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42_src.reg
[Sat Aug 11 04:57:18 2012] Extracting stamp from image fullrun_ccd3_acisf13738_pi14-548_cl_sm2.00.img.gz, (1020, 733) - (1351, 1064)
[Sat Aug 11 04:57:18 2012] Writing fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42.gif
[Sat Aug 11 05:01:58 2012] Size of ../../acisf13738/products/events/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42_src.evt.gz[events] = 87 counts
[Sat Aug 11 05:01:58 2012] Mean chipx,y = (98.52, 151.03)
[Sat Aug 11 05:01:58 2012] Mean tdetx,y = (4980.97, 3159.52)
[Sat Aug 11 05:01:58 2012] chipx,y range = (57.00-131.00, 107.00-192.00)
[Sat Aug 11 05:01:58 2012] Size of ../../acisf13738/products/events/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 445 counts
[Sat Aug 11 05:01:59 2012] Not generating rmf since there are only 47 counts
[Sat Aug 11 05:01:59 2012] arf not found, will run specextract
[Sat Aug 11 05:02:15 2012] ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42.warf not found
[Sat Aug 11 05:02:15 2012] ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42.wrmf not found
[Sat Aug 11 05:02:15 2012] Removal of ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42.soff failed
[Sat Aug 11 05:15:29 2012] Spectrum 42 has only 47 counts, deleting rmf
[Sat Aug 11 05:15:29 2012] 155.692
[Sat Aug 11 05:15:34 2012] Updating aperture counts using extracted products
[Sat Aug 11 05:15:34 2012] Error reading totcts from fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42_src.pi.gz
[Sat Aug 11 05:15:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 05:15:34 2012] Using photon index=1.80, rate=0.000643, arf fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src42.arf
[Sat Aug 11 05:15:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Aug 11 05:15:34 2012] Updating source flux to 9.7e-15
[Sat Aug 11 05:16:10 2012] Source 42 has fewer than 100.000000 counts, skipping spectral fitting