[Fri Aug 10 22:42:47 2012] Detection parameters:
  Position = (1075.3, 437.2) = 15 0 58.09 -41 58 21.0
  Extent = 3.7" x 2.3", rotation angle = 107 degrees
  Source counts = 206.4 +/- 15.7
  Background counts = 39.6
  Rate = 0.003 +/- 0.0002

[Fri Aug 10 22:42:48 2012] Off-axis axis estimate = 8.48'
[Sat Aug 11 01:00:23 2012] Using EEF radius (= 3.18 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 01:00:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 01:00:23 2012] Initial guess for spatial extent in simple fitting = 3.18"
[Sat Aug 11 01:00:23 2012] source mask rpix=6.5, npix_max = 194, mask sum = 196, frac = 1.010
[Sat Aug 11 01:00:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.18"
[Sat Aug 11 01:46:42 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src1.ximg exists
[Sat Aug 11 01:46:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src1.csv
[Sat Aug 11 01:46:42 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Aug 11 01:46:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src1.csv
[Sat Aug 11 01:46:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13738_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 11 01:46:43 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 11 01:46:43 2012] Fit fullrun_ccd3_acisf13738_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 11 01:47:05 2012] Spatial fit model total counts = 245.080000, observed total counts = 245.000000
[Sat Aug 11 01:47:05 2012] Offset between fit and detection position for source 1 = 1.492762 pixels
[Sat Aug 11 01:47:05 2012] 244.979200 total counts/ 58.753200 bgd. counts: snr = 24.295428
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.492762 pixels
  Position = (1076.5, 436.3) = 15 0 58.06 -41 58 21.6
  Extent = 2.3 (2.0-2.6)", rotation angle = 0
  Source counts = 186.2 +/- 15.7
  Background counts = 58.8
  Rate = 0.003 +/- 0.0002
[Sat Aug 11 01:47:05 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 01:47:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 01:47:05 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 01:47:05 2012] Source does appear to be extended
[Sat Aug 11 01:47:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 03:49:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 03:49:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 03:49:52 2012] Initial guess for spatial extent in simple fitting = 2.26"
[Sat Aug 11 03:49:52 2012] source mask rpix=4.6, npix_max = 104, mask sum = 110, frac = 1.056
[Sat Aug 11 03:49:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.26"
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src1.ximg exists
[Sat Aug 11 04:23:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src1.csv
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Aug 11 04:23:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src1.csv
[Sat Aug 11 04:23:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13738_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 11 04:23:31 2012] fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 11 04:23:31 2012] Fit fullrun_ccd3_acisf13738_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 11 04:23:48 2012] Spatial fit model total counts = 225.000000, observed total counts = 225.000000
[Sat Aug 11 04:23:48 2012] Offset between fit and detection position for source 1 = 0.244579 pixels
[Sat Aug 11 04:23:48 2012] 225.067300 total counts/ 62.755300 bgd. counts: snr = 20.489220
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.244579 pixels
  Position = (1076.4, 436.5) = 15 0 58.07 -41 58 21.5
  Extent = 1.9 (1.7-2.3)", rotation angle = 0
  Source counts = 162.3 +/- 15.0
  Background counts = 62.8
  Rate = 0.002 +/- 0.0002
[Sat Aug 11 04:23:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:23:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:23:49 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 04:23:49 2012] Source does appear to be extended
[Sat Aug 11 04:23:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:57:17 2012] Writing source region out to fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1_src.reg
[Sat Aug 11 04:57:17 2012] Extracting stamp from image fullrun_ccd3_acisf13738_pi14-548_cl_sm2.00.img.gz, (989, 349) - (1163, 524)
[Sat Aug 11 04:57:17 2012] Writing fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1.gif
[Sat Aug 11 04:57:20 2012] Size of ../../acisf13738/products/events/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1_src.evt.gz[events] = 206 counts
[Sat Aug 11 04:57:20 2012] Mean chipx,y = (567.33, 52.53)
[Sat Aug 11 04:57:20 2012] Mean tdetx,y = (5079.47, 3628.33)
[Sat Aug 11 04:57:20 2012] chipx,y range = (536.00-592.00, 24.00-78.00)
[Sat Aug 11 04:57:20 2012] Size of ../../acisf13738/products/events/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 131 counts
[Sat Aug 11 04:57:21 2012] rmf not found, will run specextract
[Sat Aug 11 04:57:21 2012] arf not found, will run specextract
[Sat Aug 11 04:57:30 2012] ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1.warf not found
[Sat Aug 11 04:57:30 2012] ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1.wrmf not found
[Sat Aug 11 04:57:30 2012] Removal of ../../acisf13738/products/spectra/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1.soff failed
[Sat Aug 11 05:15:28 2012] Keeping rmf generated by specextract
[Sat Aug 11 05:15:28 2012] 167.51
[Sat Aug 11 05:15:34 2012] Updating aperture counts using extracted products
[Sat Aug 11 05:15:34 2012] Error reading totcts from fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Aug 11 05:15:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 05:15:34 2012] Using photon index=1.80, rate=0.00221, arf fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1.arf
[Sat Aug 11 05:15:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Aug 11 05:15:34 2012] Updating source flux to 3.1e-14
[Sat Aug 11 05:16:13 2012] Reading fit data from acisf13738/analysis//spectral/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1_pl.csv
[Sat Aug 11 05:16:13 2012] Spectral fit parameter nH value = 3.41043e+13
[Sat Aug 11 05:16:13 2012] Spectral fit parameter PhoIndex value = 1.25791
[Sat Aug 11 05:16:13 2012] Failed to get F(0.3-8.0) from acisf13738/analysis//spectral/fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug 11 05:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 05:16:13 2012] Using Nh = 3.4e+13, photon index=1.26, rate=0.00221, arf fullrun_ccd3_acisf13738_pi14-548_pass1_cl_src1.arf
[Sat Aug 11 05:16:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Aug 11 05:16:13 2012] Updating source flux to 3.7e-14