[Fri Aug 10 22:41:40 2012] Detection parameters:
  Position = (629.0, 700.7) = 15 1 38.07 -42 3 52.4
  Extent = 0.5" x 0.5", rotation angle = 106 degrees
  Source counts = 19.8 +/- 5.7
  Background counts = 13.2
  Rate = 0.0003 +/- 8e-05

[Fri Aug 10 22:41:41 2012] Off-axis axis estimate = 6.05'
[Fri Aug 10 23:25:23 2012] Using EEF radius (= 1.65 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 23:25:23 2012] Initial guess for spatial extent in simple fitting = 1.65"
[Fri Aug 10 23:25:23 2012] source mask rpix=3.4, npix_max = 59, mask sum = 54, frac = 0.906
[Fri Aug 10 23:25:23 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 1.65"
[Sat Aug 11 00:40:12 2012] fullrun_ccd1_acisf13738_pi14-548_cl_pass0_src36.ximg exists
[Sat Aug 11 00:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13738_pi14-548_cl_pass0_src36.csv
[Sat Aug 11 00:40:12 2012] fullrun_ccd1_acisf13738_pi14-548_cl_pass0_src36_1.ximg exists
[Sat Aug 11 00:40:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13738_pi14-548_cl_pass0_src36.csv
[Sat Aug 11 00:40:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13738_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13738_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 00:40:13 2012] fullrun_ccd1_acisf13738_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Sat Aug 11 00:40:13 2012] fullrun_ccd1_acisf13738_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Sat Aug 11 00:40:13 2012] Fit fullrun_ccd1_acisf13738_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Sat Aug 11 01:46:57 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.665878 pixels away
[Sat Aug 11 01:46:57 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 01:46:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 01:46:57 2012] Assessing source extent using major
[Sat Aug 11 01:46:57 2012] Source does appear to be extended
[Sat Aug 11 01:46:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 02:12:22 2012] Using EEF radius (= 1.65 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 02:12:22 2012] Initial guess for spatial extent in simple fitting = 1.65"
[Sat Aug 11 02:12:22 2012] source mask rpix=3.4, npix_max = 59, mask sum = 54, frac = 0.906
[Sat Aug 11 02:12:22 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 1.65"
[Sat Aug 11 03:31:41 2012] fullrun_ccd1_acisf13738_pi14-548_cl_pass1_src33.ximg exists
[Sat Aug 11 03:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13738_pi14-548_cl_pass1_src33.csv
[Sat Aug 11 03:31:41 2012] fullrun_ccd1_acisf13738_pi14-548_cl_pass1_src33_1.ximg exists
[Sat Aug 11 03:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13738_pi14-548_cl_pass1_src33.csv
[Sat Aug 11 03:31:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13738_pi14-548_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13738_pi14-548_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 03:31:41 2012] fullrun_ccd1_acisf13738_pi14-548_cl_pass1_tfrozen_src33.ximg exists
[Sat Aug 11 03:31:41 2012] fullrun_ccd1_acisf13738_pi14-548_cl_pass1_tfrozen_src33_1.ximg exists
[Sat Aug 11 03:31:41 2012] Fit fullrun_ccd1_acisf13738_pi14-548_cl_pass1_tfrozen_src33 appears to have run properly
[Sat Aug 11 04:23:42 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 25.361541 pixels away
[Sat Aug 11 04:23:42 2012] Spatial fit model total counts = 180.914000, observed total counts = 190.000000
[Sat Aug 11 04:23:42 2012] Offset between fit and detection position for source 5 = 8.089571 pixels
[Sat Aug 11 04:23:42 2012] 177.044000 total counts/ 38.635000 bgd. counts: snr = 22.267624
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 8.089571 pixels
  Position = (622.5, 705.5) = 15 1 38.38 -42 3 50.2
  Extent = 3.3 (2.4-6.6)", rotation angle = 0
  Source counts = 138.4 +/- 13.3
  Background counts = 38.6
  Rate = 0.002 +/- 0.0002
[Sat Aug 11 04:23:42 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 04:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 04:23:42 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 04:23:42 2012] Source does appear to be extended
[Sat Aug 11 04:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 04:31:01 2012] Writing source region out to fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5_src.reg
[Sat Aug 11 04:31:01 2012] Extracting stamp from image fullrun_ccd1_acisf13738_pi14-548_cl_sm2.00.img.gz, (471, 554) - (774, 857)
[Sat Aug 11 04:31:01 2012] Writing fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5.gif
[Sat Aug 11 04:44:06 2012] Size of ../../acisf13738/products/events/fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5_src.evt.gz[events] = 651 counts
[Sat Aug 11 04:44:06 2012] Mean chipx,y = (516.16, 600.76)
[Sat Aug 11 04:44:06 2012] Mean tdetx,y = (4531.24, 4623.16)
[Sat Aug 11 04:44:06 2012] chipx,y range = (474.00-556.00, 558.00-636.00)
[Sat Aug 11 04:44:06 2012] Size of ../../acisf13738/products/events/fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 3986 counts
[Sat Aug 11 04:44:08 2012] rmf not found, will run specextract
[Sat Aug 11 04:44:08 2012] arf not found, will run specextract
[Sat Aug 11 04:44:31 2012] ../../acisf13738/products/spectra/fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5.warf not found
[Sat Aug 11 04:44:31 2012] ../../acisf13738/products/spectra/fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5.wrmf not found
[Sat Aug 11 04:44:31 2012] Removal of ../../acisf13738/products/spectra/fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5.soff failed
[Sat Aug 11 04:45:54 2012] Keeping rmf generated by specextract
[Sat Aug 11 04:45:54 2012] 183.727
[Sat Aug 11 05:15:33 2012] Updating aperture counts using extracted products
[Sat Aug 11 05:15:33 2012] Error reading totcts from fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5_src.pi.gz
[Sat Aug 11 05:15:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 05:15:33 2012] Using photon index=1.80, rate=0.00188, arf fullrun_ccd1_acisf13738_pi14-548_pass1_cl_src5.arf
[Sat Aug 11 05:15:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Aug 11 05:15:33 2012] Updating source flux to 2.3e-14