[Thu May  9 22:39:08 2013] Detection parameters:
  Position = (463.9, 285.0) = 15 3 32.95 -41 41 55.2
  Extent = 2.2" x 1.1", rotation angle = 79 degrees
  Source counts = 12.0 +/- 7.1
  Background counts = 38.0
  Rate = 0.0001 +/- 8e-05

[Thu May  9 22:39:09 2013] Off-axis axis estimate = 14.94'
[Thu May  9 22:45:17 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Thu May  9 22:45:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 22:45:17 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Thu May  9 22:45:17 2013] source mask rpix=20.5, npix_max = 1766, mask sum = 1364, frac = 0.772
[Thu May  9 22:45:17 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.09"
[Fri May 10 05:56:45 2013] fullrun_ccd5_acisf13737_pi14-548_cl_pass0_src13.ximg exists
[Fri May 10 05:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13737_pi14-548_cl_pass0_src13.csv
[Fri May 10 05:56:45 2013] fullrun_ccd5_acisf13737_pi14-548_cl_pass0_src13_1.ximg exists
[Fri May 10 05:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13737_pi14-548_cl_pass0_src13.csv
[Fri May 10 05:56:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf13737_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf13737_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 05:56:46 2013] fullrun_ccd5_acisf13737_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri May 10 05:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13737_pi14-548_cl_pass0_tfrozen_src13.csv
[Fri May 10 05:56:46 2013] fullrun_ccd5_acisf13737_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 10 05:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13737_pi14-548_cl_pass0_tfrozen_src13.csv
[Fri May 10 05:56:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf13737_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf13737_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 07:39:03 2013] Spatial fit model total counts = 6668.130000, observed total counts = 5667.000000
[Fri May 10 07:39:03 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 07:39:03 2013] Vigneting correction estimate = 1.000000
[Fri May 10 07:39:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 07:39:03 2013] Assessing source extent using major
[Fri May 10 07:39:03 2013] Source does appear to be extended
[Fri May 10 07:39:03 2013] Computing asymmetry using major and minor axis, asym = 1.99
[Fri May 10 07:39:03 2013] Source is asymmetric
[Fri May 10 07:39:03 2013] Deleting source due to low Poisson probability 0.6