[Sat Jul 13 14:29:06 2013] Detection parameters:
  Position = (1063.7, 430.2) = 16 58 51.89 -15 15 7.1
  Extent = 1.0" x 0.6", rotation angle = 170 degrees
  Source counts = 21.3 +/- 4.9
  Background counts = 2.7
  Rate = 0.0005 +/- 0.0001

[Sat Jul 13 14:29:06 2013] Off-axis axis estimate = 2.52'
[Sat Jul 13 15:31:31 2013] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sat Jul 13 15:31:31 2013] Initial guess for spatial extent in simple fitting = 0.50"
[Sat Jul 13 15:31:31 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.990
[Sat Jul 13 15:31:31 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.50"
[Sat Jul 13 15:56:46 2013] fullrun_ccd7_acisf13731_pi14-548_cl_pass0_src10.ximg exists
[Sat Jul 13 15:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13731_pi14-548_cl_pass0_src10.csv
[Sat Jul 13 15:56:46 2013] fullrun_ccd7_acisf13731_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Jul 13 15:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13731_pi14-548_cl_pass0_src10.csv
[Sat Jul 13 15:56:46 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13731_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13731_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 13 15:56:46 2013] fullrun_ccd7_acisf13731_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Jul 13 15:56:46 2013] fullrun_ccd7_acisf13731_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jul 13 15:56:46 2013] Fit fullrun_ccd7_acisf13731_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Jul 13 15:56:53 2013] Source 12 is offset by -0.386559 and -1.165290 pixels which is larger than
2 X fitted extent = 5.414593 x 0.509841, not incorporating fit results
[Sat Jul 13 15:56:53 2013] Vigneting correction estimate = 1.000000
[Sat Jul 13 15:56:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 13 15:56:53 2013] Assessing source extent using major
[Sat Jul 13 15:56:53 2013] Source does appear to be extended
[Sat Jul 13 15:56:53 2013] Computing asymmetry using major and minor axis, asym = 1.51
[Sat Jul 13 15:56:53 2013] Source is asymmetric
[Sat Jul 13 16:53:09 2013] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sat Jul 13 16:53:09 2013] Initial guess for spatial extent in simple fitting = 0.50"
[Sat Jul 13 16:53:09 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.990
[Sat Jul 13 16:53:09 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.50"
[Sat Jul 13 17:13:52 2013] fullrun_ccd7_acisf13731_pi14-548_cl_pass1_src10.ximg exists
[Sat Jul 13 17:13:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13731_pi14-548_cl_pass1_src10.csv
[Sat Jul 13 17:13:52 2013] fullrun_ccd7_acisf13731_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Jul 13 17:13:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13731_pi14-548_cl_pass1_src10.csv
[Sat Jul 13 17:13:52 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13731_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13731_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 13 17:13:53 2013] fullrun_ccd7_acisf13731_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Jul 13 17:13:53 2013] fullrun_ccd7_acisf13731_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jul 13 17:13:53 2013] Fit fullrun_ccd7_acisf13731_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jul 13 17:14:00 2013] Source 12 is offset by -0.386559 and -1.165290 pixels which is larger than
2 X fitted extent = 5.414593 x 0.509841, not incorporating fit results
[Sat Jul 13 17:14:00 2013] Vigneting correction estimate = 1.000000
[Sat Jul 13 17:14:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 13 17:14:00 2013] Assessing source extent using major
[Sat Jul 13 17:14:00 2013] Source does appear to be extended
[Sat Jul 13 17:14:00 2013] Computing asymmetry using major and minor axis, asym = 1.51
[Sat Jul 13 17:14:00 2013] Source is asymmetric
[Sat Jul 13 17:24:02 2013] Writing source region out to fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12_src.reg
[Sat Jul 13 17:24:02 2013] Extracting stamp from image fullrun_ccd7_acisf13731_pi14-548_cl_sm2.00.img.gz, (1019, 386) - (1108, 475)
[Sat Jul 13 17:24:02 2013] Writing fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12.gif
[Sat Jul 13 17:26:40 2013] Size of ../../acisf13731/products/events/fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12_src.evt.gz[events] = 24 counts
[Sat Jul 13 17:26:40 2013] Mean chipx,y = (162.21, 818.71)
[Sat Jul 13 17:26:40 2013] Mean tdetx,y = (4079.21, 2520.71)
[Sat Jul 13 17:26:40 2013] chipx,y range = (146.00-180.00, 799.00-837.00)
[Sat Jul 13 17:26:40 2013] Size of ../../acisf13731/products/events/fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 42 counts
[Sat Jul 13 17:26:41 2013] Not generating rmf since there are only 21 counts
[Sat Jul 13 17:26:41 2013] arf not found, will run specextract
[Sat Jul 13 17:26:49 2013] ../../acisf13731/products/spectra/fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12.warf not found
[Sat Jul 13 17:26:49 2013] ../../acisf13731/products/spectra/fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12.wrmf not found
[Sat Jul 13 17:26:49 2013] Removal of ../../acisf13731/products/spectra/fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12.soff failed
[Sat Jul 13 17:32:26 2013] Spectrum 12 has only 21 counts, deleting rmf
[Sat Jul 13 17:32:26 2013] 227.014
[Sat Jul 13 17:32:32 2013] Updating aperture counts using extracted products
[Sat Jul 13 17:32:32 2013] Total counts from fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12_src.pi.gz = 24.00
[Sat Jul 13 17:32:32 2013] Total counts from fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12_bgd.pi.gz = 42.00
[Sat Jul 13 17:32:32 2013] Got source and background scale factors 0.000002, 0.000035
[Sat Jul 13 17:32:32 2013] User source parameters:
  Position = (1063.7, 430.2) = 16 58 51.89 -15 15 7.1
  Extent = 1.0" x 0.6", rotation angle = 170
  Source aperture counts = 21.6 +/- 6.0
  Background aperture counts = 2.4
  Rate = 0.0005 +/- 0.0002

[Sat Jul 13 17:32:32 2013] Updating counts from extracted products
[Sat Jul 13 17:32:32 2013] Set source signif. to 21.65/1.53 = 14.11
[Sat Jul 13 17:32:35 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jul 13 17:32:35 2013] Using photon index=1.80, rate=0.000549, arf fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12.arf
[Sat Jul 13 17:32:35 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jul 13 17:32:35 2013] Updating source flux to 4.5e-15
[Sat Jul 13 17:32:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jul 13 17:32:52 2013] acisf13731/analysis//spectral/fullrun_ccd7_acisf13731_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete