[Sat Jul 13 14:28:35 2013] Detection parameters: Position = (873.7, 1107.8) = 16 58 46.21 -15 17 34.9 Extent = 0.8" x 0.5", rotation angle = 150 degrees Source counts = 12.0 +/- 3.6 Background counts = 1.0 Rate = 0.0003 +/- 9e-05 [Sat Jul 13 14:28:35 2013] Off-axis axis estimate = 4.32' [Sat Jul 13 15:22:09 2013] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting [Sat Jul 13 15:22:09 2013] Initial guess for spatial extent in simple fitting = 0.93" [Sat Jul 13 15:22:09 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093 [Sat Jul 13 15:22:09 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.93" [Sat Jul 13 15:31:31 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src8.ximg exists [Sat Jul 13 15:31:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src8.csv [Sat Jul 13 15:31:31 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src8_1.ximg exists [Sat Jul 13 15:31:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src8.csv [Sat Jul 13 15:31:31 2013] It looks like the fit did not converge You should probably delete fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 13 15:31:31 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass0_tfrozen_src8.ximg exists [Sat Jul 13 15:31:31 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists [Sat Jul 13 15:31:31 2013] Fit fullrun_ccd6_acisf13731_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly [Sat Jul 13 15:56:50 2013] Spatial fit model total counts = 16.576100, observed total counts = 19.000000 [Sat Jul 13 15:56:50 2013] Offset between fit and detection position for source 6 = 1.540872 pixels Spatial fit parameters: Offset between fit and detection position for source 6 = 1.540872 pixels Position = (872.2, 1108.3) = 16 58 46.27 -15 17 34.9 Extent = 1.6 (1.3-1.9)" x 0.7 (0.4-0.9)", rotation angle = 0 (341-14) degrees Source counts = 17.2 +/- 4.2 Background counts = 0.0 Rate = 0.0004 +/- 0.0001 [Sat Jul 13 15:56:50 2013] Vigneting correction estimate = 1.000000 [Sat Jul 13 15:56:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 13 15:56:50 2013] Assessing source extent using major axis lower bound [Sat Jul 13 15:56:50 2013] Source does appear to be extended [Sat Jul 13 15:56:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.46 [Sat Jul 13 16:43:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jul 13 16:43:22 2013] Initial guess for spatial extent in simple fitting = 1.15" [Sat Jul 13 16:43:22 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.112 [Sat Jul 13 16:43:22 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 1.15" [Sat Jul 13 16:53:09 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src8.ximg exists [Sat Jul 13 16:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src8.csv [Sat Jul 13 16:53:09 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src8_1.ximg exists [Sat Jul 13 16:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src8.csv [Sat Jul 13 16:53:09 2013] It looks like the fit did not converge You should probably delete fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 13 16:53:09 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src8.ximg exists [Sat Jul 13 16:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src8.csv [Sat Jul 13 16:53:09 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists [Sat Jul 13 16:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src8.csv [Sat Jul 13 16:53:09 2013] It looks like the fit did not converge You should probably delete fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jul 13 17:13:57 2013] Spatial fit model total counts = 16.628100, observed total counts = 19.000000 [Sat Jul 13 17:13:57 2013] Offset between fit and detection position for source 6 = 0.379662 pixels [Sat Jul 13 17:13:57 2013] 17.994010 total counts/ 3.482710 bgd. counts: snr = 7.775846 Spatial fit parameters: Offset between fit and detection position for source 6 = 0.379662 pixels Position = (872.1, 1107.9) = 16 58 46.27 -15 17 35.1 Extent = 1.6 (1.2-2.3)" x 0.4 (0.3-0.6)", rotation angle = 0 (352-13) degrees Source counts = 14.5 +/- 4.2 Background counts = 3.5 Rate = 0.0004 +/- 0.0001 [Sat Jul 13 17:13:57 2013] Vigneting correction estimate = 1.000000 [Sat Jul 13 17:13:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jul 13 17:13:57 2013] Assessing source extent using major axis lower bound [Sat Jul 13 17:13:57 2013] Source does appear to be extended [Sat Jul 13 17:13:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.15 [Sat Jul 13 17:13:57 2013] Source is asymmetric [Sat Jul 13 17:18:14 2013] Writing source region out to fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6_src.reg [Sat Jul 13 17:18:14 2013] Extracting stamp from image fullrun_ccd6_acisf13731_pi14-548_cl_sm2.00.img.gz, (798, 1034) - (946, 1182) [Sat Jul 13 17:18:14 2013] Writing fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6.gif [Sat Jul 13 17:22:38 2013] Size of ../../acisf13731/products/events/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6_src.evt.gz[events] = 15 counts [Sat Jul 13 17:22:38 2013] Mean chipx,y = (867.67, 867.53) [Sat Jul 13 17:22:38 2013] Mean tdetx,y = (3742.67, 2569.53) [Sat Jul 13 17:22:38 2013] chipx,y range = (850.00-882.00, 855.00-890.00) [Sat Jul 13 17:22:38 2013] Size of ../../acisf13731/products/events/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 91 counts [Sat Jul 13 17:22:39 2013] Not generating rmf since there are only 14 counts [Sat Jul 13 17:22:39 2013] arf not found, will run specextract [Sat Jul 13 17:23:12 2013] ../../acisf13731/products/spectra/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6.warf not found [Sat Jul 13 17:23:12 2013] ../../acisf13731/products/spectra/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6.wrmf not found [Sat Jul 13 17:23:12 2013] Removal of ../../acisf13731/products/spectra/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6.soff failed [Sat Jul 13 17:24:01 2013] Spectrum 6 has only 15 counts, deleting rmf [Sat Jul 13 17:24:01 2013] 195.83 [Sat Jul 13 17:32:31 2013] Updating aperture counts using extracted products [Sat Jul 13 17:32:31 2013] Total counts from fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6_src.pi.gz = 15.00 [Sat Jul 13 17:32:31 2013] Total counts from fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6_bgd.pi.gz = 91.00 [Sat Jul 13 17:32:31 2013] Got source and background scale factors 0.000002, 0.000096 [Sat Jul 13 17:32:31 2013] User source parameters: Position = (872.1, 1107.9) = 16 58 46.27 -15 17 35.1 Extent = 1.6 (1.2-2.3)" x 0.4 (0.3-0.6)", rotation angle = 0 (352-13) degrees Source aperture counts = 13.3 +/- 5.0 Background aperture counts = 1.7 Rate = 0.0003 +/- 0.0001 [Sat Jul 13 17:32:31 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jul 13 17:32:31 2013] Using photon index=1.80, rate=0.000368, arf fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6.arf [Sat Jul 13 17:32:31 2013] Assuming count rate is from the 0.20-8.00 bandpass [Sat Jul 13 17:32:31 2013] Updating source flux to 4.1e-15 [Sat Jul 13 17:32:50 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting [Sat Jul 13 17:32:51 2013] acisf13731/analysis//spectral/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete