[Sat Jul 13 14:28:35 2013] Detection parameters:
  Position = (93.5, 837.5) = 16 59 12.74 -15 19 47.9
  Extent = 1.5" x 0.5", rotation angle = 119 degrees
  Source counts = 26.3 +/- 5.3
  Background counts = 1.7
  Rate = 0.0007 +/- 0.0001

[Sat Jul 13 14:28:35 2013] Off-axis axis estimate = 4.90'
[Sat Jul 13 15:22:09 2013] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Sat Jul 13 15:22:09 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 13 15:22:09 2013] Initial guess for spatial extent in simple fitting = 1.14"
[Sat Jul 13 15:22:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.785
[Sat Jul 13 15:22:09 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 1.14"
[Sat Jul 13 15:31:31 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src2.ximg exists
[Sat Jul 13 15:31:31 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Jul 13 15:31:31 2013] Fit fullrun_ccd6_acisf13731_pi14-548_cl_pass0_src2 appears to have run properly
[Sat Jul 13 15:31:31 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Jul 13 15:31:31 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jul 13 15:31:31 2013] Fit fullrun_ccd6_acisf13731_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jul 13 15:56:50 2013] Spatial fit model total counts = 27.871500, observed total counts = 28.000000
[Sat Jul 13 15:56:50 2013] Offset between fit and detection position for source 1 = 1.161333 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.161333 pixels
  Position = (93.6, 838.6) = 16 59 12.75 -15 19 47.6
  Extent = 2.3 (1.7-4.6)" x 0.8 (0.6-1.0)", rotation angle = 61 (52-74) degrees
  Source counts = 27.9 +/- 5.3
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sat Jul 13 15:56:50 2013] Vigneting correction estimate = 1.000000
[Sat Jul 13 15:56:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 13 15:56:50 2013] Assessing source extent using major axis lower bound
[Sat Jul 13 15:56:50 2013] Source does appear to be extended
[Sat Jul 13 15:56:50 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.75
[Sat Jul 13 15:56:50 2013] Source is asymmetric
[Sat Jul 13 16:43:22 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 13 16:43:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 13 16:43:22 2013] Initial guess for spatial extent in simple fitting = 1.52"
[Sat Jul 13 16:43:22 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.952
[Sat Jul 13 16:43:22 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 1.52"
[Sat Jul 13 16:53:09 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src2.ximg exists
[Sat Jul 13 16:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src2.csv
[Sat Jul 13 16:53:09 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Jul 13 16:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src2.csv
[Sat Jul 13 16:53:09 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13731_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 13 16:53:09 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Jul 13 16:53:09 2013] fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jul 13 16:53:09 2013] Fit fullrun_ccd6_acisf13731_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jul 13 17:13:57 2013] Spatial fit model total counts = 26.280600, observed total counts = 30.000000
[Sat Jul 13 17:13:57 2013] Offset between fit and detection position for source 1 = 0.341931 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.341931 pixels
  Position = (93.7, 838.3) = 16 59 12.75 -15 19 47.7
  Extent = 2.2 (1.6-3.0)" x 0.8 (0.6-1.0)", rotation angle = 64 (52-75) degrees
  Source counts = 26.6 +/- 5.2
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sat Jul 13 17:13:57 2013] Vigneting correction estimate = 1.000000
[Sat Jul 13 17:13:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 13 17:13:57 2013] Assessing source extent using major axis lower bound
[Sat Jul 13 17:13:57 2013] Source does appear to be extended
[Sat Jul 13 17:13:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59
[Sat Jul 13 17:13:57 2013] Source is asymmetric
[Sat Jul 13 17:18:14 2013] Writing source region out to fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1_src.reg
[Sat Jul 13 17:18:14 2013] Extracting stamp from image fullrun_ccd6_acisf13731_pi14-548_cl_sm2.00.img.gz, (0, 737) - (195, 940)
[Sat Jul 13 17:18:14 2013] Writing fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1.gif
[Sat Jul 13 17:18:54 2013] Size of ../../acisf13731/products/events/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1_src.evt.gz[events] = 27 counts
[Sat Jul 13 17:18:54 2013] Mean chipx,y = (877.48, 42.89)
[Sat Jul 13 17:18:54 2013] Mean tdetx,y = (3752.48, 1744.89)
[Sat Jul 13 17:18:54 2013] chipx,y range = (858.00-899.00, 29.00-60.00)
[Sat Jul 13 17:18:54 2013] Size of ../../acisf13731/products/events/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 115 counts
[Sat Jul 13 17:18:55 2013] Not generating rmf since there are only 26 counts
[Sat Jul 13 17:18:55 2013] arf not found, will run specextract
[Sat Jul 13 17:19:04 2013] ../../acisf13731/products/spectra/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1.warf not found
[Sat Jul 13 17:19:04 2013] ../../acisf13731/products/spectra/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1.wrmf not found
[Sat Jul 13 17:19:04 2013] Removal of ../../acisf13731/products/spectra/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1.soff failed
[Sat Jul 13 17:24:01 2013] Spectrum 1 has only 27 counts, deleting rmf
[Sat Jul 13 17:24:01 2013] 190.106
[Sat Jul 13 17:32:30 2013] Updating aperture counts using extracted products
[Sat Jul 13 17:32:30 2013] Total counts from fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1_src.pi.gz = 27.00
[Sat Jul 13 17:32:30 2013] Total counts from fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1_bgd.pi.gz = 115.00
[Sat Jul 13 17:32:30 2013] Got source and background scale factors 0.000005, 0.000181
[Sat Jul 13 17:32:30 2013] User source parameters:
  Position = (93.7, 838.3) = 16 59 12.75 -15 19 47.7
  Extent = 2.2 (1.6-3.0)" x 0.8 (0.6-1.0)", rotation angle = 64 (52-75) degrees
  Source aperture counts = 23.6 +/- 6.3
  Background aperture counts = 3.4
  Rate = 0.0006 +/- 0.0002

[Sat Jul 13 17:32:31 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jul 13 17:32:31 2013] Using photon index=1.80, rate=0.000676, arf fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1.arf
[Sat Jul 13 17:32:31 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jul 13 17:32:31 2013] Updating source flux to 8.1e-15
[Sat Jul 13 17:32:50 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jul 13 17:32:51 2013] acisf13731/analysis//spectral/fullrun_ccd6_acisf13731_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete