[Sat Jun 15 18:58:54 2013] Detection parameters:
  Position = (32.9, 942.5) = 17 48 22.78 -24 46 0.1
  Extent = 0.9" x 0.5", rotation angle = 174 degrees
  Source counts = 22.3 +/- 5.0
  Background counts = 2.7
  Rate = 0.0005 +/- 0.0001

[Sat Jun 15 18:58:54 2013] Off-axis axis estimate = 4.20'
[Sat Jun 15 18:59:57 2013] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 18:59:57 2013] Initial guess for spatial extent in simple fitting = 0.89"
[Sat Jun 15 18:59:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.936
[Sat Jun 15 18:59:57 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 0.89"
[Sat Jun 15 21:35:48 2013] fullrun_ccd7_acisf13706_pi14-548_cl_pass0_src61.ximg exists
[Sat Jun 15 21:35:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13706_pi14-548_cl_pass0_src61.csv
[Sat Jun 15 21:35:48 2013] fullrun_ccd7_acisf13706_pi14-548_cl_pass0_src61_1.ximg exists
[Sat Jun 15 21:35:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13706_pi14-548_cl_pass0_src61.csv
[Sat Jun 15 21:35:48 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13706_pi14-548_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13706_pi14-548_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 21:35:49 2013] fullrun_ccd7_acisf13706_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Sat Jun 15 21:35:49 2013] fullrun_ccd7_acisf13706_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Sat Jun 15 21:35:49 2013] Fit fullrun_ccd7_acisf13706_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Sat Jun 15 21:36:04 2013] Spatial fit model total counts = 27.375900, observed total counts = 32.000000
[Sat Jun 15 21:36:04 2013] Offset between fit and detection position for source 68 = 0.756923 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.756923 pixels
  Position = (33.4, 943.1) = 17 48 22.78 -24 46 0.0
  Extent = 1.2 (0.9-1.7)" x 0.5 (0.4-0.7)", rotation angle = 5 (352-22) degrees
  Source counts = 25.5 +/- 5.1
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Sat Jun 15 21:36:04 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 21:36:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 21:36:04 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 21:36:04 2013] Source does appear to be extended
[Sat Jun 15 21:36:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Sat Jun 15 21:36:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 21:36:15 2013] Initial guess for spatial extent in simple fitting = 0.87"
[Sat Jun 15 21:36:15 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.980
[Sat Jun 15 21:36:15 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 0.87"
[Sat Jun 15 23:29:18 2013] fullrun_ccd7_acisf13706_pi14-548_cl_pass1_src54.ximg exists
[Sat Jun 15 23:29:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13706_pi14-548_cl_pass1_src54.csv
[Sat Jun 15 23:29:18 2013] fullrun_ccd7_acisf13706_pi14-548_cl_pass1_src54_1.ximg exists
[Sat Jun 15 23:29:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13706_pi14-548_cl_pass1_src54.csv
[Sat Jun 15 23:29:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13706_pi14-548_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13706_pi14-548_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 23:29:19 2013] fullrun_ccd7_acisf13706_pi14-548_cl_pass1_tfrozen_src54.ximg exists
[Sat Jun 15 23:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13706_pi14-548_cl_pass1_tfrozen_src54.csv
[Sat Jun 15 23:29:19 2013] fullrun_ccd7_acisf13706_pi14-548_cl_pass1_tfrozen_src54_1.ximg exists
[Sat Jun 15 23:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13706_pi14-548_cl_pass1_tfrozen_src54.csv
[Sat Jun 15 23:29:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13706_pi14-548_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13706_pi14-548_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 23:29:31 2013] Spatial fit model total counts = 29.042900, observed total counts = 33.000000
[Sat Jun 15 23:29:31 2013] Offset between fit and detection position for source 68 = 0.701924 pixels
[Sat Jun 15 23:29:31 2013] 26.645510 total counts/ 5.880210 bgd. counts: snr = 8.563312
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.701924 pixels
  Position = (34.1, 943.0) = 17 48 22.75 -24 46 0.1
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 20.8 +/- 5.2
  Background counts = 5.9
  Rate = 0.0004 +/- 0.0001
[Sat Jun 15 23:29:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 23:29:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 23:29:31 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 23:29:31 2013] Source does appear to be extended
[Sat Jun 15 23:29:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 23:29:41 2013] Writing source region out to fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68_src.reg
[Sat Jun 15 23:29:41 2013] Extracting stamp from image fullrun_ccd7_acisf13706_pi14-548_cl_sm2.00.img.gz, (0, 908) - (70, 978)
[Sat Jun 15 23:29:41 2013] Writing fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68.gif
[Sat Jun 15 23:43:04 2013] Size of ../../acisf13706/products/events/fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68_src.evt.gz[events] = 26 counts
[Sat Jun 15 23:43:04 2013] Mean chipx,y = (93.08, 1004.08)
[Sat Jun 15 23:43:04 2013] Mean tdetx,y = (4010.08, 2706.08)
[Sat Jun 15 23:43:04 2013] chipx,y range = (73.00-108.00, 990.00-1023.00)
[Sat Jun 15 23:43:04 2013] Size of ../../acisf13706/products/events/fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68_bgd.evt.gz[events] = 30 counts
[Sat Jun 15 23:43:05 2013] Not generating rmf since there are only 20 counts
[Sat Jun 15 23:43:05 2013] arf not found, will run specextract
[Sat Jun 15 23:43:13 2013] ../../acisf13706/products/spectra/fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68.warf not found
[Sat Jun 15 23:43:13 2013] ../../acisf13706/products/spectra/fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68.wrmf not found
[Sat Jun 15 23:43:13 2013] Removal of ../../acisf13706/products/spectra/fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68.soff failed
[Sat Jun 15 23:47:57 2013] Spectrum 68 has only 21 counts, deleting rmf
[Sat Jun 15 23:47:57 2013] 184.034
[Sat Jun 15 23:48:05 2013] Updating aperture counts using extracted products
[Sat Jun 15 23:48:05 2013] Total counts from fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68_src.pi.gz = 26.00
[Sat Jun 15 23:48:05 2013] Total counts from fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68_bgd.pi.gz = 30.00
[Sat Jun 15 23:48:06 2013] Got source and background scale factors 0.000002, 0.000022
[Sat Jun 15 23:48:06 2013] User source parameters:
  Position = (34.1, 943.0) = 17 48 22.75 -24 46 0.1
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source aperture counts = 23.5 +/- 6.2
  Background aperture counts = 2.5
  Rate = 0.0005 +/- 0.0001

[Sat Jun 15 23:48:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 23:48:08 2013] Using photon index=1.80, rate=0.000447, arf fullrun_ccd7_acisf13706_pi14-548_pass1_cl_src68.arf
[Sat Jun 15 23:48:08 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 15 23:48:08 2013] Updating source flux to 5.9e-15
[Sat Jun 15 23:48:10 2013] Source 68 has fewer than 100.000000 counts, skipping spectral fitting