[Fri May 24 14:20:17 2013] Detection parameters:
  Position = (191.1, 837.7) = 19 24 51.43 50 13 30.6
  Extent = 0.6" x 0.5", rotation angle = 25 degrees
  Source counts = 10.7 +/- 3.5
  Background counts = 1.3
  Rate = 0.0004 +/- 0.0001

[Fri May 24 14:20:18 2013] Off-axis axis estimate = 3.25'
[Fri May 24 16:00:25 2013] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:00:25 2013] Initial guess for spatial extent in simple fitting = 0.63"
[Fri May 24 16:00:25 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.941
[Fri May 24 16:00:25 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 0.63"
[Fri May 24 16:51:58 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src38.ximg exists
[Fri May 24 16:51:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src38.csv
[Fri May 24 16:51:58 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src38_1.ximg exists
[Fri May 24 16:51:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src38.csv
[Fri May 24 16:51:58 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:51:58 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src38.ximg exists
[Fri May 24 16:51:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src38.csv
[Fri May 24 16:51:58 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src38_1.ximg exists
[Fri May 24 16:51:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src38.csv
[Fri May 24 16:51:58 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:52:09 2013] Spatial fit model total counts = 18.815500, observed total counts = 25.000000
[Fri May 24 16:52:09 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 16:52:09 2013] Vigneting correction estimate = 1.000000
[Fri May 24 16:52:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 16:52:09 2013] Assessing source extent using major
[Fri May 24 16:52:09 2013] Source does appear to be extended
[Fri May 24 16:52:09 2013] Computing asymmetry using major and minor axis, asym = 1.20
[Fri May 24 18:19:33 2013] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Fri May 24 18:19:33 2013] Initial guess for spatial extent in simple fitting = 0.63"
[Fri May 24 18:19:33 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.941
[Fri May 24 18:19:33 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 0.63"
[Fri May 24 19:08:25 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src38.ximg exists
[Fri May 24 19:08:25 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src38_1.ximg exists
[Fri May 24 19:08:25 2013] Fit fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src38 appears to have run properly
[Fri May 24 19:08:26 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src38.ximg exists
[Fri May 24 19:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src38.csv
[Fri May 24 19:08:26 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src38_1.ximg exists
[Fri May 24 19:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src38.csv
[Fri May 24 19:08:26 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 19:08:36 2013] Spatial fit model total counts = 24.681700, observed total counts = 25.000000
[Fri May 24 19:08:36 2013] Offset between fit and detection position for source 31 = 1.744281 pixels
[Fri May 24 19:08:36 2013] 23.244730 total counts/ 4.007030 bgd. counts: snr = 9.610409
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.744281 pixels
  Position = (189.4, 837.2) = 19 24 51.54 50 13 30.1
  Extent = 1.5 (1.3-3.0)" x 0.5 (0.2-0.7)", rotation angle = 338 (327-346) degrees
  Source counts = 19.2 +/- 4.8
  Background counts = 4.0
  Rate = 0.0006 +/- 0.0002
[Fri May 24 19:08:36 2013] Vigneting correction estimate = 1.000000
[Fri May 24 19:08:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 19:08:36 2013] Assessing source extent using major axis lower bound
[Fri May 24 19:08:36 2013] Source does appear to be extended
[Fri May 24 19:08:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.82
[Fri May 24 19:08:36 2013] Source is asymmetric
[Fri May 24 19:21:55 2013] Writing source region out to fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31_src.reg
[Fri May 24 19:21:55 2013] Extracting stamp from image fullrun_ccd7_acisf13676_pi14-548_cl_sm2.00.img.gz, (121, 769) - (258, 906)
[Fri May 24 19:21:55 2013] Writing fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31.gif
[Fri May 24 19:32:11 2013] Size of ../../acisf13676/products/events/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31_src.evt.gz[events] = 19 counts
[Fri May 24 19:32:11 2013] Mean chipx,y = (197.63, 895.58)
[Fri May 24 19:32:11 2013] Mean tdetx,y = (4114.63, 2597.58)
[Fri May 24 19:32:11 2013] chipx,y range = (183.00-214.00, 879.00-913.00)
[Fri May 24 19:32:11 2013] Size of ../../acisf13676/products/events/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 132 counts
[Fri May 24 19:32:13 2013] Not generating rmf since there are only 19 counts
[Fri May 24 19:32:13 2013] arf not found, will run specextract
[Fri May 24 19:32:20 2013] ../../acisf13676/products/spectra/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31.warf not found
[Fri May 24 19:32:20 2013] ../../acisf13676/products/spectra/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31.wrmf not found
[Fri May 24 19:32:20 2013] Removal of ../../acisf13676/products/spectra/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31.soff failed
[Fri May 24 19:32:46 2013] Spectrum 31 has only 19 counts, deleting rmf
[Fri May 24 19:32:46 2013] 223.689
[Fri May 24 19:32:58 2013] Updating aperture counts using extracted products
[Fri May 24 19:32:58 2013] Total counts from fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31_src.pi.gz = 19.00
[Fri May 24 19:32:58 2013] Total counts from fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31_bgd.pi.gz = 132.00
[Fri May 24 19:32:58 2013] Got source and background scale factors 0.000002, 0.000075
[Fri May 24 19:32:58 2013] User source parameters:
  Position = (189.4, 837.2) = 19 24 51.54 50 13 30.1
  Extent = 1.5 (1.3-3.0)" x 0.5 (0.2-0.7)", rotation angle = 338 (327-346) degrees
  Source aperture counts = 15.1 +/- 5.4
  Background aperture counts = 3.9
  Rate = 0.0005 +/- 0.0002

[Fri May 24 19:32:58 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 19:32:58 2013] Using photon index=1.80, rate=0.000648, arf fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src31.arf
[Fri May 24 19:32:58 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 24 19:32:58 2013] Updating source flux to 5.3e-15
[Fri May 24 19:33:08 2013] Flag p found in src. 31 procflags, skipping spectral fitting
[Fri May 24 19:33:08 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting