[Fri May 24 14:20:17 2013] Detection parameters:
  Position = (102.3, 808.1) = 19 24 55.98 50 13 16.0
  Extent = 1.0" x 0.5", rotation angle = 17 degrees
  Source counts = 15.3 +/- 4.1
  Background counts = 1.7
  Rate = 0.0005 +/- 0.0001

[Fri May 24 14:20:18 2013] Off-axis axis estimate = 4.02'
[Fri May 24 16:00:25 2013] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Fri May 24 16:00:25 2013] Initial guess for spatial extent in simple fitting = 0.83"
[Fri May 24 16:00:25 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Fri May 24 16:00:25 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 0.83"
[Fri May 24 16:51:58 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src23.ximg exists
[Fri May 24 16:51:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src23.csv
[Fri May 24 16:51:58 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src23_1.ximg exists
[Fri May 24 16:51:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src23.csv
[Fri May 24 16:51:58 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13676_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 16:51:58 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri May 24 16:51:58 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri May 24 16:51:58 2013] Fit fullrun_ccd7_acisf13676_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri May 24 16:52:09 2013] Spatial fit model total counts = 23.523100, observed total counts = 27.000000
[Fri May 24 16:52:09 2013] Offset between fit and detection position for source 26 = 3.095030 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.095030 pixels
  Position = (99.2, 807.5) = 19 24 56.16 50 13 15.4
  Extent = 1.7 (1.5-3.3)" x 0.3 (0.2-0.4)", rotation angle = 340 (336-343) degrees
  Source counts = 24.9 +/- 5.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri May 24 16:52:09 2013] Vigneting correction estimate = 1.000000
[Fri May 24 16:52:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 16:52:09 2013] Assessing source extent using major axis lower bound
[Fri May 24 16:52:09 2013] Source does appear to be extended
[Fri May 24 16:52:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.89
[Fri May 24 16:52:09 2013] Source is asymmetric
[Fri May 24 16:52:09 2013] Source is confused with source 25
[Fri May 24 18:19:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 18:19:33 2013] Initial guess for spatial extent in simple fitting = 0.99"
[Fri May 24 18:19:33 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Fri May 24 18:19:33 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 0.99"
[Fri May 24 19:08:25 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src23.ximg exists
[Fri May 24 19:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src23.csv
[Fri May 24 19:08:25 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src23_1.ximg exists
[Fri May 24 19:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src23.csv
[Fri May 24 19:08:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13676_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 19:08:26 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Fri May 24 19:08:26 2013] fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 24 19:08:26 2013] Fit fullrun_ccd7_acisf13676_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Fri May 24 19:08:36 2013] Spatial fit model total counts = 30.952800, observed total counts = 33.000000
[Fri May 24 19:08:36 2013] Offset between fit and detection position for source 26 = 4.499126 pixels
[Fri May 24 19:08:36 2013] 25.357460 total counts/ 5.511460 bgd. counts: snr = 8.453560
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 4.499126 pixels
  Position = (103.4, 809.2) = 19 24 55.95 50 13 16.2
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 19.8 +/- 5.0
  Background counts = 5.5
  Rate = 0.0007 +/- 0.0002
[Fri May 24 19:08:36 2013] Vigneting correction estimate = 1.000000
[Fri May 24 19:08:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 19:08:36 2013] Assessing source extent using major axis lower bound
[Fri May 24 19:08:36 2013] Source does appear to be extended
[Fri May 24 19:08:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 19:21:54 2013] Writing source region out to fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26_src.reg
[Fri May 24 19:21:54 2013] Extracting stamp from image fullrun_ccd7_acisf13676_pi14-548_cl_sm2.00.img.gz, (55, 761) - (152, 858)
[Fri May 24 19:21:54 2013] Writing fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26.gif
[Fri May 24 19:28:01 2013] Size of ../../acisf13676/products/events/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26_src.evt.gz[events] = 25 counts
[Fri May 24 19:28:01 2013] Mean chipx,y = (194.12, 986.08)
[Fri May 24 19:28:01 2013] Mean tdetx,y = (4111.12, 2688.08)
[Fri May 24 19:28:01 2013] chipx,y range = (181.00-211.00, 966.00-1003.00)
[Fri May 24 19:28:01 2013] Size of ../../acisf13676/products/events/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 84 counts
[Fri May 24 19:28:03 2013] Not generating rmf since there are only 19 counts
[Fri May 24 19:28:03 2013] arf not found, will run specextract
[Fri May 24 19:28:10 2013] ../../acisf13676/products/spectra/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26.warf not found
[Fri May 24 19:28:10 2013] ../../acisf13676/products/spectra/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26.wrmf not found
[Fri May 24 19:28:10 2013] Removal of ../../acisf13676/products/spectra/fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26.soff failed
[Fri May 24 19:32:46 2013] Spectrum 26 has only 20 counts, deleting rmf
[Fri May 24 19:32:46 2013] 214.905
[Fri May 24 19:32:56 2013] Updating aperture counts using extracted products
[Fri May 24 19:32:56 2013] Total counts from fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26_src.pi.gz = 25.00
[Fri May 24 19:32:56 2013] Total counts from fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26_bgd.pi.gz = 84.00
[Fri May 24 19:32:56 2013] Got source and background scale factors 0.000003, 0.000039
[Fri May 24 19:32:56 2013] User source parameters:
  Position = (103.4, 809.2) = 19 24 55.95 50 13 16.2
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source aperture counts = 17.6 +/- 6.1
  Background aperture counts = 7.4
  Rate = 0.0006 +/- 0.0002

[Fri May 24 19:32:58 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 19:32:58 2013] Using photon index=1.80, rate=0.000669, arf fullrun_ccd7_acisf13676_pi14-548_pass1_cl_src26.arf
[Fri May 24 19:32:58 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 24 19:32:58 2013] Updating source flux to 6.1e-15
[Fri May 24 19:33:08 2013] Flag c found in src. 26 procflags, skipping spectral fitting
[Fri May 24 19:33:08 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting