[Sat Jun 29 06:10:32 2013] Detection parameters:
  Position = (673.9, 1061.6) = 17 25 18.32 -48 21 12.1
  Extent = 0.9" x 0.5", rotation angle = 27 degrees
  Source counts = 17.9 +/- 4.4
  Background counts = 1.1
  Rate = 0.0009 +/- 0.0002

[Sat Jun 29 06:10:33 2013] Off-axis axis estimate = 5.13'
[Sat Jun 29 07:07:27 2013] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 07:07:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 29 07:07:27 2013] Initial guess for spatial extent in simple fitting = 1.23"
[Sat Jun 29 07:07:27 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Sat Jun 29 07:07:27 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 1.23"
[Sat Jun 29 07:18:25 2013] fullrun_ccd7_acisf13674_pi14-548_cl_pass0_src6.ximg exists
[Sat Jun 29 07:18:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13674_pi14-548_cl_pass0_src6.csv
[Sat Jun 29 07:18:25 2013] fullrun_ccd7_acisf13674_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Jun 29 07:18:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13674_pi14-548_cl_pass0_src6.csv
[Sat Jun 29 07:18:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13674_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13674_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 07:18:25 2013] fullrun_ccd7_acisf13674_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 29 07:18:25 2013] fullrun_ccd7_acisf13674_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 29 07:18:25 2013] Fit fullrun_ccd7_acisf13674_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Jun 29 07:18:31 2013] Spatial fit model total counts = 21.072600, observed total counts = 24.000000
[Sat Jun 29 07:18:31 2013] Offset between fit and detection position for source 7 = 0.989120 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.989120 pixels
  Position = (673.1, 1062.1) = 17 25 18.38 -48 21 12.0
  Extent = 1.3 (1.0-2.0)" x 0.7 (0.5-0.9)", rotation angle = 359 (345-19) degrees
  Source counts = 21.6 +/- 4.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Jun 29 07:18:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 07:18:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 07:18:31 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 07:18:31 2013] Source does appear to be extended
[Sat Jun 29 07:18:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.07
[Sat Jun 29 08:15:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 08:15:00 2013] Initial guess for spatial extent in simple fitting = 1.00"
[Sat Jun 29 08:15:00 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Sat Jun 29 08:15:00 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 1.00"
[Sat Jun 29 08:26:56 2013] fullrun_ccd7_acisf13674_pi14-548_cl_pass1_src6.ximg exists
[Sat Jun 29 08:26:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13674_pi14-548_cl_pass1_src6.csv
[Sat Jun 29 08:26:56 2013] fullrun_ccd7_acisf13674_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Jun 29 08:26:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13674_pi14-548_cl_pass1_src6.csv
[Sat Jun 29 08:26:56 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13674_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13674_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 08:26:56 2013] fullrun_ccd7_acisf13674_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 29 08:26:56 2013] fullrun_ccd7_acisf13674_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 29 08:26:56 2013] Fit fullrun_ccd7_acisf13674_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Jun 29 08:27:01 2013] Spatial fit model total counts = 21.695200, observed total counts = 24.000000
[Sat Jun 29 08:27:01 2013] Offset between fit and detection position for source 7 = 0.044599 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.044599 pixels
  Position = (673.1, 1062.2) = 17 25 18.38 -48 21 12.0
  Extent = 1.4 (1.0-2.0)" x 0.7 (0.5-1.0)", rotation angle = 355 (343-18) degrees
  Source counts = 22.2 +/- 4.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Sat Jun 29 08:27:01 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 08:27:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 08:27:01 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 08:27:01 2013] Source does appear to be extended
[Sat Jun 29 08:27:01 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Sat Jun 29 08:39:27 2013] Writing source region out to fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7_src.reg
[Sat Jun 29 08:39:27 2013] Extracting stamp from image fullrun_ccd7_acisf13674_pi14-548_cl_sm2.00.img.gz, (610, 999) - (736, 1125)
[Sat Jun 29 08:39:27 2013] Writing fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7.gif
[Sat Jun 29 08:40:54 2013] Size of ../../acisf13674/products/events/fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7_src.evt.gz[events] = 23 counts
[Sat Jun 29 08:40:54 2013] Mean chipx,y = (679.70, 101.74)
[Sat Jun 29 08:40:54 2013] Mean tdetx,y = (4596.70, 1803.74)
[Sat Jun 29 08:40:54 2013] chipx,y range = (662.00-696.00, 86.00-119.00)
[Sat Jun 29 08:40:54 2013] Size of ../../acisf13674/products/events/fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 47 counts
[Sat Jun 29 08:40:55 2013] Not generating rmf since there are only 22 counts
[Sat Jun 29 08:40:55 2013] arf not found, will run specextract
[Sat Jun 29 08:41:03 2013] ../../acisf13674/products/spectra/fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7.warf not found
[Sat Jun 29 08:41:03 2013] ../../acisf13674/products/spectra/fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7.wrmf not found
[Sat Jun 29 08:41:03 2013] Removal of ../../acisf13674/products/spectra/fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7.soff failed
[Sat Jun 29 08:45:58 2013] Spectrum 7 has only 22 counts, deleting rmf
[Sat Jun 29 08:45:58 2013] 214.068
[Sat Jun 29 08:46:04 2013] Updating aperture counts using extracted products
[Sat Jun 29 08:46:04 2013] Total counts from fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7_src.pi.gz = 23.00
[Sat Jun 29 08:46:04 2013] Total counts from fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7_bgd.pi.gz = 47.00
[Sat Jun 29 08:46:04 2013] Got source and background scale factors 0.000003, 0.000069
[Sat Jun 29 08:46:04 2013] User source parameters:
  Position = (673.1, 1062.2) = 17 25 18.38 -48 21 12.0
  Extent = 1.4 (1.0-2.0)" x 0.7 (0.5-1.0)", rotation angle = 355 (343-18) degrees
  Source aperture counts = 21.1 +/- 5.9
  Background aperture counts = 1.9
  Rate = 0.001 +/- 0.0003

[Sat Jun 29 08:46:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 08:46:06 2013] Using photon index=1.80, rate=0.00112, arf fullrun_ccd7_acisf13674_pi14-548_pass1_cl_src7.arf
[Sat Jun 29 08:46:06 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 29 08:46:06 2013] Updating source flux to 1e-14
[Sat Jun 29 08:46:12 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting