[Sun May  5 05:56:23 2013] Detection parameters:
  Position = (749.5, 188.2) = 15 13 20.95 -25 24 18.2
  Extent = 1.6" x 0.9", rotation angle = 54 degrees
  Source counts = 18.0 +/- 4.4
  Background counts = 1.0
  Rate = 0.004 +/- 0.0009

[Sun May  5 05:56:23 2013] Off-axis axis estimate = 6.09'
[Sun May  5 05:59:38 2013] Using EEF radius (= 1.68 ")to estimate initial spatial extent for simple fitting
[Sun May  5 05:59:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 05:59:38 2013] Initial guess for spatial extent in simple fitting = 1.68"
[Sun May  5 05:59:38 2013] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.916
[Sun May  5 05:59:38 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 1.68"
[Sun May  5 06:03:53 2013] fullrun_ccd7_acisf13666_pi14-548_cl_pass0_src3.ximg exists
[Sun May  5 06:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13666_pi14-548_cl_pass0_src3.csv
[Sun May  5 06:03:53 2013] fullrun_ccd7_acisf13666_pi14-548_cl_pass0_src3_1.ximg exists
[Sun May  5 06:03:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13666_pi14-548_cl_pass0_src3.csv
[Sun May  5 06:03:53 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13666_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13666_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 06:03:53 2013] fullrun_ccd7_acisf13666_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun May  5 06:03:53 2013] fullrun_ccd7_acisf13666_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May  5 06:03:53 2013] Fit fullrun_ccd7_acisf13666_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May  5 06:03:55 2013] Spatial fit model total counts = 17.582200, observed total counts = 19.000000
[Sun May  5 06:03:55 2013] Offset between fit and detection position for source 3 = 0.596296 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.596296 pixels
  Position = (749.0, 187.8) = 15 13 20.98 -25 24 18.6
  Extent = 2.2 (1.5-3.4)" x 1.1 (0.7-1.6)", rotation angle = 113 (90-90) degrees
  Source counts = 18.4 +/- 4.3
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Sun May  5 06:03:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 06:03:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 06:03:55 2013] Assessing source extent using major axis lower bound
[Sun May  5 06:03:55 2013] Source does appear to be extended
[Sun May  5 06:03:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Sun May  5 06:07:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 06:07:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 06:07:23 2013] Initial guess for spatial extent in simple fitting = 1.67"
[Sun May  5 06:07:23 2013] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.059
[Sun May  5 06:07:23 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 1.67"
[Sun May  5 06:10:31 2013] fullrun_ccd7_acisf13666_pi14-548_cl_pass1_src3.ximg exists
[Sun May  5 06:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13666_pi14-548_cl_pass1_src3.csv
[Sun May  5 06:10:31 2013] fullrun_ccd7_acisf13666_pi14-548_cl_pass1_src3_1.ximg exists
[Sun May  5 06:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13666_pi14-548_cl_pass1_src3.csv
[Sun May  5 06:10:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13666_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13666_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 06:10:31 2013] fullrun_ccd7_acisf13666_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun May  5 06:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13666_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun May  5 06:10:31 2013] fullrun_ccd7_acisf13666_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May  5 06:10:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13666_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun May  5 06:10:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13666_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13666_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 06:10:33 2013] Warning, spatial fit 3 centroid is now closest to src. 4
[Sun May  5 06:10:33 2013] Vigneting correction estimate = 1.000000
[Sun May  5 06:10:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 06:10:33 2013] Assessing source extent using major axis lower bound
[Sun May  5 06:10:33 2013] Source does appear to be extended
[Sun May  5 06:10:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Sun May  5 06:12:43 2013] Writing source region out to fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3_src.reg
[Sun May  5 06:12:43 2013] Extracting stamp from image fullrun_ccd7_acisf13666_pi14-548_cl_sm2.00.img.gz, (649, 87) - (849, 288)
[Sun May  5 06:12:43 2013] Writing fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3.gif
[Sun May  5 06:13:19 2013] Size of ../../acisf13666/products/events/fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3_src.evt.gz[events] = 20 counts
[Sun May  5 06:13:19 2013] Mean chipx,y = (923.85, 437.55)
[Sun May  5 06:13:19 2013] Mean tdetx,y = (4840.85, 2139.55)
[Sun May  5 06:13:19 2013] chipx,y range = (906.00-948.00, 414.00-455.00)
[Sun May  5 06:13:19 2013] Size of ../../acisf13666/products/events/fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 30 counts
[Sun May  5 06:13:20 2013] Not generating rmf since there are only 18 counts
[Sun May  5 06:13:20 2013] arf not found, will run specextract
[Sun May  5 06:13:27 2013] ../../acisf13666/products/spectra/fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3.warf not found
[Sun May  5 06:13:27 2013] ../../acisf13666/products/spectra/fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3.wrmf not found
[Sun May  5 06:13:27 2013] Removal of ../../acisf13666/products/spectra/fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3.soff failed
[Sun May  5 06:14:11 2013] Spectrum 3 has only 18 counts, deleting rmf
[Sun May  5 06:14:11 2013] 211.035
[Sun May  5 06:14:14 2013] Updating aperture counts using extracted products
[Sun May  5 06:14:14 2013] Total counts from fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3_src.pi.gz = 20.00
[Sun May  5 06:14:14 2013] Total counts from fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3_bgd.pi.gz = 30.00
[Sun May  5 06:14:14 2013] Got source and background scale factors 0.000008, 0.000176
[Sun May  5 06:14:14 2013] User source parameters:
  Position = (749.0, 187.8) = 15 13 20.98 -25 24 18.6
  Extent = 2.2 (1.5-3.4)" x 1.1 (0.7-1.6)", rotation angle = 113 (90-90) degrees
  Source aperture counts = 18.7 +/- 5.6
  Background aperture counts = 1.3
  Rate = 0.004 +/- 0.001

[Sun May  5 06:14:14 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 06:14:14 2013] Using photon index=1.80, rate=0.0037, arf fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3.arf
[Sun May  5 06:14:14 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 06:14:14 2013] Updating source flux to 3e-14
[Sun May  5 06:14:17 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 06:14:18 2013] acisf13666/analysis//spectral/fullrun_ccd7_acisf13666_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete