[Tue May  7 06:16:22 2013] Detection parameters:
  Position = (806.6, 700.7) = 5 52 34.67 32 36 30.7
  Extent = 0.6" x 0.5", rotation angle = 85 degrees
  Source counts = 19.6 +/- 4.7
  Background counts = 2.4
  Rate = 0.0002 +/- 5e-05

[Tue May  7 06:16:22 2013] Off-axis axis estimate = 4.78'
[Tue May  7 08:44:52 2013] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:44:52 2013] Initial guess for spatial extent in simple fitting = 1.10"
[Tue May  7 08:44:52 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.840
[Tue May  7 08:44:52 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 1.10"
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src21.ximg exists
[Tue May  7 09:33:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src21.csv
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src21_1.ximg exists
[Tue May  7 09:33:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src21.csv
[Tue May  7 09:33:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Tue May  7 09:33:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src21.csv
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Tue May  7 09:33:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src21.csv
[Tue May  7 09:33:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 09:53:41 2013] Spatial fit model total counts = 19.652700, observed total counts = 23.000000
[Tue May  7 09:53:41 2013] Offset between fit and detection position for source 42 = 0.837624 pixels
[Tue May  7 09:53:41 2013] 17.864830 total counts/ 1.691130 bgd. counts: snr = 12.437150
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.837624 pixels
  Position = (807.1, 701.4) = 5 52 34.67 32 36 30.8
  Extent = 0.7 (0.5-1.4)", rotation angle = 0
  Source counts = 16.2 +/- 4.2
  Background counts = 1.7
  Rate = 0.0002 +/- 5e-05
[Tue May  7 09:53:41 2013] Vigneting correction estimate = 1.000000
[Tue May  7 09:53:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 09:53:41 2013] Assessing source extent using major axis lower bound
[Tue May  7 09:53:41 2013] Source does appear to be extended
[Tue May  7 09:53:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 12:14:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 12:14:23 2013] Initial guess for spatial extent in simple fitting = 0.70"
[Tue May  7 12:14:23 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.815
[Tue May  7 12:14:23 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 0.70"
[Tue May  7 13:00:49 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src21.ximg exists
[Tue May  7 13:00:49 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src21_1.ximg exists
[Tue May  7 13:00:49 2013] Fit fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src21 appears to have run properly
[Tue May  7 13:00:50 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Tue May  7 13:00:50 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Tue May  7 13:00:50 2013] Fit fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Tue May  7 13:33:37 2013] Spatial fit model total counts = 22.624000, observed total counts = 24.000000
[Tue May  7 13:33:37 2013] Offset between fit and detection position for source 42 = 0.189677 pixels
[Tue May  7 13:33:37 2013] 21.242210 total counts/ 6.359410 bgd. counts: snr = 5.901688
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.189677 pixels
  Position = (807.1, 701.6) = 5 52 34.67 32 36 30.9
  Extent = 0.6 (0.4-1.3)", rotation angle = 0
  Source counts = 14.9 +/- 4.6
  Background counts = 6.4
  Rate = 0.0002 +/- 5e-05
[Tue May  7 13:33:37 2013] Vigneting correction estimate = 1.000000
[Tue May  7 13:33:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 13:33:37 2013] Assessing source extent using major axis lower bound
[Tue May  7 13:33:37 2013] Source does appear to be extended
[Tue May  7 13:33:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 14:41:35 2013] Writing source region out to fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42_src.reg
[Tue May  7 14:41:35 2013] Extracting stamp from image fullrun_ccd3_acisf13657_pi14-548_cl_sm2.00.img.gz, (778, 673) - (836, 730)
[Tue May  7 14:41:35 2013] Writing fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42.gif
[Tue May  7 14:53:32 2013] Size of ../../acisf13657/products/events/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42_src.evt.gz[events] = 18 counts
[Tue May  7 14:53:32 2013] Mean chipx,y = (684.83, 507.50)
[Tue May  7 14:53:32 2013] Mean tdetx,y = (4624.50, 3745.83)
[Tue May  7 14:53:32 2013] chipx,y range = (668.00-703.00, 485.00-529.00)
[Tue May  7 14:53:32 2013] Size of ../../acisf13657/products/events/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 22 counts
[Tue May  7 14:53:33 2013] Not generating rmf since there are only 14 counts
[Tue May  7 14:53:33 2013] arf not found, will run specextract
[Tue May  7 14:53:58 2013] ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42.warf not found
[Tue May  7 14:53:58 2013] ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42.wrmf not found
[Tue May  7 14:53:58 2013] Removal of ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42.soff failed
[Tue May  7 15:15:42 2013] Spectrum 42 has only 15 counts, deleting rmf
[Tue May  7 15:15:42 2013] 187.665
[Tue May  7 15:17:26 2013] Updating aperture counts using extracted products
[Tue May  7 15:17:26 2013] Total counts from fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42_src.pi.gz = 18.00
[Tue May  7 15:17:26 2013] Total counts from fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42_bgd.pi.gz = 22.00
[Tue May  7 15:17:26 2013] Got source and background scale factors 0.000001, 0.000014
[Tue May  7 15:17:26 2013] User source parameters:
  Position = (807.1, 701.6) = 5 52 34.67 32 36 30.9
  Extent = 0.6 (0.4-1.3)", rotation angle = 0
  Source aperture counts = 16.1 +/- 5.3
  Background aperture counts = 1.9
  Rate = 0.0002 +/- 6e-05

[Tue May  7 15:17:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue May  7 15:17:31 2013] Using photon index=1.80, rate=0.000161, arf fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src42.arf
[Tue May  7 15:17:31 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May  7 15:17:31 2013] Updating source flux to 2.1e-15
[Tue May  7 15:17:46 2013] Source 42 has fewer than 100.000000 counts, skipping spectral fitting