[Tue May  7 06:16:21 2013] Detection parameters:
  Position = (1174.9, 373.4) = 5 52 20.33 32 33 49.7
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 18.8 +/- 4.5
  Background counts = 1.2
  Rate = 0.0002 +/- 5e-05

[Tue May  7 06:16:22 2013] Off-axis axis estimate = 0.81'
[Tue May  7 08:44:52 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:44:52 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Tue May  7 08:44:52 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.921
[Tue May  7 08:44:52 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 0.38"
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src22.ximg exists
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src22_1.ximg exists
[Tue May  7 09:33:25 2013] Fit fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src22 appears to have run properly
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Tue May  7 09:33:25 2013] Fit fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Tue May  7 09:53:41 2013] Spatial fit model total counts = 27.008000, observed total counts = 27.000000
[Tue May  7 09:53:41 2013] Offset between fit and detection position for source 26 = 0.554336 pixels
[Tue May  7 09:53:41 2013] 27.655520 total counts/ 9.891920 bgd. counts: snr = 5.647948
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.554336 pixels
  Position = (1175.4, 373.6) = 5 52 20.33 32 33 49.6
  Extent = 0.3 (0.3-0.5)" x 0.1 (0.1-0.2)", rotation angle = 11 (2-31) degrees
  Source counts = 17.8 +/- 5.3
  Background counts = 9.9
  Rate = 0.0002 +/- 6e-05
[Tue May  7 09:53:41 2013] Vigneting correction estimate = 1.000000
[Tue May  7 09:53:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 09:53:41 2013] Assessing source extent using major axis lower bound
[Tue May  7 09:53:41 2013] Source does appear to be extended
[Tue May  7 09:53:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.46
[Tue May  7 12:14:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 12:14:23 2013] Initial guess for spatial extent in simple fitting = 0.23"
[Tue May  7 12:14:23 2013] source mask rpix=0.5, npix_max = 3, mask sum = 4, frac = 1.068
[Tue May  7 12:14:23 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 0.23"
[Tue May  7 13:00:49 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src22.ximg exists
[Tue May  7 13:00:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src22.csv
[Tue May  7 13:00:49 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src22_1.ximg exists
[Tue May  7 13:00:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src22.csv
[Tue May  7 13:00:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 13:00:50 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Tue May  7 13:00:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src22.csv
[Tue May  7 13:00:50 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Tue May  7 13:00:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src22.csv
[Tue May  7 13:00:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 13:33:37 2013] Spatial fit model total counts = 18.538800, observed total counts = 27.000000
[Tue May  7 13:33:37 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 13:33:37 2013] Vigneting correction estimate = 1.000000
[Tue May  7 13:33:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 13:33:37 2013] Assessing source extent using major axis lower bound
[Tue May  7 13:33:37 2013] Source does appear to be extended
[Tue May  7 13:33:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.46
[Tue May  7 14:41:35 2013] Writing source region out to fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26_src.reg
[Tue May  7 14:41:35 2013] Extracting stamp from image fullrun_ccd3_acisf13657_pi14-548_cl_sm2.00.img.gz, (1160, 358) - (1190, 389)
[Tue May  7 14:41:35 2013] Writing fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26.gif
[Tue May  7 14:54:07 2013] Size of ../../acisf13657/products/events/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26_src.evt.gz[events] = 17 counts
[Tue May  7 14:54:07 2013] Mean chipx,y = (942.53, 927.12)
[Tue May  7 14:54:07 2013] Mean tdetx,y = (4204.88, 4003.53)
[Tue May  7 14:54:07 2013] chipx,y range = (924.00-959.00, 906.00-945.00)
[Tue May  7 14:54:07 2013] Size of ../../acisf13657/products/events/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 7 counts
[Tue May  7 14:54:08 2013] Not generating rmf since there are only 17 counts
[Tue May  7 14:54:08 2013] arf not found, will run specextract
[Tue May  7 14:54:37 2013] ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26.warf not found
[Tue May  7 14:54:37 2013] ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26.wrmf not found
[Tue May  7 14:54:37 2013] Removal of ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26.soff failed
[Tue May  7 15:15:42 2013] Spectrum 26 has only 18 counts, deleting rmf
[Tue May  7 15:15:42 2013] 202.038
[Tue May  7 15:17:26 2013] Updating aperture counts using extracted products
[Tue May  7 15:17:26 2013] Total counts from fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26_src.pi.gz = 17.00
[Tue May  7 15:17:26 2013] Total counts from fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26_bgd.pi.gz = 7.00
[Tue May  7 15:17:26 2013] Got source and background scale factors 0.000000, 0.000004
[Tue May  7 15:17:26 2013] User source parameters:
  Position = (1175.4, 373.6) = 5 52 20.33 32 33 49.6
  Extent = 0.3 (0.3-0.5)" x 0.1 (0.1-0.2)", rotation angle = 11 (2-31) degrees
  Source aperture counts = 16.8 +/- 5.2
  Background aperture counts = 0.2
  Rate = 0.0002 +/- 6e-05

[Tue May  7 15:17:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue May  7 15:17:31 2013] Using photon index=1.80, rate=0.000193, arf fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src26.arf
[Tue May  7 15:17:31 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May  7 15:17:31 2013] Updating source flux to 2.3e-15
[Tue May  7 15:17:46 2013] Flag p found in src. 26 procflags, skipping spectral fitting
[Tue May  7 15:17:46 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting