[Tue May  7 06:16:21 2013] Detection parameters:
  Position = (848.0, 237.1) = 5 52 33.05 32 32 42.7
  Extent = 0.7" x 0.5", rotation angle = 81 degrees
  Source counts = 11.7 +/- 3.6
  Background counts = 1.3
  Rate = 0.0001 +/- 4e-05

[Tue May  7 06:16:22 2013] Off-axis axis estimate = 3.02'
[Tue May  7 08:44:52 2013] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Tue May  7 08:44:52 2013] Initial guess for spatial extent in simple fitting = 0.58"
[Tue May  7 08:44:52 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.402
[Tue May  7 08:44:52 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 0.58"
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src37.ximg exists
[Tue May  7 09:33:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src37.csv
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src37_1.ximg exists
[Tue May  7 09:33:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src37.csv
[Tue May  7 09:33:25 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13657_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Tue May  7 09:33:25 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Tue May  7 09:33:25 2013] Fit fullrun_ccd3_acisf13657_pi14-548_cl_pass0_tfrozen_src37 appears to have run properly
[Tue May  7 09:53:41 2013] Spatial fit model total counts = 14.698400, observed total counts = 15.000000
[Tue May  7 09:53:41 2013] Offset between fit and detection position for source 17 = 0.596971 pixels
[Tue May  7 09:53:41 2013] 14.470990 total counts/ 3.090890 bgd. counts: snr = 6.472981
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.596971 pixels
  Position = (848.6, 237.3) = 5 52 33.04 32 32 42.5
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 11.4 +/- 3.8
  Background counts = 3.1
  Rate = 0.0001 +/- 4e-05
[Tue May  7 09:53:41 2013] Vigneting correction estimate = 1.000000
[Tue May  7 09:53:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 09:53:41 2013] Assessing source extent using major axis lower bound
[Tue May  7 09:53:41 2013] Source does appear to be extended
[Tue May  7 09:53:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 12:14:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 12:14:23 2013] Initial guess for spatial extent in simple fitting = 0.60"
[Tue May  7 12:14:23 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.769
[Tue May  7 12:14:23 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 0.60"
[Tue May  7 13:00:49 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src37.ximg exists
[Tue May  7 13:00:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src37.csv
[Tue May  7 13:00:49 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src37_1.ximg exists
[Tue May  7 13:00:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src37.csv
[Tue May  7 13:00:49 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13657_pi14-548_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 13:00:50 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src37.ximg exists
[Tue May  7 13:00:50 2013] fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src37_1.ximg exists
[Tue May  7 13:00:50 2013] Fit fullrun_ccd3_acisf13657_pi14-548_cl_pass1_tfrozen_src37 appears to have run properly
[Tue May  7 13:33:37 2013] Spatial fit model total counts = 14.785500, observed total counts = 15.000000
[Tue May  7 13:33:37 2013] Offset between fit and detection position for source 17 = 0.076926 pixels
[Tue May  7 13:33:37 2013] 14.541590 total counts/ 3.533690 bgd. counts: snr = 5.855854
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.076926 pixels
  Position = (848.7, 237.4) = 5 52 33.04 32 32 42.5
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 11.0 +/- 3.8
  Background counts = 3.5
  Rate = 0.0001 +/- 4e-05
[Tue May  7 13:33:37 2013] Vigneting correction estimate = 1.000000
[Tue May  7 13:33:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 13:33:37 2013] Assessing source extent using major axis lower bound
[Tue May  7 13:33:37 2013] Source does appear to be extended
[Tue May  7 13:33:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 14:41:35 2013] Writing source region out to fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17_src.reg
[Tue May  7 14:41:35 2013] Extracting stamp from image fullrun_ccd3_acisf13657_pi14-548_cl_sm2.00.img.gz, (824, 213) - (873, 262)
[Tue May  7 14:41:35 2013] Writing fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17.gif
[Tue May  7 15:02:41 2013] Size of ../../acisf13657/products/events/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17_src.evt.gz[events] = 12 counts
[Tue May  7 15:02:41 2013] Mean chipx,y = (587.25, 964.83)
[Tue May  7 15:02:41 2013] Mean tdetx,y = (4167.17, 3648.25)
[Tue May  7 15:02:41 2013] chipx,y range = (575.00-609.00, 951.00-981.00)
[Tue May  7 15:02:41 2013] Size of ../../acisf13657/products/events/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 15 counts
[Tue May  7 15:02:42 2013] Not generating rmf since there are only 11 counts
[Tue May  7 15:02:42 2013] arf not found, will run specextract
[Tue May  7 15:03:11 2013] ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17.warf not found
[Tue May  7 15:03:11 2013] ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17.wrmf not found
[Tue May  7 15:03:11 2013] Removal of ../../acisf13657/products/spectra/fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17.soff failed
[Tue May  7 15:15:42 2013] Spectrum 17 has only 11 counts, deleting rmf
[Tue May  7 15:15:42 2013] 189.778
[Tue May  7 15:17:28 2013] Updating aperture counts using extracted products
[Tue May  7 15:17:28 2013] Total counts from fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17_src.pi.gz = 12.00
[Tue May  7 15:17:28 2013] Total counts from fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17_bgd.pi.gz = 15.00
[Tue May  7 15:17:28 2013] Got source and background scale factors 0.000001, 0.000011
[Tue May  7 15:17:28 2013] User source parameters:
  Position = (848.7, 237.4) = 5 52 33.04 32 32 42.5
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 10.7 +/- 4.6
  Background aperture counts = 1.3
  Rate = 0.0001 +/- 5e-05

[Tue May  7 15:17:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue May  7 15:17:31 2013] Using photon index=1.80, rate=0.000119, arf fullrun_ccd3_acisf13657_pi14-548_pass1_cl_src17.arf
[Tue May  7 15:17:31 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May  7 15:17:31 2013] Updating source flux to 1.5e-15
[Tue May  7 15:17:46 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting