[Tue May 7 06:15:49 2013] Detection parameters: Position = (944.1, 930.1) = 5 52 17.64 32 30 13.1 Extent = 0.5" x 0.5", rotation angle = 29 degrees Source counts = 13.5 +/- 3.9 Background counts = 1.5 Rate = 0.0001 +/- 4e-05 [Tue May 7 06:15:50 2013] Off-axis axis estimate = 2.88' [Tue May 7 08:00:54 2013] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:00:54 2013] Initial guess for spatial extent in simple fitting = 0.56" [Tue May 7 08:00:54 2013] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.503 [Tue May 7 08:00:54 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 0.56" [Tue May 7 08:44:52 2013] fullrun_ccd2_acisf13657_pi14-548_cl_pass0_src27.ximg exists [Tue May 7 08:44:52 2013] fullrun_ccd2_acisf13657_pi14-548_cl_pass0_src27_1.ximg exists [Tue May 7 08:44:52 2013] Fit fullrun_ccd2_acisf13657_pi14-548_cl_pass0_src27 appears to have run properly [Tue May 7 08:44:52 2013] fullrun_ccd2_acisf13657_pi14-548_cl_pass0_tfrozen_src27.ximg exists [Tue May 7 08:44:52 2013] fullrun_ccd2_acisf13657_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists [Tue May 7 08:44:52 2013] Fit fullrun_ccd2_acisf13657_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly [Tue May 7 09:53:36 2013] Spatial fit model total counts = 16.628800, observed total counts = 17.000000 [Tue May 7 09:53:36 2013] Offset between fit and detection position for source 10 = 1.135702 pixels [Tue May 7 09:53:36 2013] 15.890340 total counts/ 4.472940 bgd. counts: snr = 5.398470 Spatial fit parameters: Offset between fit and detection position for source 10 = 1.135702 pixels Position = (944.7, 931.1) = 5 52 17.63 32 30 13.4 Extent = 0.3 (0.2-0.5)", rotation angle = 0 Source counts = 11.4 +/- 4.0 Background counts = 4.5 Rate = 0.0001 +/- 4e-05 [Tue May 7 09:53:36 2013] Vigneting correction estimate = 1.000000 [Tue May 7 09:53:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 09:53:36 2013] Assessing source extent using major axis lower bound [Tue May 7 09:53:36 2013] Source does appear to be extended [Tue May 7 09:53:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 11:29:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 7 11:29:37 2013] Initial guess for spatial extent in simple fitting = 0.29" [Tue May 7 11:29:37 2013] source mask rpix=0.6, npix_max = 4, mask sum = 4, frac = 0.838 [Tue May 7 11:29:37 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 0.29" [Tue May 7 12:14:23 2013] fullrun_ccd2_acisf13657_pi14-548_cl_pass1_src27.ximg exists [Tue May 7 12:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13657_pi14-548_cl_pass1_src27.csv [Tue May 7 12:14:23 2013] fullrun_ccd2_acisf13657_pi14-548_cl_pass1_src27_1.ximg exists [Tue May 7 12:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13657_pi14-548_cl_pass1_src27.csv [Tue May 7 12:14:23 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13657_pi14-548_cl_pass1_src27_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13657_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 12:14:23 2013] fullrun_ccd2_acisf13657_pi14-548_cl_pass1_tfrozen_src27.ximg exists [Tue May 7 12:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13657_pi14-548_cl_pass1_tfrozen_src27.csv [Tue May 7 12:14:23 2013] fullrun_ccd2_acisf13657_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists [Tue May 7 12:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13657_pi14-548_cl_pass1_tfrozen_src27.csv [Tue May 7 12:14:23 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13657_pi14-548_cl_pass1_tfrozen_src27_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13657_pi14-548_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 13:33:32 2013] Spatial fit model total counts = 15.749800, observed total counts = 17.000000 [Tue May 7 13:33:32 2013] Offset between fit and detection position for source 10 = 0.019390 pixels [Tue May 7 13:33:32 2013] 14.807070 total counts/ 3.352770 bgd. counts: snr = 6.255567 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.019390 pixels Position = (944.7, 931.1) = 5 52 17.63 32 30 13.4 Extent = 0.3 (0.2-0.5)", rotation angle = 0 Source counts = 11.5 +/- 3.8 Background counts = 3.4 Rate = 0.0001 +/- 4e-05 [Tue May 7 13:33:32 2013] Vigneting correction estimate = 1.000000 [Tue May 7 13:33:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 13:33:32 2013] Assessing source extent using major axis lower bound [Tue May 7 13:33:32 2013] Source does appear to be extended [Tue May 7 13:33:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 14:13:07 2013] Writing source region out to fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10_src.reg [Tue May 7 14:13:07 2013] Extracting stamp from image fullrun_ccd2_acisf13657_pi14-548_cl_sm2.00.img.gz, (931, 917) - (959, 945) [Tue May 7 14:13:07 2013] Writing fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10.gif [Tue May 7 14:28:50 2013] Size of ../../acisf13657/products/events/fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10_src.evt.gz[events] = 12 counts [Tue May 7 14:28:50 2013] Mean chipx,y = (151.58, 699.08) [Tue May 7 14:28:50 2013] Mean tdetx,y = (3760.08, 3934.42) [Tue May 7 14:28:50 2013] chipx,y range = (129.00-160.00, 683.00-725.00) [Tue May 7 14:28:50 2013] Size of ../../acisf13657/products/events/fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 2 counts [Tue May 7 14:28:52 2013] Not generating rmf since there are only 11 counts [Tue May 7 14:28:52 2013] arf not found, will run specextract [Tue May 7 14:29:19 2013] ../../acisf13657/products/spectra/fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10.warf not found [Tue May 7 14:29:19 2013] ../../acisf13657/products/spectra/fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10.wrmf not found [Tue May 7 14:29:19 2013] Removal of ../../acisf13657/products/spectra/fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10.soff failed [Tue May 7 14:41:34 2013] Spectrum 10 has only 11 counts, deleting rmf [Tue May 7 14:41:34 2013] 175.037 [Tue May 7 15:17:19 2013] Updating aperture counts using extracted products [Tue May 7 15:17:19 2013] Total counts from fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10_src.pi.gz = 12.00 [Tue May 7 15:17:19 2013] Total counts from fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10_bgd.pi.gz = 2.00 [Tue May 7 15:17:19 2013] Got source and background scale factors 0.000000, 0.000004 [Tue May 7 15:17:19 2013] User source parameters: Position = (944.7, 931.1) = 5 52 17.63 32 30 13.4 Extent = 0.3 (0.2-0.5)", rotation angle = 0 Source aperture counts = 11.8 +/- 4.6 Background aperture counts = 0.2 Rate = 0.0001 +/- 5e-05 [Tue May 7 15:17:22 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 7 15:17:22 2013] Using photon index=1.80, rate=0.000124, arf fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10.arf [Tue May 7 15:17:22 2013] Assuming count rate is from the 0.20-8.00 bandpass [Tue May 7 15:17:22 2013] Updating source flux to 1.7e-15 [Tue May 7 15:17:45 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting [Tue May 7 15:17:46 2013] acisf13657/analysis//spectral/fullrun_ccd2_acisf13657_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete