[Wed May 15 13:00:17 2013] Detection parameters:
  Position = (668.1, 925.3) = 5 52 4.17 32 31 31.3
  Extent = 0.7" x 0.5", rotation angle = 26 degrees
  Source counts = 14.0 +/- 4.0
  Background counts = 2.0
  Rate = 8e-05 +/- 2e-05

[Wed May 15 13:00:18 2013] Off-axis axis estimate = 3.75'
[Wed May 15 16:08:13 2013] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Wed May 15 16:08:13 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Wed May 15 16:08:13 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.959
[Wed May 15 16:08:13 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 0.76"
[Wed May 15 17:29:05 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src61.ximg exists
[Wed May 15 17:29:05 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src61_1.ximg exists
[Wed May 15 17:29:05 2013] Fit fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src61 appears to have run properly
[Wed May 15 17:29:05 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Wed May 15 17:29:05 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Wed May 15 17:29:05 2013] Fit fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Wed May 15 18:01:15 2013] Spatial fit model total counts = 20.999500, observed total counts = 21.000000
[Wed May 15 18:01:15 2013] Offset between fit and detection position for source 41 = 1.512995 pixels
[Wed May 15 18:01:15 2013] 20.508400 total counts/ 8.236700 bgd. counts: snr = 4.275906
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.512995 pixels
  Position = (669.3, 926.2) = 5 52 4.14 32 31 31.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 12.3 +/- 4.5
  Background counts = 8.2
  Rate = 7e-05 +/- 3e-05
[Wed May 15 18:01:15 2013] Vigneting correction estimate = 1.000000
[Wed May 15 18:01:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 18:01:15 2013] Assessing source extent using major axis lower bound
[Wed May 15 18:01:15 2013] Source does appear to be extended
[Wed May 15 18:01:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 20:58:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 20:58:03 2013] Initial guess for spatial extent in simple fitting = 0.41"
[Wed May 15 20:58:03 2013] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.282
[Wed May 15 20:58:03 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 0.41"
[Wed May 15 22:05:12 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src60.ximg exists
[Wed May 15 22:05:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src60.csv
[Wed May 15 22:05:12 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src60_1.ximg exists
[Wed May 15 22:05:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src60.csv
[Wed May 15 22:05:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 22:05:13 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src60.ximg exists
[Wed May 15 22:05:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src60.csv
[Wed May 15 22:05:13 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src60_1.ximg exists
[Wed May 15 22:05:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src60.csv
[Wed May 15 22:05:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 22:35:11 2013] Spatial fit model total counts = 15.760800, observed total counts = 20.000000
[Wed May 15 22:35:11 2013] Offset between fit and detection position for source 41 = 0.039774 pixels
[Wed May 15 22:35:11 2013] 14.243910 total counts/ 1.370810 bgd. counts: snr = 10.994982
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.039774 pixels
  Position = (669.2, 926.2) = 5 52 4.15 32 31 31.5
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 12.9 +/- 3.8
  Background counts = 1.4
  Rate = 8e-05 +/- 2e-05
[Wed May 15 22:35:11 2013] Vigneting correction estimate = 1.000000
[Wed May 15 22:35:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 22:35:11 2013] Assessing source extent using major axis lower bound
[Wed May 15 22:35:11 2013] Source does appear to be extended
[Wed May 15 22:35:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 00:08:15 2013] Writing source region out to fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41_src.reg
[Thu May 16 00:08:15 2013] Extracting stamp from image fullrun_ccd3_acisf13656_pi14-548_cl_sm2.00.img.gz, (648, 905) - (690, 947)
[Thu May 16 00:08:15 2013] Writing fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41.gif
[Thu May 16 00:44:39 2013] Size of ../../acisf13656/products/events/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41_src.evt.gz[events] = 14 counts
[Thu May 16 00:44:39 2013] Mean chipx,y = (549.36, 808.36)
[Thu May 16 00:44:39 2013] Mean tdetx,y = (4323.64, 3610.36)
[Thu May 16 00:44:39 2013] chipx,y range = (537.00-570.00, 785.00-826.00)
[Thu May 16 00:44:39 2013] Size of ../../acisf13656/products/events/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41_bgd.evt.gz[events] = 10 counts
[Thu May 16 00:44:40 2013] Not generating rmf since there are only 12 counts
[Thu May 16 00:44:40 2013] arf not found, will run specextract
[Thu May 16 00:45:07 2013] ../../acisf13656/products/spectra/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41.warf not found
[Thu May 16 00:45:07 2013] ../../acisf13656/products/spectra/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41.wrmf not found
[Thu May 16 00:45:07 2013] Removal of ../../acisf13656/products/spectra/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41.soff failed
[Thu May 16 01:03:06 2013] Spectrum 41 has only 13 counts, deleting rmf
[Thu May 16 01:03:06 2013] 184.499
[Thu May 16 01:05:26 2013] Updating aperture counts using extracted products
[Thu May 16 01:05:26 2013] Total counts from fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41_src.pi.gz = 14.00
[Thu May 16 01:05:26 2013] Total counts from fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41_bgd.pi.gz = 10.00
[Thu May 16 01:05:26 2013] Got source and background scale factors 0.000001, 0.000008
[Thu May 16 01:05:26 2013] User source parameters:
  Position = (669.2, 926.2) = 5 52 4.15 32 31 31.5
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source aperture counts = 13.2 +/- 4.8
  Background aperture counts = 0.8
  Rate = 8e-05 +/- 3e-05

[Thu May 16 01:05:31 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 01:05:31 2013] Using photon index=1.80, rate=7.78e-05, arf fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src41.arf
[Thu May 16 01:05:31 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 16 01:05:31 2013] Updating source flux to 1e-15
[Thu May 16 01:06:21 2013] Source 41 has fewer than 100.000000 counts, skipping spectral fitting