[Wed May 15 13:00:17 2013] Detection parameters: Position = (307.5, 820.2) = 5 52 18.20 32 30 39.6 Extent = 0.8" x 0.5", rotation angle = 125 degrees Source counts = 28.6 +/- 5.7 Background counts = 3.4 Rate = 0.0002 +/- 3e-05 [Wed May 15 13:00:18 2013] Off-axis axis estimate = 3.33' [Wed May 15 16:08:13 2013] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting [Wed May 15 16:08:13 2013] Initial guess for spatial extent in simple fitting = 0.65" [Wed May 15 16:08:13 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.901 [Wed May 15 16:08:13 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 0.65" [Wed May 15 17:29:05 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src27.ximg exists [Wed May 15 17:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src27.csv [Wed May 15 17:29:05 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src27_1.ximg exists [Wed May 15 17:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src27.csv [Wed May 15 17:29:05 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src27_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf13656_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 17:29:05 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src27.ximg exists [Wed May 15 17:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src27.csv [Wed May 15 17:29:05 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists [Wed May 15 17:29:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src27.csv [Wed May 15 17:29:05 2013] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src27_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf13656_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 18:01:15 2013] Spatial fit model total counts = 27.326200, observed total counts = 33.000000 [Wed May 15 18:01:15 2013] Offset between fit and detection position for source 25 = 0.860644 pixels [Wed May 15 18:01:15 2013] 28.836083 total counts/ 0.638383 bgd. counts: snr = 35.291737 Spatial fit parameters: Offset between fit and detection position for source 25 = 0.860644 pixels Position = (308.4, 820.0) = 5 52 18.18 32 30 39.3 Extent = 0.6 (0.5-0.9)" x 0.4 (0.3-0.5)", rotation angle = 44 (22-252) degrees Source counts = 28.2 +/- 5.4 Background counts = 0.6 Rate = 0.0002 +/- 3e-05 [Wed May 15 18:01:15 2013] Vigneting correction estimate = 1.000000 [Wed May 15 18:01:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 18:01:15 2013] Assessing source extent using major axis lower bound [Wed May 15 18:01:15 2013] Source does appear to be extended [Wed May 15 18:01:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00 [Wed May 15 20:58:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 15 20:58:03 2013] Initial guess for spatial extent in simple fitting = 0.50" [Wed May 15 20:58:03 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.970 [Wed May 15 20:58:03 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 0.50" [Wed May 15 22:05:12 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src27.ximg exists [Wed May 15 22:05:12 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src27_1.ximg exists [Wed May 15 22:05:12 2013] Fit fullrun_ccd3_acisf13656_pi14-548_cl_pass1_src27 appears to have run properly [Wed May 15 22:05:13 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src27.ximg exists [Wed May 15 22:05:13 2013] fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists [Wed May 15 22:05:13 2013] Fit fullrun_ccd3_acisf13656_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly [Wed May 15 22:35:11 2013] Spatial fit model total counts = 33.425200, observed total counts = 34.000000 [Wed May 15 22:35:11 2013] Offset between fit and detection position for source 25 = 0.110773 pixels [Wed May 15 22:35:11 2013] 34.421730 total counts/ 7.488430 bgd. counts: snr = 9.842245 Spatial fit parameters: Offset between fit and detection position for source 25 = 0.110773 pixels Position = (308.3, 820.1) = 5 52 18.19 32 30 39.4 Extent = 0.6 (0.4-0.8)" x 0.4 (0.3-0.5)", rotation angle = 227 (122-349) degrees Source counts = 26.9 +/- 5.9 Background counts = 7.5 Rate = 0.0002 +/- 4e-05 [Wed May 15 22:35:11 2013] Vigneting correction estimate = 1.000000 [Wed May 15 22:35:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 22:35:11 2013] Assessing source extent using major axis lower bound [Wed May 15 22:35:11 2013] Source does appear to be extended [Wed May 15 22:35:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.90 [Thu May 16 00:08:14 2013] Writing source region out to fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25_src.reg [Thu May 16 00:08:14 2013] Extracting stamp from image fullrun_ccd3_acisf13656_pi14-548_cl_sm2.00.img.gz, (281, 793) - (335, 847) [Thu May 16 00:08:14 2013] Writing fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25.gif [Thu May 16 00:24:02 2013] Size of ../../acisf13656/products/events/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25_src.evt.gz[events] = 28 counts [Thu May 16 00:24:02 2013] Mean chipx,y = (874.50, 616.82) [Thu May 16 00:24:02 2013] Mean tdetx,y = (4515.18, 3935.50) [Thu May 16 00:24:02 2013] chipx,y range = (858.00-893.00, 598.00-634.00) [Thu May 16 00:24:02 2013] Size of ../../acisf13656/products/events/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 29 counts [Thu May 16 00:24:03 2013] Not generating rmf since there are only 26 counts [Thu May 16 00:24:03 2013] arf not found, will run specextract [Thu May 16 00:24:34 2013] ../../acisf13656/products/spectra/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25.warf not found [Thu May 16 00:24:34 2013] ../../acisf13656/products/spectra/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25.wrmf not found [Thu May 16 00:24:34 2013] Removal of ../../acisf13656/products/spectra/fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25.soff failed [Thu May 16 01:03:06 2013] Spectrum 25 has only 27 counts, deleting rmf [Thu May 16 01:03:06 2013] 195.821 [Thu May 16 01:05:21 2013] Updating aperture counts using extracted products [Thu May 16 01:05:21 2013] Total counts from fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25_src.pi.gz = 28.00 [Thu May 16 01:05:21 2013] Total counts from fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25_bgd.pi.gz = 29.00 [Thu May 16 01:05:21 2013] Got source and background scale factors 0.000001, 0.000013 [Thu May 16 01:05:21 2013] User source parameters: Position = (308.3, 820.1) = 5 52 18.19 32 30 39.4 Extent = 0.6 (0.4-0.8)" x 0.4 (0.3-0.5)", rotation angle = 227 (122-349) degrees Source aperture counts = 26.5 +/- 6.4 Background aperture counts = 1.5 Rate = 0.0002 +/- 4e-05 [Thu May 16 01:05:31 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 16 01:05:31 2013] Using photon index=1.80, rate=0.000163, arf fullrun_ccd3_acisf13656_pi14-548_pass1_cl_src25.arf [Thu May 16 01:05:31 2013] Assuming count rate is from the 0.20-8.00 bandpass [Thu May 16 01:05:31 2013] Updating source flux to 2e-15 [Thu May 16 01:06:21 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting