[Wed May 15 12:59:43 2013] Detection parameters:
  Position = (146.8, 602.4) = 5 52 14.25 32 37 12.4
  Extent = 0.7" x 0.5", rotation angle = 89 degrees
  Source counts = 10.7 +/- 3.6
  Background counts = 2.3
  Rate = 6e-05 +/- 2e-05

[Wed May 15 12:59:44 2013] Off-axis axis estimate = 3.29'
[Wed May 15 14:56:48 2013] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Wed May 15 14:56:48 2013] Initial guess for spatial extent in simple fitting = 0.64"
[Wed May 15 14:56:48 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.919
[Wed May 15 14:56:48 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 0.64"
[Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src50.ximg exists
[Wed May 15 16:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src50.csv
[Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src50_1.ximg exists
[Wed May 15 16:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src50.csv
[Wed May 15 16:08:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src50.ximg exists
[Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src50_1.ximg exists
[Wed May 15 16:08:13 2013] Fit fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src50 appears to have run properly
[Wed May 15 18:01:06 2013] Spatial fit model total counts = 15.631400, observed total counts = 16.000000
[Wed May 15 18:01:06 2013] Offset between fit and detection position for source 57 = 0.989761 pixels
[Wed May 15 18:01:06 2013] 16.313510 total counts/ 5.235110 bgd. counts: snr = 4.841881
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.989761 pixels
  Position = (147.3, 603.3) = 5 52 14.25 32 37 12.5
  Extent = 0.6 (0.5-1.2)", rotation angle = 0
  Source counts = 11.1 +/- 4.0
  Background counts = 5.2
  Rate = 7e-05 +/- 2e-05
[Wed May 15 18:01:06 2013] Vigneting correction estimate = 1.000000
[Wed May 15 18:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 18:01:06 2013] Assessing source extent using major axis lower bound
[Wed May 15 18:01:06 2013] Source does appear to be extended
[Wed May 15 18:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 19:42:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 19:42:38 2013] Initial guess for spatial extent in simple fitting = 0.64"
[Wed May 15 19:42:38 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.923
[Wed May 15 19:42:38 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 0.64"
[Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src50.ximg exists
[Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src50.csv
[Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src50_1.ximg exists
[Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src50.csv
[Wed May 15 20:58:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src50.ximg exists
[Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src50_1.ximg exists
[Wed May 15 20:58:03 2013] Fit fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src50 appears to have run properly
[Wed May 15 22:35:03 2013] Spatial fit model total counts = 15.729500, observed total counts = 16.000000
[Wed May 15 22:35:03 2013] Offset between fit and detection position for source 57 = 0.055311 pixels
[Wed May 15 22:35:03 2013] 16.153380 total counts/ 5.307980 bgd. counts: snr = 4.707398
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 0.055311 pixels
  Position = (147.4, 603.2) = 5 52 14.25 32 37 12.5
  Extent = 0.6 (0.5-1.3)", rotation angle = 0
  Source counts = 10.8 +/- 4.0
  Background counts = 5.3
  Rate = 7e-05 +/- 2e-05
[Wed May 15 22:35:03 2013] Vigneting correction estimate = 1.000000
[Wed May 15 22:35:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 22:35:03 2013] Assessing source extent using major axis lower bound
[Wed May 15 22:35:03 2013] Source does appear to be extended
[Wed May 15 22:35:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 23:32:26 2013] Writing source region out to fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57_src.reg
[Wed May 15 23:32:26 2013] Extracting stamp from image fullrun_ccd2_acisf13656_pi14-548_cl_sm2.00.img.gz, (118, 574) - (177, 633)
[Wed May 15 23:32:26 2013] Writing fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57.gif
[Thu May 16 00:03:19 2013] Size of ../../acisf13656/products/events/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57_src.evt.gz[events] = 12 counts
[Thu May 16 00:03:19 2013] Mean chipx,y = (60.92, 650.58)
[Thu May 16 00:03:19 2013] Mean tdetx,y = (3711.58, 4025.08)
[Thu May 16 00:03:19 2013] chipx,y range = (38.00-75.00, 631.00-671.00)
[Thu May 16 00:03:19 2013] Size of ../../acisf13656/products/events/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57_bgd.evt.gz[events] = 46 counts
[Thu May 16 00:03:20 2013] Not generating rmf since there are only 10 counts
[Thu May 16 00:03:20 2013] arf not found, will run specextract
[Thu May 16 00:03:53 2013] ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57.warf not found
[Thu May 16 00:03:53 2013] ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57.wrmf not found
[Thu May 16 00:03:53 2013] Removal of ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57.soff failed
[Thu May 16 00:08:14 2013] Spectrum 57 has only 11 counts, deleting rmf
[Thu May 16 00:08:14 2013] 193.652
[Thu May 16 01:05:15 2013] Updating aperture counts using extracted products
[Thu May 16 01:05:15 2013] Total counts from fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57_src.pi.gz = 12.00
[Thu May 16 01:05:15 2013] Total counts from fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57_bgd.pi.gz = 46.00
[Thu May 16 01:05:15 2013] Got source and background scale factors 0.000001, 0.000015
[Thu May 16 01:05:15 2013] User source parameters:
  Position = (147.4, 603.2) = 5 52 14.25 32 37 12.5
  Extent = 0.6 (0.5-1.3)", rotation angle = 0
  Source aperture counts = 8.1 +/- 4.6
  Background aperture counts = 3.9
  Rate = 5e-05 +/- 3e-05

[Thu May 16 01:05:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 01:05:17 2013] Using photon index=1.80, rate=6.55e-05, arf fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src57.arf
[Thu May 16 01:05:17 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 16 01:05:17 2013] Updating source flux to 8.2e-16
[Thu May 16 01:06:07 2013] Source 57 has fewer than 100.000000 counts, skipping spectral fitting