[Wed May 15 12:59:43 2013] Detection parameters: Position = (341.5, 965.5) = 5 52 6.67 32 40 11.0 Extent = 0.5" x 0.5", rotation angle = 90 degrees Source counts = 19.5 +/- 4.9 Background counts = 4.5 Rate = 0.0001 +/- 3e-05 [Wed May 15 12:59:44 2013] Off-axis axis estimate = 6.61' [Wed May 15 14:56:48 2013] Using EEF radius (= 1.95 ")to estimate initial spatial extent for simple fitting [Wed May 15 14:56:48 2013] Initial guess for spatial extent in simple fitting = 1.95" [Wed May 15 14:56:48 2013] source mask rpix=4.0, npix_max = 79, mask sum = 70, frac = 0.876 [Wed May 15 14:56:48 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 1.95" [Wed May 15 16:08:12 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src35.ximg exists [Wed May 15 16:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src35.csv [Wed May 15 16:08:12 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src35_1.ximg exists [Wed May 15 16:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src35.csv [Wed May 15 16:08:12 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src35_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src35.ximg exists [Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists [Wed May 15 16:08:13 2013] Fit fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly [Wed May 15 18:01:06 2013] Spatial fit model total counts = 69.502200, observed total counts = 62.000000 [Wed May 15 18:01:06 2013] Offset between fit and detection position for source 35 = 1.760689 pixels [Wed May 15 18:01:06 2013] 67.808000 total counts/ 49.809100 bgd. counts: snr = 2.550302 Spatial fit parameters: Offset between fit and detection position for source 35 = 1.760689 pixels Position = (342.8, 966.7) = 5 52 6.64 32 40 11.3 Extent = 0.9 (0.5-1.7)", rotation angle = 76 (49-130) degrees Source counts = 18.0 +/- 8.2 Background counts = 49.8 Rate = 0.0001 +/- 5e-05 [Wed May 15 18:01:06 2013] Vigneting correction estimate = 1.000000 [Wed May 15 18:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 18:01:06 2013] Assessing source extent using major axis lower bound [Wed May 15 18:01:06 2013] Source does appear to be extended [Wed May 15 18:01:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.64 [Wed May 15 18:01:06 2013] Source is confused with source 29 [Wed May 15 19:42:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 15 19:42:38 2013] Initial guess for spatial extent in simple fitting = 0.71" [Wed May 15 19:42:38 2013] source mask rpix=1.4, npix_max = 14, mask sum = 11, frac = 0.734 [Wed May 15 19:42:38 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 0.71" [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src35.ximg exists [Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src35.csv [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src35_1.ximg exists [Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src35.csv [Wed May 15 20:58:03 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src35.ximg exists [Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src35.csv [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists [Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src35.csv [Wed May 15 20:58:03 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src35_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 22:35:03 2013] Spatial fit model total counts = 44.237300, observed total counts = 39.000000 [Wed May 15 22:35:03 2013] Offset between fit and detection position for source 35 = 0.200003 pixels [Wed May 15 22:35:03 2013] 44.695400 total counts/ 29.280800 bgd. counts: snr = 2.848661 Spatial fit parameters: Offset between fit and detection position for source 35 = 0.200003 pixels Position = (342.6, 966.7) = 5 52 6.64 32 40 11.3 Extent = 1.0 (0.5-1.5)" x 0.3 (0.2-0.6)", rotation angle = 76 (62-108) degrees Source counts = 15.4 +/- 6.7 Background counts = 29.3 Rate = 9e-05 +/- 4e-05 [Wed May 15 22:35:03 2013] Vigneting correction estimate = 1.000000 [Wed May 15 22:35:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 22:35:03 2013] Assessing source extent using major axis lower bound [Wed May 15 22:35:03 2013] Source does appear to be extended [Wed May 15 22:35:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86 [Wed May 15 23:32:26 2013] Writing source region out to fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35_src.reg [Wed May 15 23:32:26 2013] Extracting stamp from image fullrun_ccd2_acisf13656_pi14-548_cl_sm2.00.img.gz, (297, 921) - (388, 1012) [Wed May 15 23:32:26 2013] Writing fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35.gif [Wed May 15 23:53:10 2013] Size of ../../acisf13656/products/events/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35_src.evt.gz[events] = 17 counts [Wed May 15 23:53:10 2013] Mean chipx,y = (158.12, 249.76) [Wed May 15 23:53:10 2013] Mean tdetx,y = (3310.76, 3927.88) [Wed May 15 23:53:10 2013] chipx,y range = (143.00-179.00, 232.00-273.00) [Wed May 15 23:53:10 2013] Size of ../../acisf13656/products/events/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 65 counts [Wed May 15 23:53:12 2013] Not generating rmf since there are only 15 counts [Wed May 15 23:53:12 2013] arf not found, will run specextract [Wed May 15 23:53:33 2013] ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35.warf not found [Wed May 15 23:53:33 2013] ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35.wrmf not found [Wed May 15 23:53:33 2013] Removal of ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35.soff failed [Thu May 16 00:08:14 2013] Spectrum 35 has only 15 counts, deleting rmf [Thu May 16 00:08:14 2013] 172.057 [Thu May 16 01:05:13 2013] Updating aperture counts using extracted products [Thu May 16 01:05:13 2013] Total counts from fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35_src.pi.gz = 17.00 [Thu May 16 01:05:13 2013] Total counts from fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35_bgd.pi.gz = 65.00 [Thu May 16 01:05:13 2013] Got source and background scale factors 0.000001, 0.000029 [Thu May 16 01:05:13 2013] User source parameters: Position = (342.6, 966.7) = 5 52 6.64 32 40 11.3 Extent = 1.0 (0.5-1.5)" x 0.3 (0.2-0.6)", rotation angle = 76 (62-108) degrees Source aperture counts = 14.9 +/- 5.2 Background aperture counts = 2.1 Rate = 9e-05 +/- 3e-05 [Thu May 16 01:05:17 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 16 01:05:17 2013] Using photon index=1.80, rate=9.31e-05, arf fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src35.arf [Thu May 16 01:05:17 2013] Assuming count rate is from the 0.20-8.00 bandpass [Thu May 16 01:05:17 2013] Updating source flux to 1.3e-15 [Thu May 16 01:06:07 2013] Flag c found in src. 35 procflags, skipping spectral fitting [Thu May 16 01:06:07 2013] Source 35 has fewer than 100.000000 counts, skipping spectral fitting