[Wed May 15 12:59:43 2013] Detection parameters: Position = (338.5, 975.8) = 5 52 6.78 32 40 16.0 Extent = 1.8" x 1.0", rotation angle = 7 degrees Source counts = 27.4 +/- 6.0 Background counts = 8.6 Rate = 0.0002 +/- 4e-05 [Wed May 15 12:59:44 2013] Off-axis axis estimate = 6.68' [Wed May 15 14:56:48 2013] Using EEF radius (= 1.99 ")to estimate initial spatial extent for simple fitting [Wed May 15 14:56:48 2013] Initial guess for spatial extent in simple fitting = 1.99" [Wed May 15 14:56:48 2013] source mask rpix=4.1, npix_max = 82, mask sum = 81, frac = 0.978 [Wed May 15 14:56:48 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 1.99" [Wed May 15 16:08:12 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src25.ximg exists [Wed May 15 16:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src25.csv [Wed May 15 16:08:12 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src25_1.ximg exists [Wed May 15 16:08:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src25.csv [Wed May 15 16:08:12 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src25.ximg exists [Wed May 15 16:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src25.csv [Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists [Wed May 15 16:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src25.csv [Wed May 15 16:08:13 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src25_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 18:01:06 2013] Spatial fit model total counts = 48.060000, observed total counts = 65.000000 [Wed May 15 18:01:06 2013] Poor agreement between spatial fit and data for source 29 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 15 18:01:06 2013] Vigneting correction estimate = 1.000000 [Wed May 15 18:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 18:01:06 2013] Assessing source extent using major [Wed May 15 18:01:06 2013] Source does appear to be extended [Wed May 15 18:01:06 2013] Computing asymmetry using major and minor axis, asym = 1.83 [Wed May 15 18:01:06 2013] Source is asymmetric [Wed May 15 18:01:06 2013] Source is confused with source 35 [Wed May 15 19:42:38 2013] Using EEF radius (= 1.99 ")to estimate initial spatial extent for simple fitting [Wed May 15 19:42:38 2013] Initial guess for spatial extent in simple fitting = 1.99" [Wed May 15 19:42:38 2013] source mask rpix=4.1, npix_max = 82, mask sum = 81, frac = 0.978 [Wed May 15 19:42:38 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 1.99" [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src25.ximg exists [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src25_1.ximg exists [Wed May 15 20:58:03 2013] Fit fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src25 appears to have run properly [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src25.ximg exists [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists [Wed May 15 20:58:03 2013] Fit fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly [Wed May 15 22:35:03 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 142.531183 pixels away [Wed May 15 22:35:03 2013] Spatial fit model total counts = 62.167300, observed total counts = 65.000000 [Wed May 15 22:35:03 2013] Offset between fit and detection position for source 29 = 1.690019 pixels [Wed May 15 22:35:03 2013] 62.720500 total counts/ 38.655100 bgd. counts: snr = 3.870702 Spatial fit parameters: Offset between fit and detection position for source 29 = 1.690019 pixels Position = (336.9, 976.4) = 5 52 6.86 32 40 16.1 Extent = 1.8 (1.2-3.1)" x 1.1 (0.7-1.7)", rotation angle = 22 Source counts = 24.1 +/- 7.9 Background counts = 38.7 Rate = 0.0001 +/- 5e-05 [Wed May 15 22:35:03 2013] Vigneting correction estimate = 1.000000 [Wed May 15 22:35:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 22:35:03 2013] Assessing source extent using major axis lower bound [Wed May 15 22:35:03 2013] Source does appear to be extended [Wed May 15 22:35:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.71 [Wed May 15 23:32:26 2013] Writing source region out to fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29_src.reg [Wed May 15 23:32:26 2013] Extracting stamp from image fullrun_ccd2_acisf13656_pi14-548_cl_sm2.00.img.gz, (255, 894) - (419, 1059) [Wed May 15 23:32:26 2013] Writing fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29.gif [Wed May 15 23:47:07 2013] Size of ../../acisf13656/products/events/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29_src.evt.gz[events] = 47 counts [Wed May 15 23:47:07 2013] Mean chipx,y = (156.06, 241.98) [Wed May 15 23:47:07 2013] Mean tdetx,y = (3302.98, 3929.94) [Wed May 15 23:47:07 2013] chipx,y range = (131.00-179.00, 216.00-265.00) [Wed May 15 23:47:07 2013] Size of ../../acisf13656/products/events/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 241 counts [Wed May 15 23:47:09 2013] Not generating rmf since there are only 24 counts [Wed May 15 23:47:09 2013] arf not found, will run specextract [Wed May 15 23:47:34 2013] ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29.warf not found [Wed May 15 23:47:34 2013] ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29.wrmf not found [Wed May 15 23:47:34 2013] Removal of ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29.soff failed [Thu May 16 00:08:13 2013] Spectrum 29 has only 24 counts, deleting rmf [Thu May 16 00:08:13 2013] 171.349 [Thu May 16 01:05:12 2013] Updating aperture counts using extracted products [Thu May 16 01:05:12 2013] Total counts from fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29_src.pi.gz = 47.00 [Thu May 16 01:05:12 2013] Total counts from fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29_bgd.pi.gz = 241.00 [Thu May 16 01:05:12 2013] Got source and background scale factors 0.000006, 0.000118 [Thu May 16 01:05:12 2013] User source parameters: Position = (336.9, 976.4) = 5 52 6.86 32 40 16.1 Extent = 1.8 (1.2-3.1)" x 1.1 (0.7-1.7)", rotation angle = 22 Source aperture counts = 34.6 +/- 7.9 Background aperture counts = 12.4 Rate = 0.0002 +/- 5e-05 [Thu May 16 01:05:17 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 16 01:05:17 2013] Using photon index=1.80, rate=0.000145, arf fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src29.arf [Thu May 16 01:05:17 2013] Assuming count rate is from the 0.20-8.00 bandpass [Thu May 16 01:05:17 2013] Updating source flux to 2e-15 [Thu May 16 01:06:07 2013] Flag p found in src. 29 procflags, skipping spectral fitting [Thu May 16 01:06:07 2013] Flag c found in src. 29 procflags, skipping spectral fitting [Thu May 16 01:06:07 2013] Source 29 has fewer than 100.000000 counts, skipping spectral fitting