[Wed May 15 12:59:42 2013] Detection parameters: Position = (408.3, 871.5) = 5 52 4.07 32 39 24.7 Extent = 1.7" x 1.1", rotation angle = 105 degrees Source counts = 2013.1 +/- 45.7 Background counts = 73.9 Rate = 0.01 +/- 0.0003 [Wed May 15 12:59:44 2013] Off-axis axis estimate = 6.13' [Wed May 15 14:56:48 2013] Using EEF radius (= 1.69 ")to estimate initial spatial extent for simple fitting [Wed May 15 14:56:48 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 15 14:56:48 2013] Initial guess for spatial extent in simple fitting = 1.69" [Wed May 15 14:56:48 2013] source mask rpix=3.4, npix_max = 62, mask sum = 56, frac = 0.900 [Wed May 15 14:56:48 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.69" [Wed May 15 16:08:12 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src1.ximg exists [Wed May 15 16:08:12 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src1_1.ximg exists [Wed May 15 16:08:12 2013] Fit fullrun_ccd2_acisf13656_pi14-548_cl_pass0_src1 appears to have run properly [Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Wed May 15 16:08:13 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Wed May 15 16:08:13 2013] Fit fullrun_ccd2_acisf13656_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Wed May 15 18:01:06 2013] Spatial fit model total counts = 2128.870000, observed total counts = 2144.000000 [Wed May 15 18:01:06 2013] Offset between fit and detection position for source 1 = 0.885811 pixels [Wed May 15 18:01:06 2013] 2132.783000 total counts/ 224.173000 bgd. counts: snr = 127.475153 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.885811 pixels Position = (409.1, 872.0) = 5 52 4.05 32 39 24.7 Extent = 2.0 (1.9-2.1)" x 1.2 (1.1-1.2)", rotation angle = 73 (71-77) degrees Source counts = 1908.6 +/- 46.2 Background counts = 224.2 Rate = 0.01 +/- 0.0003 [Wed May 15 18:01:06 2013] Vigneting correction estimate = 1.000000 [Wed May 15 18:01:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 18:01:06 2013] Assessing source extent using major axis lower bound [Wed May 15 18:01:06 2013] Source does appear to be extended [Wed May 15 18:01:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.57 [Wed May 15 18:01:06 2013] Source is asymmetric [Wed May 15 19:42:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 15 19:42:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 15 19:42:38 2013] Initial guess for spatial extent in simple fitting = 1.57" [Wed May 15 19:42:38 2013] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.177 [Wed May 15 19:42:38 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.57" [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src1.ximg exists [Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src1.csv [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src1_1.ximg exists [Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src1.csv [Wed May 15 20:58:03 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src1.csv [Wed May 15 20:58:03 2013] fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Wed May 15 20:58:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src1.csv [Wed May 15 20:58:03 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13656_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 15 22:35:03 2013] Warning, spatial fit 1 centroid is now closest to src. 29 [Wed May 15 22:35:03 2013] Vigneting correction estimate = 1.000000 [Wed May 15 22:35:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 15 22:35:03 2013] Assessing source extent using major axis lower bound [Wed May 15 22:35:03 2013] Source does appear to be extended [Wed May 15 22:35:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.57 [Wed May 15 22:35:03 2013] Source is asymmetric [Wed May 15 23:32:25 2013] Writing source region out to fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1_src.reg [Wed May 15 23:32:25 2013] Extracting stamp from image fullrun_ccd2_acisf13656_pi14-548_cl_sm2.00.img.gz, (318, 781) - (500, 963) [Wed May 15 23:32:25 2013] Writing fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1.gif [Wed May 15 23:32:28 2013] Size of ../../acisf13656/products/events/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2051 counts [Wed May 15 23:32:28 2013] Mean chipx,y = (248.69, 327.90) [Wed May 15 23:32:28 2013] Mean tdetx,y = (3388.90, 3837.31) [Wed May 15 23:32:28 2013] chipx,y range = (224.00-275.00, 298.00-359.00) [Wed May 15 23:32:28 2013] Size of ../../acisf13656/products/events/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 359 counts [Wed May 15 23:32:29 2013] rmf not found, will run specextract [Wed May 15 23:32:29 2013] arf not found, will run specextract [Wed May 15 23:32:58 2013] ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1.warf not found [Wed May 15 23:32:58 2013] ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1.wrmf not found [Wed May 15 23:32:58 2013] Removal of ../../acisf13656/products/spectra/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1.soff failed [Thu May 16 00:08:13 2013] Keeping rmf generated by specextract [Thu May 16 00:08:13 2013] 169.157 [Thu May 16 01:05:08 2013] Updating aperture counts using extracted products [Thu May 16 01:05:08 2013] Total counts from fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1_src.pi.gz = 2051.00 [Thu May 16 01:05:08 2013] Total counts from fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1_bgd.pi.gz = 359.00 [Thu May 16 01:05:08 2013] Got source and background scale factors 0.000007, 0.000138 [Thu May 16 01:05:08 2013] User source parameters: Position = (409.1, 872.0) = 5 52 4.05 32 39 24.7 Extent = 2.0 (1.9-2.1)" x 1.2 (1.1-1.2)", rotation angle = 73 (71-77) degrees Source aperture counts = 2032.6 +/- 46.3 Background aperture counts = 18.4 Rate = 0.01 +/- 0.0003 [Thu May 16 01:05:16 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 16 01:05:16 2013] Using photon index=1.80, rate=0.0115, arf fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1.arf [Thu May 16 01:05:16 2013] Assuming count rate is from the 0.20-8.00 bandpass [Thu May 16 01:05:16 2013] Updating source flux to 1.6e-13 [Thu May 16 01:06:21 2013] Reading fit data from acisf13656/analysis//spectral/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1_pl.csv [Thu May 16 01:06:21 2013] Spectral fit parameter nH value = 4.37397e+21 [Thu May 16 01:06:21 2013] Spectral fit parameter PhoIndex value = 1.88368 [Thu May 16 01:06:21 2013] Failed to get F(0.3-8.0) from acisf13656/analysis//spectral/fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Thu May 16 01:06:21 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 16 01:06:21 2013] Using Nh = 4.4e+21, photon index=1.88, rate=0.0115, arf fullrun_ccd2_acisf13656_pi14-548_pass1_cl_src1.arf [Thu May 16 01:06:21 2013] Assuming count rate is from the 0.20-8.00 bandpass [Thu May 16 01:06:21 2013] Updating source flux to 1.6e-13