[Fri May 10 22:37:33 2013] Detection parameters:
  Position = (1253.3, 702.9) = 8 19 47.52 38 32 28.2
  Extent = 0.8" x 0.6", rotation angle = 37 degrees
  Source counts = 17.5 +/- 4.4
  Background counts = 1.5
  Rate = 0.0006 +/- 0.0001

[Fri May 10 22:37:33 2013] Off-axis axis estimate = 3.81'
[Fri May 10 23:18:06 2013] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Fri May 10 23:18:06 2013] Initial guess for spatial extent in simple fitting = 0.78"
[Fri May 10 23:18:06 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.927
[Fri May 10 23:18:06 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 0.78"
[Fri May 10 23:40:03 2013] fullrun_ccd7_acisf13642_pi14-548_cl_pass0_src10.ximg exists
[Fri May 10 23:40:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13642_pi14-548_cl_pass0_src10.csv
[Fri May 10 23:40:03 2013] fullrun_ccd7_acisf13642_pi14-548_cl_pass0_src10_1.ximg exists
[Fri May 10 23:40:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13642_pi14-548_cl_pass0_src10.csv
[Fri May 10 23:40:03 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13642_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13642_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 23:40:04 2013] fullrun_ccd7_acisf13642_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri May 10 23:40:04 2013] fullrun_ccd7_acisf13642_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 10 23:40:04 2013] Fit fullrun_ccd7_acisf13642_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri May 10 23:40:10 2013] Spatial fit model total counts = 19.597600, observed total counts = 21.000000
[Fri May 10 23:40:10 2013] Offset between fit and detection position for source 18 = 0.842795 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.842795 pixels
  Position = (1253.9, 703.5) = 8 19 47.52 38 32 28.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 18.9 +/- 4.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri May 10 23:40:10 2013] Vigneting correction estimate = 1.000000
[Fri May 10 23:40:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 23:40:10 2013] Assessing source extent using major axis lower bound
[Fri May 10 23:40:10 2013] Source does appear to be extended
[Fri May 10 23:40:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:22:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 00:22:01 2013] Initial guess for spatial extent in simple fitting = 0.91"
[Sat May 11 00:22:01 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Sat May 11 00:22:01 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 0.91"
[Sat May 11 00:44:04 2013] fullrun_ccd7_acisf13642_pi14-548_cl_pass1_src10.ximg exists
[Sat May 11 00:44:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13642_pi14-548_cl_pass1_src10.csv
[Sat May 11 00:44:04 2013] fullrun_ccd7_acisf13642_pi14-548_cl_pass1_src10_1.ximg exists
[Sat May 11 00:44:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13642_pi14-548_cl_pass1_src10.csv
[Sat May 11 00:44:04 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13642_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13642_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 00:44:05 2013] fullrun_ccd7_acisf13642_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat May 11 00:44:05 2013] fullrun_ccd7_acisf13642_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May 11 00:44:05 2013] Fit fullrun_ccd7_acisf13642_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat May 11 00:44:11 2013] Spatial fit model total counts = 20.057800, observed total counts = 21.000000
[Sat May 11 00:44:11 2013] Offset between fit and detection position for source 18 = 0.055272 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.055272 pixels
  Position = (1254.0, 703.5) = 8 19 47.52 38 32 28.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 19.3 +/- 4.4
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sat May 11 00:44:11 2013] Vigneting correction estimate = 1.000000
[Sat May 11 00:44:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 00:44:11 2013] Assessing source extent using major axis lower bound
[Sat May 11 00:44:11 2013] Source does appear to be extended
[Sat May 11 00:44:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 00:52:54 2013] Writing source region out to fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18_src.reg
[Sat May 11 00:52:54 2013] Extracting stamp from image fullrun_ccd7_acisf13642_pi14-548_cl_sm2.00.img.gz, (1213, 662) - (1295, 745)
[Sat May 11 00:52:54 2013] Writing fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18.gif
[Sat May 11 00:55:33 2013] Size of ../../acisf13642/products/events/fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18_src.evt.gz[events] = 19 counts
[Sat May 11 00:55:33 2013] Mean chipx,y = (231.32, 41.00)
[Sat May 11 00:55:33 2013] Mean tdetx,y = (4148.32, 1743.00)
[Sat May 11 00:55:33 2013] chipx,y range = (215.00-253.00, 26.00-54.00)
[Sat May 11 00:55:33 2013] Size of ../../acisf13642/products/events/fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 31 counts
[Sat May 11 00:55:34 2013] Not generating rmf since there are only 19 counts
[Sat May 11 00:55:34 2013] arf not found, will run specextract
[Sat May 11 00:55:42 2013] ../../acisf13642/products/spectra/fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18.warf not found
[Sat May 11 00:55:42 2013] ../../acisf13642/products/spectra/fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18.wrmf not found
[Sat May 11 00:55:42 2013] Removal of ../../acisf13642/products/spectra/fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18.soff failed
[Sat May 11 00:59:58 2013] Spectrum 18 has only 19 counts, deleting rmf
[Sat May 11 00:59:58 2013] 214.027
[Sat May 11 01:00:04 2013] Updating aperture counts using extracted products
[Sat May 11 01:00:04 2013] Total counts from fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18_src.pi.gz = 19.00
[Sat May 11 01:00:04 2013] Total counts from fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18_bgd.pi.gz = 31.00
[Sat May 11 01:00:04 2013] Got source and background scale factors 0.000003, 0.000030
[Sat May 11 01:00:04 2013] User source parameters:
  Position = (1254.0, 703.5) = 8 19 47.52 38 32 28.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source aperture counts = 16.4 +/- 5.4
  Background aperture counts = 2.6
  Rate = 0.0006 +/- 0.0002

[Sat May 11 01:00:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 01:00:06 2013] Using photon index=1.80, rate=0.000651, arf fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18.arf
[Sat May 11 01:00:06 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 11 01:00:06 2013] Updating source flux to 6.1e-15
[Sat May 11 01:00:14 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 11 01:00:15 2013] acisf13642/analysis//spectral/fullrun_ccd7_acisf13642_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete