[Thu Jul 25 06:09:38 2013] Detection parameters:
  Position = (526.8, 1005.5) = 17 12 21.75 -38 33 39.5
  Extent = 1.0" x 0.5", rotation angle = 109 degrees
  Source counts = 10.2 +/- 3.3
  Background counts = 0.8
  Rate = 0.0002 +/- 7e-05

[Thu Jul 25 06:09:38 2013] Off-axis axis estimate = 3.85'
[Thu Jul 25 06:13:40 2013] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 06:13:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 25 06:13:40 2013] Initial guess for spatial extent in simple fitting = 0.79"
[Thu Jul 25 06:13:40 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.133
[Thu Jul 25 06:13:40 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.79"
[Thu Jul 25 06:26:33 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src7.ximg exists
[Thu Jul 25 06:26:33 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src7_1.ximg exists
[Thu Jul 25 06:26:33 2013] Fit fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src7 appears to have run properly
[Thu Jul 25 06:26:33 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Thu Jul 25 06:26:33 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jul 25 06:26:33 2013] Fit fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Jul 25 08:40:44 2013] Spatial fit model total counts = 15.544700, observed total counts = 15.000000
[Thu Jul 25 08:40:44 2013] Offset between fit and detection position for source 9 = 0.703302 pixels
[Thu Jul 25 08:40:44 2013] 15.628750 total counts/ 4.592950 bgd. counts: snr = 5.149416
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.703302 pixels
  Position = (527.3, 1006.0) = 17 12 21.75 -38 33 39.5
  Extent = 1.3 (0.9-1.6)" x 0.3 (0.2-0.4)", rotation angle = 71 (63-80) degrees
  Source counts = 11.0 +/- 4.0
  Background counts = 4.6
  Rate = 0.0002 +/- 8e-05
[Thu Jul 25 08:40:44 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 08:40:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 08:40:44 2013] Assessing source extent using major axis lower bound
[Thu Jul 25 08:40:44 2013] Source does appear to be extended
[Thu Jul 25 08:40:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.33
[Thu Jul 25 08:40:44 2013] Source is asymmetric
[Thu Jul 25 08:41:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 25 08:41:15 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 25 08:41:15 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Thu Jul 25 08:41:15 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Thu Jul 25 08:41:15 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 0.76"
[Thu Jul 25 08:52:20 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src7.ximg exists
[Thu Jul 25 08:52:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src7.csv
[Thu Jul 25 08:52:20 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src7_1.ximg exists
[Thu Jul 25 08:52:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src7.csv
[Thu Jul 25 08:52:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 08:52:20 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Thu Jul 25 08:52:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src7.csv
[Thu Jul 25 08:52:20 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jul 25 08:52:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src7.csv
[Thu Jul 25 08:52:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 10:53:00 2013] Spatial fit model total counts = 11.610200, observed total counts = 15.000000
[Thu Jul 25 10:53:00 2013] Offset between fit and detection position for source 9 = 0.033327 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.033327 pixels
  Position = (527.3, 1006.0) = 17 12 21.75 -38 33 39.6
  Extent = 1.3 (0.9-1.5)" x 0.3 (0.2-0.4)", rotation angle = 72 (64-79) degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Thu Jul 25 10:53:00 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 10:53:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 10:53:00 2013] Assessing source extent using major axis lower bound
[Thu Jul 25 10:53:00 2013] Source does appear to be extended
[Thu Jul 25 10:53:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.59
[Thu Jul 25 10:53:00 2013] Source is asymmetric
[Thu Jul 25 10:53:33 2013] Writing source region out to fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9_src.reg
[Thu Jul 25 10:53:33 2013] Extracting stamp from image fullrun_ccd0_acisf13621_pi14-548_cl_sm2.00.img.gz, (468, 947) - (587, 1065)
[Thu Jul 25 10:53:33 2013] Writing fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9.gif
[Thu Jul 25 10:57:24 2013] Size of ../../acisf13621/products/events/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9_src.evt.gz[events] = 8 counts
[Thu Jul 25 10:57:24 2013] Mean chipx,y = (834.12, 674.38)
[Thu Jul 25 10:57:24 2013] Mean tdetx,y = (3735.38, 4297.88)
[Thu Jul 25 10:57:24 2013] chipx,y range = (818.00-850.00, 658.00-688.00)
[Thu Jul 25 10:57:24 2013] Size of ../../acisf13621/products/events/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 48 counts
[Thu Jul 25 10:57:25 2013] Not generating rmf since there are only 10 counts
[Thu Jul 25 10:57:25 2013] arf not found, will run specextract
[Thu Jul 25 10:57:49 2013] ../../acisf13621/products/spectra/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9.warf not found
[Thu Jul 25 10:57:49 2013] ../../acisf13621/products/spectra/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9.wrmf not found
[Thu Jul 25 10:57:49 2013] Removal of ../../acisf13621/products/spectra/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9.soff failed
[Thu Jul 25 11:00:46 2013] Spectrum 9 has only 11 counts, deleting rmf
[Thu Jul 25 11:00:46 2013] 191.856
[Thu Jul 25 12:25:51 2013] Updating aperture counts using extracted products
[Thu Jul 25 12:25:51 2013] Total counts from fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9_src.pi.gz = 8.00
[Thu Jul 25 12:25:51 2013] Total counts from fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9_bgd.pi.gz = 48.00
[Thu Jul 25 12:25:51 2013] Got source and background scale factors 0.000001, 0.000061
[Thu Jul 25 12:25:51 2013] User source parameters:
  Position = (527.3, 1006.0) = 17 12 21.75 -38 33 39.6
  Extent = 1.3 (0.9-1.5)" x 0.3 (0.2-0.4)", rotation angle = 72 (64-79) degrees
  Source aperture counts = 7.2 +/- 4.0
  Background aperture counts = 0.8
  Rate = 0.0001 +/- 8e-05

[Thu Jul 25 12:25:52 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 25 12:25:52 2013] Using photon index=1.80, rate=0.00022, arf fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9.arf
[Thu Jul 25 12:25:52 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 25 12:25:52 2013] Updating source flux to 3.6e-15
[Thu Jul 25 12:26:16 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul 25 12:26:17 2013] acisf13621/analysis//spectral/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete