[Thu Jul 25 06:09:38 2013] Detection parameters:
  Position = (641.8, 1307.4) = 17 12 16.93 -38 31 11.0
  Extent = 0.5" x 0.5", rotation angle = 134 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0002 +/- 7e-05

[Thu Jul 25 06:09:38 2013] Off-axis axis estimate = 1.78'
[Thu Jul 25 06:13:40 2013] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Jul 25 06:13:40 2013] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Jul 25 06:13:40 2013] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.264
[Thu Jul 25 06:13:40 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 0.41"
[Thu Jul 25 06:26:33 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src4.ximg exists
[Thu Jul 25 06:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src4.csv
[Thu Jul 25 06:26:33 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Jul 25 06:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src4.csv
[Thu Jul 25 06:26:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13621_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 06:26:33 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Jul 25 06:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src4.csv
[Thu Jul 25 06:26:33 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jul 25 06:26:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src4.csv
[Thu Jul 25 06:26:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13621_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 08:40:44 2013] Spatial fit model total counts = 11.455100, observed total counts = 13.000000
[Thu Jul 25 08:40:44 2013] Offset between fit and detection position for source 6 = 0.697518 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.697518 pixels
  Position = (642.3, 1307.9) = 17 12 16.93 -38 31 11.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 11.9 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Thu Jul 25 08:40:44 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 08:40:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 08:40:44 2013] Assessing source extent using major axis lower bound
[Thu Jul 25 08:40:44 2013] Source does appear to be extended
[Thu Jul 25 08:40:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 25 08:41:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 25 08:41:15 2013] Initial guess for spatial extent in simple fitting = 0.48"
[Thu Jul 25 08:41:15 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.044
[Thu Jul 25 08:41:15 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 0.48"
[Thu Jul 25 08:52:20 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src4.ximg exists
[Thu Jul 25 08:52:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src4.csv
[Thu Jul 25 08:52:20 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Jul 25 08:52:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src4.csv
[Thu Jul 25 08:52:20 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13621_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 25 08:52:20 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul 25 08:52:20 2013] fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul 25 08:52:20 2013] Fit fullrun_ccd0_acisf13621_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jul 25 10:53:00 2013] Spatial fit model total counts = 12.146700, observed total counts = 13.000000
[Thu Jul 25 10:53:00 2013] Offset between fit and detection position for source 6 = 0.047081 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.047081 pixels
  Position = (642.4, 1307.9) = 17 12 16.93 -38 31 11.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 12.9 +/- 3.6
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Thu Jul 25 10:53:00 2013] Vigneting correction estimate = 1.000000
[Thu Jul 25 10:53:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 25 10:53:00 2013] Assessing source extent using major axis lower bound
[Thu Jul 25 10:53:00 2013] Source does appear to be extended
[Thu Jul 25 10:53:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 25 10:53:33 2013] Writing source region out to fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6_src.reg
[Thu Jul 25 10:53:33 2013] Extracting stamp from image fullrun_ccd0_acisf13621_pi14-548_cl_sm2.00.img.gz, (621, 1287) - (663, 1329)
[Thu Jul 25 10:53:33 2013] Writing fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6.gif
[Thu Jul 25 10:55:36 2013] Size of ../../acisf13621/products/events/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6_src.evt.gz[events] = 12 counts
[Thu Jul 25 10:55:36 2013] Mean chipx,y = (908.92, 988.92)
[Thu Jul 25 10:55:36 2013] Mean tdetx,y = (4049.92, 4223.08)
[Thu Jul 25 10:55:36 2013] chipx,y range = (893.00-926.00, 970.00-1007.00)
[Thu Jul 25 10:55:36 2013] Size of ../../acisf13621/products/events/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 7 counts
[Thu Jul 25 10:55:37 2013] Not generating rmf since there are only 12 counts
[Thu Jul 25 10:55:37 2013] arf not found, will run specextract
[Thu Jul 25 10:56:04 2013] ../../acisf13621/products/spectra/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6.warf not found
[Thu Jul 25 10:56:04 2013] ../../acisf13621/products/spectra/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6.wrmf not found
[Thu Jul 25 10:56:04 2013] Removal of ../../acisf13621/products/spectra/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6.soff failed
[Thu Jul 25 11:00:46 2013] Spectrum 6 has only 13 counts, deleting rmf
[Thu Jul 25 11:00:46 2013] 196.747
[Thu Jul 25 12:25:51 2013] Updating aperture counts using extracted products
[Thu Jul 25 12:25:51 2013] Total counts from fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6_src.pi.gz = 12.00
[Thu Jul 25 12:25:51 2013] Total counts from fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6_bgd.pi.gz = 7.00
[Thu Jul 25 12:25:51 2013] Got source and background scale factors 0.000001, 0.000008
[Thu Jul 25 12:25:51 2013] User source parameters:
  Position = (642.4, 1307.9) = 17 12 16.93 -38 31 11.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source aperture counts = 11.4 +/- 4.6
  Background aperture counts = 0.6
  Rate = 0.0002 +/- 9e-05

[Thu Jul 25 12:25:52 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul 25 12:25:52 2013] Using photon index=1.80, rate=0.000262, arf fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6.arf
[Thu Jul 25 12:25:52 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jul 25 12:25:52 2013] Updating source flux to 4.2e-15
[Thu Jul 25 12:26:16 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul 25 12:26:17 2013] acisf13621/analysis//spectral/fullrun_ccd0_acisf13621_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete