[Fri Aug 14 08:25:39 2015] Detection parameters:
  Position = (798.2, 852.9) = 18 56 30.49 -37 16 32.4
  Extent = 0.5" x 0.5", rotation angle = 46 degrees
  Source counts = 11.6 +/- 3.5
  Background counts = 0.4
  Rate = 0.001 +/- 0.0003

[Fri Aug 14 08:25:40 2015] Off-axis axis estimate = 4.63'
[Fri Aug 14 08:27:23 2015] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 08:27:23 2015] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 14 08:27:23 2015] Initial guess for spatial extent in simple fitting = 1.04"
[Fri Aug 14 08:27:23 2015] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.100
[Fri Aug 14 08:27:23 2015] Giving source the simple spatial ID 9 for pass 0, mean size = 1.04"
[Fri Aug 14 08:32:05 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src9.ximg exists
[Fri Aug 14 08:32:05 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src9_1.ximg exists
[Fri Aug 14 08:32:05 2015] Fit fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src9 appears to have run properly
[Fri Aug 14 08:32:05 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Fri Aug 14 08:32:05 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Aug 14 08:32:05 2015] Fit fullrun_ccd7_acisf13619_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Aug 14 08:32:08 2015] Spatial fit model total counts = 21.034100, observed total counts = 22.000000
[Fri Aug 14 08:32:08 2015] Offset between fit and detection position for source 9 = 2.238119 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.238119 pixels
  Position = (800.3, 852.4) = 18 56 30.41 -37 16 33.0
  Extent = 1.3 (0.9-1.8)" x 0.7 (0.5-0.9)", rotation angle = 338 (317-3) degrees
  Source counts = 21.1 +/- 4.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri Aug 14 08:32:08 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 08:32:08 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 08:32:08 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 08:32:08 2015] Source does appear to be extended
[Fri Aug 14 08:32:08 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Fri Aug 14 08:33:18 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 08:33:18 2015] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 14 08:33:18 2015] Initial guess for spatial extent in simple fitting = 1.00"
[Fri Aug 14 08:33:18 2015] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.977
[Fri Aug 14 08:33:18 2015] Giving source the simple spatial ID 9 for pass 1, mean size = 1.00"
[Fri Aug 14 08:38:56 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src9.ximg exists
[Fri Aug 14 08:38:56 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src9.csv
[Fri Aug 14 08:38:56 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src9_1.ximg exists
[Fri Aug 14 08:38:56 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src9.csv
[Fri Aug 14 08:38:56 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:38:56 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 14 08:38:56 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri Aug 14 08:38:56 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 14 08:38:56 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src9.csv
[Fri Aug 14 08:38:56 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:38:59 2015] Spatial fit model total counts = 18.169500, observed total counts = 22.000000
[Fri Aug 14 08:38:59 2015] Offset between fit and detection position for source 9 = 1.001408 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.001408 pixels
  Position = (799.4, 852.7) = 18 56 30.45 -37 16 32.8
  Extent = 0.9 (0.7-1.5)" x 0.6 (0.5-0.9)", rotation angle = 140 (281-79) degrees
  Source counts = 19.3 +/- 4.4
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri Aug 14 08:38:59 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 08:38:59 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 08:38:59 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 08:38:59 2015] Source does appear to be extended
[Fri Aug 14 08:38:59 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76