[Fri Aug 14 08:25:39 2015] Detection parameters:
  Position = (555.9, 358.9) = 18 56 40.48 -37 20 35.5
  Extent = 0.5" x 0.5", rotation angle = 38 degrees
  Source counts = 20.7 +/- 4.6
  Background counts = 0.3
  Rate = 0.002 +/- 0.0004

[Fri Aug 14 08:25:40 2015] Off-axis axis estimate = 0.18'
[Fri Aug 14 08:27:23 2015] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 08:27:23 2015] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Aug 14 08:27:23 2015] source mask rpix=0.8, npix_max = 7, mask sum = 4, frac = 0.557
[Fri Aug 14 08:27:23 2015] Giving source the simple spatial ID 6 for pass 0, mean size = 0.41"
[Fri Aug 14 08:32:05 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src6.ximg exists
[Fri Aug 14 08:32:05 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src6.csv
[Fri Aug 14 08:32:05 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Aug 14 08:32:05 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src6.csv
[Fri Aug 14 08:32:05 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13619_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:32:05 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Aug 14 08:32:05 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Aug 14 08:32:05 2015] Fit fullrun_ccd7_acisf13619_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Aug 14 08:32:08 2015] Spatial fit model total counts = 19.513600, observed total counts = 22.000000
[Fri Aug 14 08:32:08 2015] Offset between fit and detection position for source 6 = 0.696495 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.696495 pixels
  Position = (556.4, 359.4) = 18 56 40.48 -37 20 35.5
  Extent = 0.4 (0.3-0.6)" x 0.3 (0.2-0.3)", rotation angle = 38 (10-69) degrees
  Source counts = 20.0 +/- 4.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri Aug 14 08:32:08 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 08:32:08 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 08:32:08 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 08:32:08 2015] Source does appear to be extended
[Fri Aug 14 08:32:08 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Fri Aug 14 08:33:18 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 08:33:18 2015] Initial guess for spatial extent in simple fitting = 0.33"
[Fri Aug 14 08:33:18 2015] source mask rpix=0.7, npix_max = 5, mask sum = 9, frac = 1.623
[Fri Aug 14 08:33:18 2015] Giving source the simple spatial ID 6 for pass 1, mean size = 0.33"
[Fri Aug 14 08:38:56 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src6.ximg exists
[Fri Aug 14 08:38:56 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Aug 14 08:38:56 2015] Fit fullrun_ccd7_acisf13619_pi14-548_cl_pass1_src6 appears to have run properly
[Fri Aug 14 08:38:56 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Aug 14 08:38:56 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src6.csv
[Fri Aug 14 08:38:56 2015] fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Aug 14 08:38:56 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src6.csv
[Fri Aug 14 08:38:56 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13619_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:38:59 2015] Spatial fit model total counts = 20.448100, observed total counts = 22.000000
[Fri Aug 14 08:38:59 2015] Offset between fit and detection position for source 6 = 0.004730 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.004730 pixels
  Position = (556.4, 359.4) = 18 56 40.48 -37 20 35.5
  Extent = 0.4 (0.3-0.5)" x 0.3 (0.2-0.4)", rotation angle = 40 (10-68) degrees
  Source counts = 20.8 +/- 4.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Fri Aug 14 08:38:59 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 08:38:59 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 08:38:59 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 08:38:59 2015] Source does appear to be extended
[Fri Aug 14 08:38:59 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89