[Fri Aug 14 08:25:04 2015] Detection parameters:
  Position = (840.1, 733.1) = 18 56 42.86 -37 25 25.2
  Extent = 0.7" x 0.5", rotation angle = 36 degrees
  Source counts = 13.7 +/- 3.7
  Background counts = 0.3
  Rate = 0.001 +/- 0.0003

[Fri Aug 14 08:25:04 2015] Off-axis axis estimate = 4.80'
[Fri Aug 14 08:26:43 2015] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 08:26:43 2015] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 14 08:26:43 2015] Initial guess for spatial extent in simple fitting = 1.10"
[Fri Aug 14 08:26:43 2015] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.201
[Fri Aug 14 08:26:43 2015] Giving source the simple spatial ID 1 for pass 0, mean size = 1.10"
[Fri Aug 14 08:27:23 2015] fullrun_ccd6_acisf13619_pi14-548_cl_pass0_src1.ximg exists
[Fri Aug 14 08:27:23 2015] fullrun_ccd6_acisf13619_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Aug 14 08:27:23 2015] Fit fullrun_ccd6_acisf13619_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Aug 14 08:27:23 2015] fullrun_ccd6_acisf13619_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 14 08:27:23 2015] fullrun_ccd6_acisf13619_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 14 08:27:23 2015] Fit fullrun_ccd6_acisf13619_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 14 08:32:07 2015] Spatial fit model total counts = 23.368000, observed total counts = 24.000000
[Fri Aug 14 08:32:07 2015] Offset between fit and detection position for source 8 = 0.926272 pixels
[Fri Aug 14 08:32:07 2015] 23.714500 total counts/ 13.460500 bgd. counts: snr = 2.794877
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.926272 pixels
  Position = (840.8, 733.7) = 18 56 42.86 -37 25 25.1
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 10.3 +/- 4.9
  Background counts = 13.5
  Rate = 0.0009 +/- 0.0004
[Fri Aug 14 08:32:07 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 08:32:07 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 08:32:07 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 08:32:07 2015] Source does appear to be extended
[Fri Aug 14 08:32:07 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 14 08:32:16 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 08:32:16 2015] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Aug 14 08:32:16 2015] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.103
[Fri Aug 14 08:32:16 2015] Giving source the simple spatial ID 1 for pass 1, mean size = 0.46"
[Fri Aug 14 08:33:18 2015] fullrun_ccd6_acisf13619_pi14-548_cl_pass1_src1.ximg exists
[Fri Aug 14 08:33:18 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13619_pi14-548_cl_pass1_src1.csv
[Fri Aug 14 08:33:18 2015] fullrun_ccd6_acisf13619_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Aug 14 08:33:18 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13619_pi14-548_cl_pass1_src1.csv
[Fri Aug 14 08:33:18 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13619_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13619_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:33:18 2015] fullrun_ccd6_acisf13619_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 14 08:33:18 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13619_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Aug 14 08:33:18 2015] fullrun_ccd6_acisf13619_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 14 08:33:18 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13619_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Aug 14 08:33:18 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13619_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13619_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 08:38:58 2015] Spatial fit model total counts = 17.990300, observed total counts = 24.000000
[Fri Aug 14 08:38:58 2015] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 14 08:38:58 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 08:38:58 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 08:38:58 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 08:38:58 2015] Source does appear to be extended
[Fri Aug 14 08:38:58 2015] Computing asymmetry using major and minor axis, asym = 1.00