[Wed May 15 01:45:45 2013] Detection parameters:
  Position = (349.5, 306.4) = 5 59 32.45 37 15 44.0
  Extent = 0.5" x 0.5", rotation angle = 86 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.001 +/- 0.0003

[Wed May 15 01:45:45 2013] Off-axis axis estimate = 3.57'
[Wed May 15 01:47:03 2013] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Wed May 15 01:47:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 01:47:03 2013] Initial guess for spatial extent in simple fitting = 0.71"
[Wed May 15 01:47:03 2013] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.796
[Wed May 15 01:47:03 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.71"
[Wed May 15 01:49:37 2013] fullrun_ccd6_acisf13617_pi14-548_cl_pass0_src1.ximg exists
[Wed May 15 01:49:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13617_pi14-548_cl_pass0_src1.csv
[Wed May 15 01:49:37 2013] fullrun_ccd6_acisf13617_pi14-548_cl_pass0_src1_1.ximg exists
[Wed May 15 01:49:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13617_pi14-548_cl_pass0_src1.csv
[Wed May 15 01:49:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13617_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13617_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 01:49:37 2013] fullrun_ccd6_acisf13617_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed May 15 01:49:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13617_pi14-548_cl_pass0_tfrozen_src1.csv
[Wed May 15 01:49:37 2013] fullrun_ccd6_acisf13617_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 15 01:49:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf13617_pi14-548_cl_pass0_tfrozen_src1.csv
[Wed May 15 01:49:37 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf13617_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf13617_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 01:50:51 2013] Spatial fit model total counts = 11.089000, observed total counts = 13.000000
[Wed May 15 01:50:51 2013] Offset between fit and detection position for source 1 = 0.745275 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.745275 pixels
  Position = (350.0, 307.0) = 5 59 32.45 37 15 44.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 10.5 +/- 3.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May 15 01:50:51 2013] Vigneting correction estimate = 1.000000
[Wed May 15 01:50:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 01:50:51 2013] Assessing source extent using major axis lower bound
[Wed May 15 01:50:51 2013] Source does appear to be extended
[Wed May 15 01:50:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 01:51:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 15 01:51:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 01:51:00 2013] Initial guess for spatial extent in simple fitting = 0.60"
[Wed May 15 01:51:00 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.339
[Wed May 15 01:51:00 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.60"
[Wed May 15 01:53:56 2013] fullrun_ccd6_acisf13617_pi14-548_cl_pass1_src1.ximg exists
[Wed May 15 01:53:56 2013] fullrun_ccd6_acisf13617_pi14-548_cl_pass1_src1_1.ximg exists
[Wed May 15 01:53:56 2013] Fit fullrun_ccd6_acisf13617_pi14-548_cl_pass1_src1 appears to have run properly
[Wed May 15 01:53:56 2013] fullrun_ccd6_acisf13617_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed May 15 01:53:56 2013] fullrun_ccd6_acisf13617_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 15 01:53:56 2013] Fit fullrun_ccd6_acisf13617_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 15 01:55:14 2013] Spatial fit model total counts = 11.551300, observed total counts = 12.000000
[Wed May 15 01:55:14 2013] Offset between fit and detection position for source 1 = 0.036046 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.036046 pixels
  Position = (350.0, 307.0) = 5 59 32.45 37 15 44.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May 15 01:55:14 2013] Vigneting correction estimate = 1.000000
[Wed May 15 01:55:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 01:55:14 2013] Assessing source extent using major axis lower bound
[Wed May 15 01:55:14 2013] Source does appear to be extended
[Wed May 15 01:55:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 01:55:21 2013] Writing source region out to fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1_src.reg
[Wed May 15 01:55:21 2013] Extracting stamp from image fullrun_ccd6_acisf13617_pi14-548_cl_sm2.00.img.gz, (324, 281) - (376, 333)
[Wed May 15 01:55:21 2013] Writing fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1.gif
[Wed May 15 01:55:22 2013] Size of ../../acisf13617/products/events/fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1_src.evt.gz[events] = 11 counts
[Wed May 15 01:55:22 2013] Mean chipx,y = (803.00, 495.00)
[Wed May 15 01:55:22 2013] Mean tdetx,y = (3678.00, 2197.00)
[Wed May 15 01:55:22 2013] chipx,y range = (791.00-822.00, 479.00-511.00)
[Wed May 15 01:55:22 2013] Size of ../../acisf13617/products/events/fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4 counts
[Wed May 15 01:55:24 2013] Not generating rmf since there are only 11 counts
[Wed May 15 01:55:24 2013] arf not found, will run specextract
[Wed May 15 01:55:50 2013] ../../acisf13617/products/spectra/fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1.warf not found
[Wed May 15 01:55:50 2013] ../../acisf13617/products/spectra/fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1.wrmf not found
[Wed May 15 01:55:50 2013] Removal of ../../acisf13617/products/spectra/fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1.soff failed
[Wed May 15 01:57:42 2013] Spectrum 1 has only 12 counts, deleting rmf
[Wed May 15 01:57:42 2013] 203.963
[Wed May 15 01:58:00 2013] Updating aperture counts using extracted products
[Wed May 15 01:58:00 2013] Total counts from fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1_src.pi.gz = 11.00
[Wed May 15 01:58:00 2013] Total counts from fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1_bgd.pi.gz = 4.00
[Wed May 15 01:58:00 2013] Got source and background scale factors 0.000001, 0.000012
[Wed May 15 01:58:00 2013] User source parameters:
  Position = (350.0, 307.0) = 5 59 32.45 37 15 44.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source aperture counts = 10.7 +/- 4.4
  Background aperture counts = 0.3
  Rate = 0.001 +/- 0.0005

[Wed May 15 01:58:01 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 01:58:01 2013] Using photon index=1.80, rate=0.00117, arf fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1.arf
[Wed May 15 01:58:01 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May 15 01:58:01 2013] Updating source flux to 1.3e-14
[Wed May 15 01:58:04 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 15 01:58:05 2013] acisf13617/analysis//spectral/fullrun_ccd6_acisf13617_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete