[Thu May 23 12:29:21 2013] Detection parameters:
  Position = (550.7, 305.9) = 19 31 17.36 49 35 35.7
  Extent = 2.4" x 1.3", rotation angle = 146 degrees
  Source counts = 28.0 +/- 6.2
  Background counts = 10.0
  Rate = 0.001 +/- 0.0003

[Thu May 23 12:29:21 2013] Off-axis axis estimate = 10.86'
[Thu May 23 12:33:38 2013] Using EEF radius (= 5.24 ")to estimate initial spatial extent for simple fitting
[Thu May 23 12:33:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 12:33:38 2013] Initial guess for spatial extent in simple fitting = 5.24"
[Thu May 23 12:33:38 2013] source mask rpix=10.7, npix_max = 497, mask sum = 484, frac = 0.973
[Thu May 23 12:33:38 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 5.24"
[Thu May 23 12:39:50 2013] fullrun_ccd3_acisf13612_pi14-548_cl_pass0_src1.ximg exists
[Thu May 23 12:39:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13612_pi14-548_cl_pass0_src1.csv
[Thu May 23 12:39:50 2013] fullrun_ccd3_acisf13612_pi14-548_cl_pass0_src1_1.ximg exists
[Thu May 23 12:39:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13612_pi14-548_cl_pass0_src1.csv
[Thu May 23 12:39:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13612_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13612_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 12:39:50 2013] fullrun_ccd3_acisf13612_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu May 23 12:39:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13612_pi14-548_cl_pass0_tfrozen_src1.csv
[Thu May 23 12:39:50 2013] fullrun_ccd3_acisf13612_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 23 12:39:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13612_pi14-548_cl_pass0_tfrozen_src1.csv
[Thu May 23 12:39:50 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13612_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13612_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 12:41:42 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 45.674317 pixels away
[Thu May 23 12:41:42 2013] Vigneting correction estimate = 1.000000
[Thu May 23 12:41:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 12:41:42 2013] Assessing source extent using major
[Thu May 23 12:41:42 2013] Source does appear to be extended
[Thu May 23 12:41:42 2013] Computing asymmetry using major and minor axis, asym = 1.81
[Thu May 23 12:41:42 2013] Source is asymmetric
[Thu May 23 12:44:51 2013] Using EEF radius (= 5.24 ")to estimate initial spatial extent for simple fitting
[Thu May 23 12:44:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 12:44:51 2013] Initial guess for spatial extent in simple fitting = 5.24"
[Thu May 23 12:44:51 2013] source mask rpix=10.7, npix_max = 497, mask sum = 484, frac = 0.973
[Thu May 23 12:44:51 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.24"
[Thu May 23 12:52:07 2013] fullrun_ccd3_acisf13612_pi14-548_cl_pass1_src1.ximg exists
[Thu May 23 12:52:07 2013] fullrun_ccd3_acisf13612_pi14-548_cl_pass1_src1_1.ximg exists
[Thu May 23 12:52:07 2013] Fit fullrun_ccd3_acisf13612_pi14-548_cl_pass1_src1 appears to have run properly
[Thu May 23 12:52:07 2013] fullrun_ccd3_acisf13612_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu May 23 12:52:07 2013] fullrun_ccd3_acisf13612_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 23 12:52:07 2013] Fit fullrun_ccd3_acisf13612_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 23 12:54:00 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 60.575855 pixels away
[Thu May 23 12:54:00 2013] Vigneting correction estimate = 1.000000
[Thu May 23 12:54:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 12:54:00 2013] Assessing source extent using major
[Thu May 23 12:54:00 2013] Source does appear to be extended
[Thu May 23 12:54:00 2013] Computing asymmetry using major and minor axis, asym = 1.81
[Thu May 23 12:54:00 2013] Source is asymmetric
[Thu May 23 12:54:41 2013] Writing source region out to fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1_src.reg
[Thu May 23 12:54:41 2013] Extracting stamp from image fullrun_ccd3_acisf13612_pi14-548_cl_sm2.00.img.gz, (441, 196) - (661, 416)
[Thu May 23 12:54:41 2013] Writing fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1.gif
[Thu May 23 12:54:42 2013] Size of ../../acisf13612/products/events/fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1_src.evt.gz[events] = 24 counts
[Thu May 23 12:54:42 2013] Mean chipx,y = (382.04, 543.25)
[Thu May 23 12:54:42 2013] Mean tdetx,y = (4588.75, 3443.04)
[Thu May 23 12:54:42 2013] chipx,y range = (361.00-402.00, 517.00-561.00)
[Thu May 23 12:54:42 2013] Size of ../../acisf13612/products/events/fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 58 counts
[Thu May 23 12:54:43 2013] Not generating rmf since there are only 27 counts
[Thu May 23 12:54:43 2013] arf not found, will run specextract
[Thu May 23 12:55:15 2013] ../../acisf13612/products/spectra/fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1.warf not found
[Thu May 23 12:55:15 2013] ../../acisf13612/products/spectra/fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1.wrmf not found
[Thu May 23 12:55:15 2013] Removal of ../../acisf13612/products/spectra/fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1.soff failed
[Thu May 23 12:55:21 2013] Spectrum 1 has only 28 counts, deleting rmf
[Thu May 23 12:55:21 2013] 163.584
[Thu May 23 12:56:00 2013] Updating aperture counts using extracted products
[Thu May 23 12:56:00 2013] Total counts from fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1_src.pi.gz = 24.00
[Thu May 23 12:56:00 2013] Total counts from fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1_bgd.pi.gz = 58.00
[Thu May 23 12:56:00 2013] Got source and background scale factors 0.000010, 0.000211
[Thu May 23 12:56:00 2013] User source parameters:
  Position = (550.7, 305.9) = 19 31 17.36 49 35 35.7
  Extent = 2.4" x 1.3", rotation angle = 146
  Source aperture counts = 21.3 +/- 6.0
  Background aperture counts = 2.7
  Rate = 0.0009 +/- 0.0003

[Thu May 23 12:56:00 2013] Updating counts from extracted products
[Thu May 23 12:56:00 2013] Set source signif. to 21.29/1.65 = 12.92
[Thu May 23 12:56:00 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 12:56:00 2013] Using photon index=1.80, rate=0.000899, arf fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1.arf
[Thu May 23 12:56:00 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 23 12:56:00 2013] Updating source flux to 1.2e-14
[Thu May 23 12:56:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 12:56:03 2013] acisf13612/analysis//spectral/fullrun_ccd3_acisf13612_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete