[Thu May  2 12:51:53 2013] Detection parameters:
  Position = (459.0, 687.4) = 10 48 15.63 -11 22 10.5
  Extent = 0.5" x 0.5", rotation angle = 41 degrees
  Source counts = 14.7 +/- 3.9
  Background counts = 0.3
  Rate = 0.001 +/- 0.0004

[Thu May  2 12:51:54 2013] Off-axis axis estimate = 2.35'
[Thu May  2 13:12:21 2013] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Thu May  2 13:12:21 2013] Initial guess for spatial extent in simple fitting = 0.47"
[Thu May  2 13:12:21 2013] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.706
[Thu May  2 13:12:21 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.47"
[Thu May  2 13:20:01 2013] fullrun_ccd7_acisf13603_pi14-548_cl_pass0_src5.ximg exists
[Thu May  2 13:20:01 2013] fullrun_ccd7_acisf13603_pi14-548_cl_pass0_src5_1.ximg exists
[Thu May  2 13:20:01 2013] Fit fullrun_ccd7_acisf13603_pi14-548_cl_pass0_src5 appears to have run properly
[Thu May  2 13:20:01 2013] fullrun_ccd7_acisf13603_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu May  2 13:20:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13603_pi14-548_cl_pass0_tfrozen_src5.csv
[Thu May  2 13:20:01 2013] fullrun_ccd7_acisf13603_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May  2 13:20:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13603_pi14-548_cl_pass0_tfrozen_src5.csv
[Thu May  2 13:20:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13603_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13603_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 13:20:04 2013] Spatial fit model total counts = 14.517100, observed total counts = 16.000000
[Thu May  2 13:20:04 2013] Offset between fit and detection position for source 3 = 0.727571 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.727571 pixels
  Position = (459.5, 687.9) = 10 48 15.63 -11 22 10.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 14.3 +/- 3.8
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Thu May  2 13:20:04 2013] Vigneting correction estimate = 1.000000
[Thu May  2 13:20:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 13:20:04 2013] Assessing source extent using major axis lower bound
[Thu May  2 13:20:04 2013] Source does appear to be extended
[Thu May  2 13:20:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 13:40:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 13:40:16 2013] Initial guess for spatial extent in simple fitting = 0.51"
[Thu May  2 13:40:16 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.960
[Thu May  2 13:40:16 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.51"
[Thu May  2 13:47:40 2013] fullrun_ccd7_acisf13603_pi14-548_cl_pass1_src5.ximg exists
[Thu May  2 13:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13603_pi14-548_cl_pass1_src5.csv
[Thu May  2 13:47:40 2013] fullrun_ccd7_acisf13603_pi14-548_cl_pass1_src5_1.ximg exists
[Thu May  2 13:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13603_pi14-548_cl_pass1_src5.csv
[Thu May  2 13:47:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13603_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13603_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 13:47:40 2013] fullrun_ccd7_acisf13603_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu May  2 13:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13603_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu May  2 13:47:40 2013] fullrun_ccd7_acisf13603_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May  2 13:47:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13603_pi14-548_cl_pass1_tfrozen_src5.csv
[Thu May  2 13:47:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13603_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13603_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 13:47:43 2013] Spatial fit model total counts = 14.194900, observed total counts = 16.000000
[Thu May  2 13:47:43 2013] Offset between fit and detection position for source 3 = 0.048374 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.048374 pixels
  Position = (459.5, 687.8) = 10 48 15.63 -11 22 10.6
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source counts = 14.0 +/- 3.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Thu May  2 13:47:43 2013] Vigneting correction estimate = 1.000000
[Thu May  2 13:47:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 13:47:43 2013] Assessing source extent using major axis lower bound
[Thu May  2 13:47:43 2013] Source does appear to be extended
[Thu May  2 13:47:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 13:50:11 2013] Writing source region out to fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3_src.reg
[Thu May  2 13:50:11 2013] Extracting stamp from image fullrun_ccd7_acisf13603_pi14-548_cl_sm2.00.img.gz, (434, 662) - (485, 713)
[Thu May  2 13:50:11 2013] Writing fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3.gif
[Thu May  2 13:51:19 2013] Size of ../../acisf13603/products/events/fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3_src.evt.gz[events] = 15 counts
[Thu May  2 13:51:19 2013] Mean chipx,y = (398.67, 701.87)
[Thu May  2 13:51:19 2013] Mean tdetx,y = (4315.67, 2403.87)
[Thu May  2 13:51:19 2013] chipx,y range = (380.00-413.00, 685.00-720.00)
[Thu May  2 13:51:19 2013] Size of ../../acisf13603/products/events/fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 3 counts
[Thu May  2 13:51:20 2013] Not generating rmf since there are only 13 counts
[Thu May  2 13:51:20 2013] arf not found, will run specextract
[Thu May  2 13:51:27 2013] ../../acisf13603/products/spectra/fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3.warf not found
[Thu May  2 13:51:27 2013] ../../acisf13603/products/spectra/fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3.wrmf not found
[Thu May  2 13:51:27 2013] Removal of ../../acisf13603/products/spectra/fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3.soff failed
[Thu May  2 13:53:34 2013] Spectrum 3 has only 14 counts, deleting rmf
[Thu May  2 13:53:34 2013] 231.745
[Thu May  2 13:53:37 2013] Updating aperture counts using extracted products
[Thu May  2 13:53:37 2013] Total counts from fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3_src.pi.gz = 15.00
[Thu May  2 13:53:37 2013] Total counts from fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3_bgd.pi.gz = 3.00
[Thu May  2 13:53:37 2013] Got source and background scale factors 0.000001, 0.000011
[Thu May  2 13:53:37 2013] User source parameters:
  Position = (459.5, 687.8) = 10 48 15.63 -11 22 10.6
  Extent = 0.6 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 14.7 +/- 5.0
  Background aperture counts = 0.3
  Rate = 0.001 +/- 0.0005

[Thu May  2 13:53:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 13:53:38 2013] Using photon index=1.80, rate=0.00132, arf fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3.arf
[Thu May  2 13:53:38 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 13:53:38 2013] Updating source flux to 9.9e-15
[Thu May  2 13:53:42 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  2 13:53:43 2013] acisf13603/analysis//spectral/fullrun_ccd7_acisf13603_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete