[Sat May  4 11:36:00 2013] Detection parameters:
  Position = (560.4, 175.4) = 17 46 14.40 -32 6 12.1
  Extent = 0.7" x 0.5", rotation angle = 94 degrees
  Source counts = 15.9 +/- 4.0
  Background counts = 0.1
  Rate = 0.008 +/- 0.002

[Sat May  4 11:36:00 2013] Off-axis axis estimate = 4.24'
[Sat May  4 11:45:39 2013] Using EEF radius (= 0.90 ")to estimate initial spatial extent for simple fitting
[Sat May  4 11:45:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 11:45:39 2013] Initial guess for spatial extent in simple fitting = 0.90"
[Sat May  4 11:45:39 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.144
[Sat May  4 11:45:39 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.90"
[Sat May  4 11:46:43 2013] fullrun_ccd3_acisf13572_pi14-548_cl_pass0_src1.ximg exists
[Sat May  4 11:46:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13572_pi14-548_cl_pass0_src1.csv
[Sat May  4 11:46:43 2013] fullrun_ccd3_acisf13572_pi14-548_cl_pass0_src1_1.ximg exists
[Sat May  4 11:46:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13572_pi14-548_cl_pass0_src1.csv
[Sat May  4 11:46:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13572_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13572_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 11:46:43 2013] fullrun_ccd3_acisf13572_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat May  4 11:46:43 2013] fullrun_ccd3_acisf13572_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May  4 11:46:43 2013] Fit fullrun_ccd3_acisf13572_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May  4 11:46:45 2013] Spatial fit model total counts = 15.915200, observed total counts = 16.000000
[Sat May  4 11:46:45 2013] Offset between fit and detection position for source 3 = 0.748392 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.748392 pixels
  Position = (560.9, 176.0) = 17 46 14.40 -32 6 12.1
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 15.9 +/- 4.0
  Background counts = 0.0
  Rate = 0.008 +/- 0.002
[Sat May  4 11:46:45 2013] Vigneting correction estimate = 1.000000
[Sat May  4 11:46:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 11:46:45 2013] Assessing source extent using major axis lower bound
[Sat May  4 11:46:45 2013] Source does appear to be extended
[Sat May  4 11:46:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 11:57:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May  4 11:57:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 11:57:17 2013] Initial guess for spatial extent in simple fitting = 0.82"
[Sat May  4 11:57:17 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sat May  4 11:57:17 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.82"
[Sat May  4 11:58:24 2013] fullrun_ccd3_acisf13572_pi14-548_cl_pass1_src1.ximg exists
[Sat May  4 11:58:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13572_pi14-548_cl_pass1_src1.csv
[Sat May  4 11:58:24 2013] fullrun_ccd3_acisf13572_pi14-548_cl_pass1_src1_1.ximg exists
[Sat May  4 11:58:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13572_pi14-548_cl_pass1_src1.csv
[Sat May  4 11:58:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13572_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13572_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 11:58:24 2013] fullrun_ccd3_acisf13572_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat May  4 11:58:24 2013] fullrun_ccd3_acisf13572_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May  4 11:58:24 2013] Fit fullrun_ccd3_acisf13572_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May  4 11:58:25 2013] Spatial fit model total counts = 16.575100, observed total counts = 16.000000
[Sat May  4 11:58:25 2013] Offset between fit and detection position for source 3 = 0.032848 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.032848 pixels
  Position = (560.9, 175.9) = 17 46 14.40 -32 6 12.1
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 16.6 +/- 4.1
  Background counts = 0.0
  Rate = 0.009 +/- 0.002
[Sat May  4 11:58:25 2013] Vigneting correction estimate = 1.000000
[Sat May  4 11:58:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 11:58:25 2013] Assessing source extent using major axis lower bound
[Sat May  4 11:58:25 2013] Source does appear to be extended
[Sat May  4 11:58:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 12:00:49 2013] Writing source region out to fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3_src.reg
[Sat May  4 12:00:49 2013] Extracting stamp from image fullrun_ccd3_acisf13572_pi14-548_cl_sm2.00.img.gz, (523, 138) - (599, 214)
[Sat May  4 12:00:49 2013] Writing fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3.gif
[Sat May  4 12:00:51 2013] Size of ../../acisf13572/products/events/fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3_src.evt.gz[events] = 16 counts
[Sat May  4 12:00:51 2013] Mean chipx,y = (447.31, 894.19)
[Sat May  4 12:00:51 2013] Mean tdetx,y = (4237.81, 3508.31)
[Sat May  4 12:00:51 2013] chipx,y range = (431.00-465.00, 880.00-916.00)
[Sat May  4 12:00:51 2013] Size of ../../acisf13572/products/events/fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1 counts
[Sat May  4 12:00:52 2013] Not generating rmf since there are only 16 counts
[Sat May  4 12:00:52 2013] arf not found, will run specextract
[Sat May  4 12:01:19 2013] ../../acisf13572/products/spectra/fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3.warf not found
[Sat May  4 12:01:19 2013] ../../acisf13572/products/spectra/fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3.wrmf not found
[Sat May  4 12:01:19 2013] Removal of ../../acisf13572/products/spectra/fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3.soff failed
[Sat May  4 12:01:33 2013] Spectrum 3 has only 17 counts, deleting rmf
[Sat May  4 12:01:33 2013] 183.877
[Sat May  4 12:01:35 2013] Updating aperture counts using extracted products
[Sat May  4 12:01:35 2013] Total counts from fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3_src.pi.gz = 16.00
[Sat May  4 12:01:35 2013] Total counts from fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3_bgd.pi.gz = 1.00
[Sat May  4 12:01:35 2013] Got source and background scale factors 0.000002, 0.000025
[Sat May  4 12:01:35 2013] User source parameters:
  Position = (560.9, 175.9) = 17 46 14.40 -32 6 12.1
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source aperture counts = 15.9 +/- 5.1
  Background aperture counts = 0.1
  Rate = 0.008 +/- 0.003

[Sat May  4 12:01:35 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 12:01:35 2013] Using photon index=1.80, rate=0.00851, arf fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3.arf
[Sat May  4 12:01:35 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May  4 12:01:35 2013] Updating source flux to 1.2e-13
[Sat May  4 12:01:39 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May  4 12:01:40 2013] acisf13572/analysis//spectral/fullrun_ccd3_acisf13572_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete