[Sun May 19 00:08:16 2013] Detection parameters:
  Position = (247.9, 284.0) = 17 49 47.16 -31 17 22.6
  Extent = 1.1" x 0.9", rotation angle = 52 degrees
  Source counts = 10.5 +/- 3.3
  Background counts = 0.5
  Rate = 0.005 +/- 0.002

[Sun May 19 00:08:16 2013] Off-axis axis estimate = 6.86'
[Sun May 19 00:09:04 2013] Using EEF radius (= 2.10 ")to estimate initial spatial extent for simple fitting
[Sun May 19 00:09:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 00:09:04 2013] Initial guess for spatial extent in simple fitting = 2.10"
[Sun May 19 00:09:04 2013] source mask rpix=4.3, npix_max = 90, mask sum = 100, frac = 1.102
[Sun May 19 00:09:04 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 2.10"
[Sun May 19 00:13:50 2013] fullrun_ccd3_acisf13569_pi14-548_cl_pass0_src4.ximg exists
[Sun May 19 00:13:50 2013] fullrun_ccd3_acisf13569_pi14-548_cl_pass0_src4_1.ximg exists
[Sun May 19 00:13:50 2013] Fit fullrun_ccd3_acisf13569_pi14-548_cl_pass0_src4 appears to have run properly
[Sun May 19 00:13:50 2013] fullrun_ccd3_acisf13569_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun May 19 00:13:50 2013] fullrun_ccd3_acisf13569_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 19 00:13:50 2013] Fit fullrun_ccd3_acisf13569_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 19 00:13:52 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 23.993087 pixels away
[Sun May 19 00:13:52 2013] Vigneting correction estimate = 1.000000
[Sun May 19 00:13:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 00:13:52 2013] Assessing source extent using major
[Sun May 19 00:13:52 2013] Source does appear to be extended
[Sun May 19 00:13:52 2013] Computing asymmetry using major and minor axis, asym = 1.16
[Sun May 19 00:14:01 2013] Using EEF radius (= 2.10 ")to estimate initial spatial extent for simple fitting
[Sun May 19 00:14:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 00:14:01 2013] Initial guess for spatial extent in simple fitting = 2.10"
[Sun May 19 00:14:01 2013] source mask rpix=4.3, npix_max = 90, mask sum = 100, frac = 1.102
[Sun May 19 00:14:01 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 2.10"
[Sun May 19 00:19:17 2013] fullrun_ccd3_acisf13569_pi14-548_cl_pass1_src4.ximg exists
[Sun May 19 00:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13569_pi14-548_cl_pass1_src4.csv
[Sun May 19 00:19:17 2013] fullrun_ccd3_acisf13569_pi14-548_cl_pass1_src4_1.ximg exists
[Sun May 19 00:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13569_pi14-548_cl_pass1_src4.csv
[Sun May 19 00:19:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13569_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13569_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 00:19:17 2013] fullrun_ccd3_acisf13569_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun May 19 00:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13569_pi14-548_cl_pass1_tfrozen_src4.csv
[Sun May 19 00:19:17 2013] fullrun_ccd3_acisf13569_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 19 00:19:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13569_pi14-548_cl_pass1_tfrozen_src4.csv
[Sun May 19 00:19:17 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13569_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13569_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 00:19:19 2013] Spatial fit model total counts = 13.687100, observed total counts = 15.000000
[Sun May 19 00:19:19 2013] Offset between fit and detection position for source 7 = 0.488069 pixels
[Sun May 19 00:19:19 2013] 13.628269 total counts/ 0.009469 bgd. counts: snr = 139.957577
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.488069 pixels
  Position = (247.8, 283.5) = 17 49 47.19 -31 17 23.1
  Extent = 1.7 (1.3-2.2)", rotation angle = 0
  Source counts = 13.6 +/- 3.7
  Background counts = 0.0
  Rate = 0.007 +/- 0.002
[Sun May 19 00:19:19 2013] Vigneting correction estimate = 1.000000
[Sun May 19 00:19:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 00:19:19 2013] Assessing source extent using major axis lower bound
[Sun May 19 00:19:19 2013] Source does appear to be extended
[Sun May 19 00:19:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 00:24:15 2013] Writing source region out to fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7_src.reg
[Sun May 19 00:24:15 2013] Extracting stamp from image fullrun_ccd3_acisf13569_pi14-548_cl_sm2.00.img.gz, (169, 205) - (326, 362)
[Sun May 19 00:24:15 2013] Writing fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7.gif
[Sun May 19 00:26:06 2013] Size of ../../acisf13569/products/events/fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7_src.evt.gz[events] = 15 counts
[Sun May 19 00:26:06 2013] Mean chipx,y = (166.80, 735.93)
[Sun May 19 00:26:06 2013] Mean tdetx,y = (4396.07, 3227.80)
[Sun May 19 00:26:06 2013] chipx,y range = (147.00-182.00, 713.00-755.00)
[Sun May 19 00:26:06 2013] Size of ../../acisf13569/products/events/fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 6 counts
[Sun May 19 00:26:07 2013] Not generating rmf since there are only 13 counts
[Sun May 19 00:26:07 2013] arf not found, will run specextract
[Sun May 19 00:26:33 2013] ../../acisf13569/products/spectra/fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7.warf not found
[Sun May 19 00:26:33 2013] ../../acisf13569/products/spectra/fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7.wrmf not found
[Sun May 19 00:26:33 2013] Removal of ../../acisf13569/products/spectra/fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7.soff failed
[Sun May 19 00:28:43 2013] Spectrum 7 has only 14 counts, deleting rmf
[Sun May 19 00:28:43 2013] 169.945
[Sun May 19 00:28:46 2013] Updating aperture counts using extracted products
[Sun May 19 00:28:46 2013] Total counts from fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7_src.pi.gz = 15.00
[Sun May 19 00:28:46 2013] Total counts from fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7_bgd.pi.gz = 6.00
[Sun May 19 00:28:46 2013] Got source and background scale factors 0.000009, 0.000108
[Sun May 19 00:28:46 2013] User source parameters:
  Position = (247.8, 283.5) = 17 49 47.19 -31 17 23.1
  Extent = 1.7 (1.3-2.2)", rotation angle = 0
  Source aperture counts = 14.5 +/- 5.0
  Background aperture counts = 0.5
  Rate = 0.007 +/- 0.003

[Sun May 19 00:28:47 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 00:28:47 2013] Using photon index=1.80, rate=0.007, arf fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7.arf
[Sun May 19 00:28:47 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May 19 00:28:47 2013] Updating source flux to 1.1e-13
[Sun May 19 00:28:51 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 19 00:28:52 2013] acisf13569/analysis//spectral/fullrun_ccd3_acisf13569_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete