[Mon May 13 00:33:39 2013] Detection parameters:
  Position = (375.6, 855.4) = 17 53 27.86 -29 57 18.1
  Extent = 0.5" x 0.5", rotation angle = 124 degrees
  Source counts = 11.9 +/- 3.5
  Background counts = 0.1
  Rate = 0.006 +/- 0.002

[Mon May 13 00:33:39 2013] Off-axis axis estimate = 5.08'
[Mon May 13 00:41:19 2013] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:41:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 00:41:19 2013] Initial guess for spatial extent in simple fitting = 1.21"
[Mon May 13 00:41:19 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026
[Mon May 13 00:41:19 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.21"
[Mon May 13 00:43:11 2013] fullrun_ccd2_acisf13562_pi14-548_cl_pass0_src1.ximg exists
[Mon May 13 00:43:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13562_pi14-548_cl_pass0_src1.csv
[Mon May 13 00:43:11 2013] fullrun_ccd2_acisf13562_pi14-548_cl_pass0_src1_1.ximg exists
[Mon May 13 00:43:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13562_pi14-548_cl_pass0_src1.csv
[Mon May 13 00:43:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13562_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13562_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:43:11 2013] fullrun_ccd2_acisf13562_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon May 13 00:43:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13562_pi14-548_cl_pass0_tfrozen_src1.csv
[Mon May 13 00:43:11 2013] fullrun_ccd2_acisf13562_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 13 00:43:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13562_pi14-548_cl_pass0_tfrozen_src1.csv
[Mon May 13 00:43:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13562_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13562_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:43:13 2013] Spatial fit model total counts = 19.255400, observed total counts = 23.000000
[Mon May 13 00:43:13 2013] Offset between fit and detection position for source 4 = 1.422243 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.422243 pixels
  Position = (376.6, 856.4) = 17 53 27.85 -29 57 17.8
  Extent = 1.6 (1.0-2.4)" x 0.7 (0.5-1.0)", rotation angle = 57 (41-78) degrees
  Source counts = 20.2 +/- 4.5
  Background counts = 0.0
  Rate = 0.01 +/- 0.002
[Mon May 13 00:43:13 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:43:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:43:13 2013] Assessing source extent using major axis lower bound
[Mon May 13 00:43:13 2013] Source does appear to be extended
[Mon May 13 00:43:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Mon May 13 00:44:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 00:44:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 00:44:54 2013] Initial guess for spatial extent in simple fitting = 1.13"
[Mon May 13 00:44:54 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.804
[Mon May 13 00:44:54 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.13"
[Mon May 13 00:46:30 2013] fullrun_ccd2_acisf13562_pi14-548_cl_pass1_src1.ximg exists
[Mon May 13 00:46:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13562_pi14-548_cl_pass1_src1.csv
[Mon May 13 00:46:30 2013] fullrun_ccd2_acisf13562_pi14-548_cl_pass1_src1_1.ximg exists
[Mon May 13 00:46:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13562_pi14-548_cl_pass1_src1.csv
[Mon May 13 00:46:30 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13562_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13562_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:46:30 2013] fullrun_ccd2_acisf13562_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon May 13 00:46:30 2013] fullrun_ccd2_acisf13562_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 13 00:46:30 2013] Fit fullrun_ccd2_acisf13562_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 13 00:46:31 2013] Spatial fit model total counts = 19.534500, observed total counts = 23.000000
[Mon May 13 00:46:31 2013] Offset between fit and detection position for source 4 = 0.395192 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.395192 pixels
  Position = (376.7, 856.1) = 17 53 27.84 -29 57 18.0
  Extent = 1.5 (1.1-2.3)" x 0.7 (0.5-0.9)", rotation angle = 54 (40-71) degrees
  Source counts = 20.6 +/- 4.5
  Background counts = 0.0
  Rate = 0.01 +/- 0.002
[Mon May 13 00:46:31 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:46:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:46:31 2013] Assessing source extent using major axis lower bound
[Mon May 13 00:46:31 2013] Source does appear to be extended
[Mon May 13 00:46:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Mon May 13 00:47:07 2013] Writing source region out to fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4_src.reg
[Mon May 13 00:47:07 2013] Extracting stamp from image fullrun_ccd2_acisf13562_pi14-548_cl_sm2.00.img.gz, (306, 785) - (448, 927)
[Mon May 13 00:47:07 2013] Writing fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4.gif
[Mon May 13 00:47:08 2013] Size of ../../acisf13562/products/events/fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4_src.evt.gz[events] = 19 counts
[Mon May 13 00:47:08 2013] Mean chipx,y = (654.53, 846.05)
[Mon May 13 00:47:08 2013] Mean tdetx,y = (3907.05, 3431.47)
[Mon May 13 00:47:08 2013] chipx,y range = (637.00-669.00, 828.00-869.00)
[Mon May 13 00:47:08 2013] Size of ../../acisf13562/products/events/fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 6 counts
[Mon May 13 00:47:09 2013] Not generating rmf since there are only 20 counts
[Mon May 13 00:47:09 2013] arf not found, will run specextract
[Mon May 13 00:47:41 2013] ../../acisf13562/products/spectra/fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4.warf not found
[Mon May 13 00:47:41 2013] ../../acisf13562/products/spectra/fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4.wrmf not found
[Mon May 13 00:47:41 2013] Removal of ../../acisf13562/products/spectra/fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4.soff failed
[Mon May 13 00:49:02 2013] Spectrum 4 has only 21 counts, deleting rmf
[Mon May 13 00:49:02 2013] 174.378
[Mon May 13 00:49:51 2013] Updating aperture counts using extracted products
[Mon May 13 00:49:51 2013] Total counts from fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4_src.pi.gz = 19.00
[Mon May 13 00:49:51 2013] Total counts from fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4_bgd.pi.gz = 6.00
[Mon May 13 00:49:51 2013] Got source and background scale factors 0.000003, 0.000088
[Mon May 13 00:49:51 2013] User source parameters:
  Position = (376.7, 856.1) = 17 53 27.84 -29 57 18.0
  Extent = 1.5 (1.1-2.3)" x 0.7 (0.5-0.9)", rotation angle = 54 (40-71) degrees
  Source aperture counts = 18.8 +/- 5.4
  Background aperture counts = 0.2
  Rate = 0.01 +/- 0.003

[Mon May 13 00:49:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 00:49:52 2013] Using photon index=1.80, rate=0.0106, arf fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4.arf
[Mon May 13 00:49:52 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 13 00:49:52 2013] Updating source flux to 1.5e-13
[Mon May 13 00:49:55 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 13 00:49:56 2013] acisf13562/analysis//spectral/fullrun_ccd2_acisf13562_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete