[Mon May 27 14:23:44 2013] Detection parameters:
  Position = (1004.2, 906.4) = 17 52 53.03 -29 22 10.1
  Extent = 0.9" x 0.5", rotation angle = 64 degrees
  Source counts = 27.8 +/- 5.7
  Background counts = 4.2
  Rate = 0.01 +/- 0.003

[Mon May 27 14:23:44 2013] Off-axis axis estimate = 9.10'
[Mon May 27 14:25:41 2013] Using EEF radius (= 3.66 ")to estimate initial spatial extent for simple fitting
[Mon May 27 14:25:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 14:25:41 2013] Initial guess for spatial extent in simple fitting = 3.66"
[Mon May 27 14:25:41 2013] source mask rpix=7.4, npix_max = 252, mask sum = 240, frac = 0.950
[Mon May 27 14:25:41 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 3.66"
[Mon May 27 14:32:07 2013] fullrun_ccd0_acisf13529_pi14-548_cl_pass0_src1.ximg exists
[Mon May 27 14:32:07 2013] fullrun_ccd0_acisf13529_pi14-548_cl_pass0_src1_1.ximg exists
[Mon May 27 14:32:07 2013] Fit fullrun_ccd0_acisf13529_pi14-548_cl_pass0_src1 appears to have run properly
[Mon May 27 14:32:07 2013] fullrun_ccd0_acisf13529_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon May 27 14:32:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13529_pi14-548_cl_pass0_tfrozen_src1.csv
[Mon May 27 14:32:07 2013] fullrun_ccd0_acisf13529_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 27 14:32:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13529_pi14-548_cl_pass0_tfrozen_src1.csv
[Mon May 27 14:32:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13529_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13529_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 14:39:35 2013] Spatial fit model total counts = 47.505800, observed total counts = 49.000000
[Mon May 27 14:39:35 2013] Offset between fit and detection position for source 1 = 3.350705 pixels
[Mon May 27 14:39:35 2013] 47.464740 total counts/ 3.556640 bgd. counts: snr = 23.282236
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.350705 pixels
  Position = (1001.6, 908.5) = 17 52 53.15 -29 22 9.3
  Extent = 4.4 (3.5-5.6)" x 3.1 (2.4-4.1)", rotation angle = 32 (305-90) degrees
  Source counts = 43.9 +/- 6.9
  Background counts = 3.6
  Rate = 0.02 +/- 0.004
[Mon May 27 14:39:35 2013] Vigneting correction estimate = 1.000000
[Mon May 27 14:39:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 14:39:35 2013] Assessing source extent using major axis lower bound
[Mon May 27 14:39:35 2013] Source does appear to be extended
[Mon May 27 14:39:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Mon May 27 14:39:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 14:39:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 14:39:43 2013] Initial guess for spatial extent in simple fitting = 3.76"
[Mon May 27 14:39:43 2013] source mask rpix=7.6, npix_max = 265, mask sum = 272, frac = 1.025
[Mon May 27 14:39:43 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 3.76"
[Mon May 27 14:43:57 2013] fullrun_ccd0_acisf13529_pi14-548_cl_pass1_src1.ximg exists
[Mon May 27 14:43:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13529_pi14-548_cl_pass1_src1.csv
[Mon May 27 14:43:57 2013] fullrun_ccd0_acisf13529_pi14-548_cl_pass1_src1_1.ximg exists
[Mon May 27 14:43:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13529_pi14-548_cl_pass1_src1.csv
[Mon May 27 14:43:57 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13529_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13529_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 14:43:57 2013] fullrun_ccd0_acisf13529_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon May 27 14:43:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13529_pi14-548_cl_pass1_tfrozen_src1.csv
[Mon May 27 14:43:57 2013] fullrun_ccd0_acisf13529_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 27 14:43:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13529_pi14-548_cl_pass1_tfrozen_src1.csv
[Mon May 27 14:43:57 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13529_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13529_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 14:50:48 2013] Warning, spatial fit 1 centroid is now closest to src. 6
[Mon May 27 14:50:48 2013] Vigneting correction estimate = 1.000000
[Mon May 27 14:50:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 14:50:48 2013] Assessing source extent using major axis lower bound
[Mon May 27 14:50:48 2013] Source does appear to be extended
[Mon May 27 14:50:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Mon May 27 14:50:55 2013] Writing source region out to fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1_src.reg
[Mon May 27 14:50:55 2013] Extracting stamp from image fullrun_ccd0_acisf13529_pi14-548_cl_sm2.00.img.gz, (801, 708) - (1095, 1095)
[Mon May 27 14:50:55 2013] Writing fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1.gif
[Mon May 27 14:50:57 2013] Size of ../../acisf13529/products/events/fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1_src.evt.gz[events] = 47 counts
[Mon May 27 14:50:57 2013] Mean chipx,y = (29.09, 834.55)
[Mon May 27 14:50:57 2013] Mean tdetx,y = (3895.55, 5102.91)
[Mon May 27 14:50:57 2013] chipx,y range = (10.00-64.00, 797.00-858.00)
[Mon May 27 14:50:57 2013] Size of ../../acisf13529/products/events/fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 22 counts
[Mon May 27 14:50:58 2013] Not generating rmf since there are only 43 counts
[Mon May 27 14:50:58 2013] arf not found, will run specextract
[Mon May 27 14:51:24 2013] ../../acisf13529/products/spectra/fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1.warf not found
[Mon May 27 14:51:24 2013] ../../acisf13529/products/spectra/fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1.wrmf not found
[Mon May 27 14:51:24 2013] Removal of ../../acisf13529/products/spectra/fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1.soff failed
[Mon May 27 14:53:56 2013] Spectrum 1 has only 44 counts, deleting rmf
[Mon May 27 14:53:56 2013] 161.163
[Mon May 27 14:56:05 2013] Updating aperture counts using extracted products
[Mon May 27 14:56:05 2013] Total counts from fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1_src.pi.gz = 47.00
[Mon May 27 14:56:05 2013] Total counts from fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1_bgd.pi.gz = 22.00
[Mon May 27 14:56:05 2013] Got source and background scale factors 0.000043, 0.000701
[Mon May 27 14:56:05 2013] User source parameters:
  Position = (1001.6, 908.5) = 17 52 53.15 -29 22 9.3
  Extent = 4.4 (3.5-5.6)" x 3.1 (2.4-4.1)", rotation angle = 32 (305-90) degrees
  Source aperture counts = 45.7 +/- 7.9
  Background aperture counts = 1.3
  Rate = 0.02 +/- 0.004

[Mon May 27 14:56:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 27 14:56:06 2013] Using photon index=1.80, rate=0.0225, arf fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1.arf
[Mon May 27 14:56:06 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon May 27 14:56:06 2013] Updating source flux to 3.6e-13
[Mon May 27 14:56:07 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May 27 14:56:08 2013] acisf13529/analysis//spectral/fullrun_ccd0_acisf13529_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete