[Fri Aug 14 06:20:17 2015] Detection parameters:
  Position = (1185.5, 657.0) = 6 24 56.04 -53 59 39.6
  Extent = 0.7" x 0.6", rotation angle = 5 degrees
  Source counts = 10.1 +/- 3.3
  Background counts = 0.9
  Rate = 0.0002 +/- 7e-05

[Fri Aug 14 06:20:18 2015] Off-axis axis estimate = 6.91'
[Fri Aug 14 06:38:30 2015] Using EEF radius (= 2.13 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 06:38:30 2015] Initial guess for spatial extent in simple fitting = 2.13"
[Fri Aug 14 06:38:30 2015] source mask rpix=4.3, npix_max = 93, mask sum = 90, frac = 0.967
[Fri Aug 14 06:38:30 2015] Giving source the simple spatial ID 12 for pass 0, mean size = 2.13"
[Fri Aug 14 06:49:22 2015] fullrun_ccd3_acisf13525_pi14-548_cl_pass0_src12.ximg exists
[Fri Aug 14 06:49:22 2015] fullrun_ccd3_acisf13525_pi14-548_cl_pass0_src12_1.ximg exists
[Fri Aug 14 06:49:22 2015] Fit fullrun_ccd3_acisf13525_pi14-548_cl_pass0_src12 appears to have run properly
[Fri Aug 14 06:49:22 2015] fullrun_ccd3_acisf13525_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri Aug 14 06:49:22 2015] fullrun_ccd3_acisf13525_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Aug 14 06:49:22 2015] Fit fullrun_ccd3_acisf13525_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Aug 14 06:49:29 2015] Spatial fit model total counts = 18.899900, observed total counts = 19.000000
[Fri Aug 14 06:49:29 2015] Offset between fit and detection position for source 12 = 0.383203 pixels
[Fri Aug 14 06:49:29 2015] 18.680540 total counts/ 3.256740 bgd. counts: snr = 8.546727
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.383203 pixels
  Position = (1185.6, 657.4) = 6 24 56.12 -53 59 39.8
  Extent = 2.1 (1.4-3.1)" x 0.7 (0.5-1.0)", rotation angle = 46 (32-60) degrees
  Source counts = 15.4 +/- 4.3
  Background counts = 3.3
  Rate = 0.0003 +/- 9e-05
[Fri Aug 14 06:49:29 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 06:49:29 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 06:49:29 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 06:49:29 2015] Source does appear to be extended
[Fri Aug 14 06:49:29 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.37
[Fri Aug 14 07:02:46 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 07:02:46 2015] Initial guess for spatial extent in simple fitting = 1.41"
[Fri Aug 14 07:02:46 2015] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.077
[Fri Aug 14 07:02:46 2015] Giving source the simple spatial ID 12 for pass 1, mean size = 1.41"
[Fri Aug 14 07:12:15 2015] fullrun_ccd3_acisf13525_pi14-548_cl_pass1_src12.ximg exists
[Fri Aug 14 07:12:15 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13525_pi14-548_cl_pass1_src12.csv
[Fri Aug 14 07:12:15 2015] fullrun_ccd3_acisf13525_pi14-548_cl_pass1_src12_1.ximg exists
[Fri Aug 14 07:12:15 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13525_pi14-548_cl_pass1_src12.csv
[Fri Aug 14 07:12:15 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13525_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13525_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 07:12:16 2015] fullrun_ccd3_acisf13525_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri Aug 14 07:12:16 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13525_pi14-548_cl_pass1_tfrozen_src12.csv
[Fri Aug 14 07:12:16 2015] fullrun_ccd3_acisf13525_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Aug 14 07:12:16 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13525_pi14-548_cl_pass1_tfrozen_src12.csv
[Fri Aug 14 07:12:16 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13525_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13525_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 07:12:22 2015] Spatial fit model total counts = 14.529200, observed total counts = 17.000000
[Fri Aug 14 07:12:22 2015] Offset between fit and detection position for source 12 = 1.914970 pixels
[Fri Aug 14 07:12:22 2015] 16.012240 total counts/ 5.048240 bgd. counts: snr = 4.879766
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.914970 pixels
  Position = (1184.3, 656.1) = 6 24 56.20 -53 59 40.4
  Extent = 1.5 (0.9-2.8)" x 0.4 (0.4-0.8)", rotation angle = 44 (22-58) degrees
  Source counts = 11.0 +/- 4.0
  Background counts = 5.0
  Rate = 0.0002 +/- 8e-05
[Fri Aug 14 07:12:22 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 07:12:22 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 07:12:22 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 07:12:22 2015] Source does appear to be extended
[Fri Aug 14 07:12:22 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.24