[Fri Aug 14 22:41:22 2015] Detection parameters:
  Position = (1033.8, 765.5) = 6 26 29.19 -54 22 1.0
  Extent = 1.0" x 0.5", rotation angle = 39 degrees
  Source counts = 13.5 +/- 3.9
  Background counts = 1.5
  Rate = 0.0003 +/- 8e-05

[Fri Aug 14 22:41:23 2015] Off-axis axis estimate = 5.54'
[Fri Aug 14 22:57:34 2015] Using EEF radius (= 1.41 ")to estimate initial spatial extent for simple fitting
[Fri Aug 14 22:57:34 2015] Initial guess for spatial extent in simple fitting = 1.41"
[Fri Aug 14 22:57:34 2015] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.082
[Fri Aug 14 22:57:34 2015] Giving source the simple spatial ID 8 for pass 0, mean size = 1.41"
[Fri Aug 14 23:04:17 2015] fullrun_ccd3_acisf13522_pi14-548_cl_pass0_src8.ximg exists
[Fri Aug 14 23:04:17 2015] fullrun_ccd3_acisf13522_pi14-548_cl_pass0_src8_1.ximg exists
[Fri Aug 14 23:04:17 2015] Fit fullrun_ccd3_acisf13522_pi14-548_cl_pass0_src8 appears to have run properly
[Fri Aug 14 23:04:17 2015] fullrun_ccd3_acisf13522_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Fri Aug 14 23:04:17 2015] fullrun_ccd3_acisf13522_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Aug 14 23:04:17 2015] Fit fullrun_ccd3_acisf13522_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Aug 14 23:04:23 2015] Spatial fit model total counts = 22.168000, observed total counts = 22.000000
[Fri Aug 14 23:04:23 2015] Offset between fit and detection position for source 9 = 1.786099 pixels
[Fri Aug 14 23:04:23 2015] 22.204100 total counts/ 5.878900 bgd. counts: snr = 6.733029
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.786099 pixels
  Position = (1035.3, 766.5) = 6 26 29.17 -54 22 0.8
  Extent = 1.8 (0.8-2.8)" x 0.5 (0.4-0.7)", rotation angle = 33 (22-45) degrees
  Source counts = 16.3 +/- 4.7
  Background counts = 5.9
  Rate = 0.0003 +/- 0.0001
[Fri Aug 14 23:04:23 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 23:04:23 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 23:04:23 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 23:04:23 2015] Source does appear to be extended
[Fri Aug 14 23:04:23 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Fri Aug 14 23:15:47 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 14 23:15:47 2015] Initial guess for spatial extent in simple fitting = 1.14"
[Fri Aug 14 23:15:47 2015] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.942
[Fri Aug 14 23:15:47 2015] Giving source the simple spatial ID 8 for pass 1, mean size = 1.14"
[Fri Aug 14 23:22:40 2015] fullrun_ccd3_acisf13522_pi14-548_cl_pass1_src8.ximg exists
[Fri Aug 14 23:22:40 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13522_pi14-548_cl_pass1_src8.csv
[Fri Aug 14 23:22:40 2015] fullrun_ccd3_acisf13522_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Aug 14 23:22:40 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13522_pi14-548_cl_pass1_src8.csv
[Fri Aug 14 23:22:40 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13522_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13522_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 23:22:41 2015] fullrun_ccd3_acisf13522_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Aug 14 23:22:41 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13522_pi14-548_cl_pass1_tfrozen_src8.csv
[Fri Aug 14 23:22:41 2015] fullrun_ccd3_acisf13522_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Aug 14 23:22:41 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13522_pi14-548_cl_pass1_tfrozen_src8.csv
[Fri Aug 14 23:22:41 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13522_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13522_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 14 23:22:47 2015] Spatial fit model total counts = 14.877500, observed total counts = 20.000000
[Fri Aug 14 23:22:47 2015] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 14 23:22:47 2015] Vigneting correction estimate = 1.000000
[Fri Aug 14 23:22:47 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 14 23:22:47 2015] Assessing source extent using major axis lower bound
[Fri Aug 14 23:22:47 2015] Source does appear to be extended
[Fri Aug 14 23:22:47 2015] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14