[Thu Aug 13 20:37:39 2015] Detection parameters:
  Position = (588.9, 990.9) = 6 26 19.14 -54 8 8.9
  Extent = 0.6" x 0.5", rotation angle = 156 degrees
  Source counts = 12.8 +/- 3.7
  Background counts = 1.2
  Rate = 0.0003 +/- 8e-05

[Thu Aug 13 20:37:39 2015] Off-axis axis estimate = 3.64'
[Thu Aug 13 21:00:39 2015] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Thu Aug 13 21:00:39 2015] Initial guess for spatial extent in simple fitting = 0.73"
[Thu Aug 13 21:00:39 2015] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.020
[Thu Aug 13 21:00:39 2015] Giving source the simple spatial ID 7 for pass 0, mean size = 0.73"
[Thu Aug 13 21:04:49 2015] fullrun_ccd3_acisf13519_pi14-548_cl_pass0_src7.ximg exists
[Thu Aug 13 21:04:49 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13519_pi14-548_cl_pass0_src7.csv
[Thu Aug 13 21:04:49 2015] fullrun_ccd3_acisf13519_pi14-548_cl_pass0_src7_1.ximg exists
[Thu Aug 13 21:04:49 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13519_pi14-548_cl_pass0_src7.csv
[Thu Aug 13 21:04:49 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13519_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13519_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 21:04:49 2015] fullrun_ccd3_acisf13519_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Thu Aug 13 21:04:49 2015] fullrun_ccd3_acisf13519_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Aug 13 21:04:49 2015] Fit fullrun_ccd3_acisf13519_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Aug 13 21:04:57 2015] Spatial fit model total counts = 15.650800, observed total counts = 16.000000
[Thu Aug 13 21:04:57 2015] Offset between fit and detection position for source 5 = 0.649589 pixels
[Thu Aug 13 21:04:57 2015] 15.302870 total counts/ 2.834170 bgd. counts: snr = 7.406418
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.649589 pixels
  Position = (589.5, 991.1) = 6 26 19.12 -54 8 9.1
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 12.5 +/- 3.9
  Background counts = 2.8
  Rate = 0.0003 +/- 8e-05
[Thu Aug 13 21:04:57 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 21:04:57 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 21:04:57 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 21:04:57 2015] Source does appear to be extended
[Thu Aug 13 21:04:57 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 21:25:10 2015] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 13 21:25:10 2015] Initial guess for spatial extent in simple fitting = 0.59"
[Thu Aug 13 21:25:10 2015] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.028
[Thu Aug 13 21:25:10 2015] Giving source the simple spatial ID 7 for pass 1, mean size = 0.59"
[Thu Aug 13 21:28:51 2015] fullrun_ccd3_acisf13519_pi14-548_cl_pass1_src7.ximg exists
[Thu Aug 13 21:28:51 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13519_pi14-548_cl_pass1_src7.csv
[Thu Aug 13 21:28:51 2015] fullrun_ccd3_acisf13519_pi14-548_cl_pass1_src7_1.ximg exists
[Thu Aug 13 21:28:51 2015] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13519_pi14-548_cl_pass1_src7.csv
[Thu Aug 13 21:28:51 2015] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13519_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13519_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 13 21:28:51 2015] fullrun_ccd3_acisf13519_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Thu Aug 13 21:28:51 2015] fullrun_ccd3_acisf13519_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Aug 13 21:28:51 2015] Fit fullrun_ccd3_acisf13519_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Aug 13 21:28:59 2015] Spatial fit model total counts = 15.753100, observed total counts = 16.000000
[Thu Aug 13 21:28:59 2015] Offset between fit and detection position for source 5 = 0.052204 pixels
[Thu Aug 13 21:28:59 2015] 15.365810 total counts/ 2.695610 bgd. counts: snr = 7.717114
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.052204 pixels
  Position = (589.6, 991.2) = 6 26 19.12 -54 8 9.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 12.7 +/- 3.9
  Background counts = 2.7
  Rate = 0.0003 +/- 8e-05
[Thu Aug 13 21:28:59 2015] Vigneting correction estimate = 1.000000
[Thu Aug 13 21:28:59 2015] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 13 21:28:59 2015] Assessing source extent using major axis lower bound
[Thu Aug 13 21:28:59 2015] Source does appear to be extended
[Thu Aug 13 21:28:59 2015] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 13 22:02:03 2015] Writing source region out to fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5_src.reg
[Thu Aug 13 22:02:03 2015] Extracting stamp from image fullrun_ccd3_acisf13519_pi14-548_cl_sm2.00.img.gz, (562, 964) - (617, 1019)
[Thu Aug 13 22:02:03 2015] Writing fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5.gif
[Thu Aug 13 22:06:30 2015] Size of ../../acisf13519/products/events/fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5_src.evt.gz[events] = 14 counts
[Thu Aug 13 22:06:30 2015] Mean chipx,y = (815.07, 610.14)
[Thu Aug 13 22:06:30 2015] Mean tdetx,y = (4521.86, 3876.07)
[Thu Aug 13 22:06:30 2015] chipx,y range = (792.00-830.00, 595.00-626.00)
[Thu Aug 13 22:06:30 2015] Size of ../../acisf13519/products/events/fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 11 counts
[Thu Aug 13 22:06:31 2015] Not generating rmf since there are only 12 counts
[Thu Aug 13 22:06:31 2015] arf not found, will run specextract
[Thu Aug 13 22:07:11 2015] ../../acisf13519/products/spectra/fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5.warf not found
[Thu Aug 13 22:07:11 2015] ../../acisf13519/products/spectra/fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5.wrmf not found
[Thu Aug 13 22:07:11 2015] Removal of ../../acisf13519/products/spectra/fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5.soff failed
[Thu Aug 13 22:11:10 2015] Spectrum 5 has only 13 counts, deleting rmf
[Thu Aug 13 22:11:10 2015] 188.727
[Thu Aug 13 22:12:53 2015] Updating aperture counts using extracted products
[Thu Aug 13 22:12:53 2015] Total counts from fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5_src.pi.gz = 14.00
[Thu Aug 13 22:12:53 2015] Total counts from fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5_bgd.pi.gz = 11.00
[Thu Aug 13 22:12:53 2015] Got source and background scale factors 0.000001, 0.000013
[Thu Aug 13 22:12:53 2015] User source parameters:
  Position = (589.6, 991.2) = 6 26 19.12 -54 8 9.1
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source aperture counts = 13.1 +/- 4.8
  Background aperture counts = 0.9
  Rate = 0.0003 +/- 0.0001

[Thu Aug 13 22:12:54 2015] Calculating source flux in energy range 0.30-8.00
[Thu Aug 13 22:12:54 2015] Using photon index=1.80, rate=0.000267, arf fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5.arf
[Thu Aug 13 22:12:54 2015] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Aug 13 22:12:54 2015] Updating source flux to 3.4e-15
[Thu Aug 13 22:13:13 2015] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Aug 13 22:13:14 2015] acisf13519/analysis//spectral/fullrun_ccd3_acisf13519_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete