[Wed May 8 00:47:27 2013] Detection parameters: Position = (923.1, 535.4) = 20 31 39.95 -40 44 42.9 Extent = 0.8" x 0.5", rotation angle = 72 degrees Source counts = 13.7 +/- 3.7 Background counts = 0.3 Rate = 0.001 +/- 0.0004 [Wed May 8 00:47:28 2013] Off-axis axis estimate = 4.76' [Wed May 8 01:04:19 2013] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting [Wed May 8 01:04:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 01:04:19 2013] Initial guess for spatial extent in simple fitting = 1.09" [Wed May 8 01:04:19 2013] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.680 [Wed May 8 01:04:19 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 1.09" [Wed May 8 01:10:23 2013] fullrun_ccd2_acisf13517_pi14-548_cl_pass0_src3.ximg exists [Wed May 8 01:10:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13517_pi14-548_cl_pass0_src3.csv [Wed May 8 01:10:23 2013] fullrun_ccd2_acisf13517_pi14-548_cl_pass0_src3_1.ximg exists [Wed May 8 01:10:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13517_pi14-548_cl_pass0_src3.csv [Wed May 8 01:10:23 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13517_pi14-548_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13517_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:10:24 2013] fullrun_ccd2_acisf13517_pi14-548_cl_pass0_tfrozen_src3.ximg exists [Wed May 8 01:10:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13517_pi14-548_cl_pass0_tfrozen_src3.csv [Wed May 8 01:10:24 2013] fullrun_ccd2_acisf13517_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists [Wed May 8 01:10:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13517_pi14-548_cl_pass0_tfrozen_src3.csv [Wed May 8 01:10:24 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13517_pi14-548_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13517_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:15:57 2013] Spatial fit model total counts = 15.722300, observed total counts = 30.000000 [Wed May 8 01:15:57 2013] Poor agreement between spatial fit and data for source 4 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 8 01:15:57 2013] Vigneting correction estimate = 1.000000 [Wed May 8 01:15:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 01:15:57 2013] Assessing source extent using major [Wed May 8 01:15:57 2013] Source does appear to be extended [Wed May 8 01:15:57 2013] Computing asymmetry using major and minor axis, asym = 1.61 [Wed May 8 01:15:57 2013] Source is asymmetric [Wed May 8 01:32:39 2013] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting [Wed May 8 01:32:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 8 01:32:39 2013] Initial guess for spatial extent in simple fitting = 1.09" [Wed May 8 01:32:39 2013] source mask rpix=2.2, npix_max = 29, mask sum = 20, frac = 0.680 [Wed May 8 01:32:39 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 1.09" [Wed May 8 01:39:00 2013] fullrun_ccd2_acisf13517_pi14-548_cl_pass1_src3.ximg exists [Wed May 8 01:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13517_pi14-548_cl_pass1_src3.csv [Wed May 8 01:39:00 2013] fullrun_ccd2_acisf13517_pi14-548_cl_pass1_src3_1.ximg exists [Wed May 8 01:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13517_pi14-548_cl_pass1_src3.csv [Wed May 8 01:39:00 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13517_pi14-548_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13517_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:39:00 2013] fullrun_ccd2_acisf13517_pi14-548_cl_pass1_tfrozen_src3.ximg exists [Wed May 8 01:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13517_pi14-548_cl_pass1_tfrozen_src3.csv [Wed May 8 01:39:00 2013] fullrun_ccd2_acisf13517_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists [Wed May 8 01:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13517_pi14-548_cl_pass1_tfrozen_src3.csv [Wed May 8 01:39:00 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf13517_pi14-548_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf13517_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 01:44:48 2013] Spatial fit model total counts = 15.722300, observed total counts = 30.000000 [Wed May 8 01:44:48 2013] Poor agreement between spatial fit and data for source 4 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 8 01:44:48 2013] Vigneting correction estimate = 1.000000 [Wed May 8 01:44:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 01:44:48 2013] Assessing source extent using major [Wed May 8 01:44:48 2013] Source does appear to be extended [Wed May 8 01:44:48 2013] Computing asymmetry using major and minor axis, asym = 1.61 [Wed May 8 01:44:48 2013] Source is asymmetric [Wed May 8 01:49:18 2013] Writing source region out to fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4_src.reg [Wed May 8 01:49:18 2013] Extracting stamp from image fullrun_ccd2_acisf13517_pi14-548_cl_sm2.00.img.gz, (887, 499) - (959, 571) [Wed May 8 01:49:18 2013] Writing fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4.gif [Wed May 8 01:50:42 2013] Size of ../../acisf13517/products/events/fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4_src.evt.gz[events] = 21 counts [Wed May 8 01:50:42 2013] Mean chipx,y = (133.57, 529.48) [Wed May 8 01:50:42 2013] Mean tdetx,y = (3590.48, 3952.43) [Wed May 8 01:50:42 2013] chipx,y range = (117.00-152.00, 515.00-549.00) [Wed May 8 01:50:42 2013] Size of ../../acisf13517/products/events/fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 4 counts [Wed May 8 01:50:43 2013] Not generating rmf since there are only 13 counts [Wed May 8 01:50:43 2013] arf not found, will run specextract [Wed May 8 01:51:08 2013] ../../acisf13517/products/spectra/fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4.warf not found [Wed May 8 01:51:08 2013] ../../acisf13517/products/spectra/fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4.wrmf not found [Wed May 8 01:51:08 2013] Removal of ../../acisf13517/products/spectra/fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4.soff failed [Wed May 8 01:53:07 2013] Spectrum 4 has only 14 counts, deleting rmf [Wed May 8 01:53:07 2013] 173.77 [Wed May 8 01:57:24 2013] Updating aperture counts using extracted products [Wed May 8 01:57:24 2013] Total counts from fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4_src.pi.gz = 21.00 [Wed May 8 01:57:24 2013] Total counts from fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4_bgd.pi.gz = 4.00 [Wed May 8 01:57:24 2013] Got source and background scale factors 0.000001, 0.000023 [Wed May 8 01:57:24 2013] User source parameters: Position = (923.1, 535.4) = 20 31 39.95 -40 44 42.9 Extent = 0.8" x 0.5", rotation angle = 72 Source aperture counts = 20.8 +/- 5.7 Background aperture counts = 0.2 Rate = 0.002 +/- 0.0006 [Wed May 8 01:57:24 2013] Updating counts from extracted products [Wed May 8 01:57:24 2013] Set source signif. to 20.79/0.46 = 45.27 [Wed May 8 01:57:24 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 01:57:24 2013] Using photon index=1.80, rate=0.00209, arf fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4.arf [Wed May 8 01:57:24 2013] Assuming count rate is from the 0.20-8.00 bandpass [Wed May 8 01:57:24 2013] Updating source flux to 2.8e-14 [Wed May 8 01:57:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 01:57:30 2013] acisf13517/analysis//spectral/fullrun_ccd2_acisf13517_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete