[Sat Jan 28 22:09:28 2012] Detection parameters:
  Position = (1161.0, 432.1) = 22 32 57.28 -53 40 49.4
  Extent = 0.7" x 0.5", rotation angle = 24 degrees
  Source counts = 53.3 +/- 7.3
  Background counts = 0.7
  Rate = 0.003 +/- 0.0004

[Sat Jan 28 22:09:28 2012] Off-axis axis estimate = 2.98'
[Sat Jan 28 22:33:39 2012] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 22:33:39 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Sat Jan 28 22:33:39 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.431
[Sat Jan 28 22:33:39 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.58"
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src3.ximg exists
[Sat Jan 28 22:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src3.csv
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Jan 28 22:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src3.csv
[Sat Jan 28 22:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jan 28 22:48:35 2012] Fit fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Jan 28 23:33:33 2012] Spatial fit model total counts = 59.511700, observed total counts = 59.000000
[Sat Jan 28 23:33:33 2012] Offset between fit and detection position for source 6 = 0.701073 pixels
[Sat Jan 28 23:33:33 2012] 59.486400 total counts/ 8.206200 bgd. counts: snr = 17.901056
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.701073 pixels
  Position = (1161.4, 432.6) = 22 32 57.28 -53 40 49.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 51.3 +/- 7.7
  Background counts = 8.2
  Rate = 0.003 +/- 0.0005
[Sat Jan 28 23:33:33 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 23:33:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 23:33:33 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 23:33:33 2012] Source does appear to be extended
[Sat Jan 28 23:33:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 23:57:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 23:57:09 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Sat Jan 28 23:57:09 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.792
[Sat Jan 28 23:57:09 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.58"
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src3.ximg exists
[Sun Jan 29 00:07:17 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src3.csv
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Jan 29 00:07:17 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src3.csv
[Sun Jan 29 00:07:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jan 29 00:07:17 2012] Fit fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jan 29 00:39:05 2012] Spatial fit model total counts = 58.999700, observed total counts = 59.000000
[Sun Jan 29 00:39:05 2012] Offset between fit and detection position for source 6 = 0.015111 pixels
[Sun Jan 29 00:39:05 2012] 58.726510 total counts/ 7.837910 bgd. counts: snr = 18.176923
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.015111 pixels
  Position = (1161.4, 432.7) = 22 32 57.28 -53 40 49.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 50.9 +/- 7.7
  Background counts = 7.8
  Rate = 0.003 +/- 0.0004
[Sun Jan 29 00:39:05 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 00:39:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 00:39:05 2012] Assessing source extent using major axis lower bound
[Sun Jan 29 00:39:05 2012] Source does appear to be extended
[Sun Jan 29 00:39:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 00:52:22 2012] Writing source region out to fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6_src.reg
[Sun Jan 29 00:52:22 2012] Extracting stamp from image fullrun_ccd3_acisf13504_pi14-548_cl_sm2.00.img.gz, (1134, 405) - (1189, 460)
[Sun Jan 29 00:52:22 2012] Writing fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6.gif
[Sun Jan 29 00:53:31 2012] Size of ../../acisf13504/products/events/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6_src.evt.gz[events] = 53 counts
[Sun Jan 29 00:53:31 2012] Mean chipx,y = (957.51, 879.94)
[Sun Jan 29 00:53:31 2012] Mean tdetx,y = (4252.06, 4018.51)
[Sun Jan 29 00:53:31 2012] chipx,y range = (939.00-976.00, 861.00-896.00)
[Sun Jan 29 00:53:31 2012] Size of ../../acisf13504/products/events/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 6 counts
[Sun Jan 29 00:53:32 2012] Not generating rmf since there are only 50 counts
[Sun Jan 29 00:53:32 2012] arf not found, will run specextract
[Sun Jan 29 00:54:01 2012] ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6.warf not found
[Sun Jan 29 00:54:01 2012] ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6.wrmf not found
[Sun Jan 29 00:54:01 2012] Removal of ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6.soff failed
[Sun Jan 29 01:02:01 2012] Spectrum 6 has only 51 counts, deleting rmf
[Sun Jan 29 01:02:01 2012] 199.936
[Sun Jan 29 01:03:30 2012] Updating aperture counts using extracted products
[Sun Jan 29 01:03:30 2012] Error reading totcts from fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Jan 29 01:03:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 01:03:30 2012] Using photon index=1.80, rate=0.00299, arf fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6.arf
[Sun Jan 29 01:03:30 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jan 29 01:03:30 2012] Updating source flux to 3.5e-14
[Sun Jan 29 01:03:36 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jan 29 01:03:37 2012] acisf13504/analysis//spectral/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete