[Sat Jan 28 22:09:28 2012] Detection parameters:
  Position = (965.2, 523.8) = 22 33 8.12 -53 40 4.3
  Extent = 0.5" x 0.5", rotation angle = 98 degrees
  Source counts = 37.7 +/- 6.2
  Background counts = 0.3
  Rate = 0.002 +/- 0.0004

[Sat Jan 28 22:09:28 2012] Off-axis axis estimate = 2.78'
[Sat Jan 28 22:33:39 2012] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Sat Jan 28 22:33:39 2012] Initial guess for spatial extent in simple fitting = 0.54"
[Sat Jan 28 22:33:39 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.885
[Sat Jan 28 22:33:39 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.54"
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src4.ximg exists
[Sat Jan 28 22:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src4.csv
[Sat Jan 28 22:48:34 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src4_1.ximg exists
[Sat Jan 28 22:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src4.csv
[Sat Jan 28 22:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13504_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 28 22:48:35 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sat Jan 28 22:48:35 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jan 28 22:48:35 2012] Fit fullrun_ccd3_acisf13504_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Jan 28 23:33:33 2012] Spatial fit model total counts = 36.655000, observed total counts = 38.000000
[Sat Jan 28 23:33:33 2012] Offset between fit and detection position for source 3 = 0.701611 pixels
[Sat Jan 28 23:33:33 2012] 36.656211 total counts/ 0.013111 bgd. counts: snr = 320.016700
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.701611 pixels
  Position = (965.7, 524.3) = 22 33 8.12 -53 40 4.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 36.6 +/- 6.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sat Jan 28 23:33:33 2012] Vigneting correction estimate = 1.000000
[Sat Jan 28 23:33:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 28 23:33:33 2012] Assessing source extent using major axis lower bound
[Sat Jan 28 23:33:33 2012] Source does appear to be extended
[Sat Jan 28 23:33:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 28 23:57:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 28 23:57:09 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Jan 28 23:57:09 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.297
[Sat Jan 28 23:57:09 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.40"
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src4.ximg exists
[Sun Jan 29 00:07:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src4.csv
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Jan 29 00:07:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src4.csv
[Sun Jan 29 00:07:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13504_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Jan 29 00:07:17 2012] fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jan 29 00:07:17 2012] Fit fullrun_ccd3_acisf13504_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Jan 29 00:39:05 2012] Spatial fit model total counts = 37.386800, observed total counts = 38.000000
[Sun Jan 29 00:39:05 2012] Offset between fit and detection position for source 3 = 0.045652 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.045652 pixels
  Position = (965.8, 524.3) = 22 33 8.12 -53 40 4.3
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 37.4 +/- 6.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Sun Jan 29 00:39:05 2012] Vigneting correction estimate = 1.000000
[Sun Jan 29 00:39:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan 29 00:39:05 2012] Assessing source extent using major axis lower bound
[Sun Jan 29 00:39:05 2012] Source does appear to be extended
[Sun Jan 29 00:39:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan 29 00:52:22 2012] Writing source region out to fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3_src.reg
[Sun Jan 29 00:52:22 2012] Extracting stamp from image fullrun_ccd3_acisf13504_pi14-548_cl_sm2.00.img.gz, (947, 505) - (985, 543)
[Sun Jan 29 00:52:22 2012] Writing fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3.gif
[Sun Jan 29 00:54:09 2012] Size of ../../acisf13504/products/events/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3_src.evt.gz[events] = 38 counts
[Sun Jan 29 00:54:09 2012] Mean chipx,y = (795.45, 734.26)
[Sun Jan 29 00:54:09 2012] Mean tdetx,y = (4397.74, 3856.45)
[Sun Jan 29 00:54:09 2012] chipx,y range = (781.00-814.00, 716.00-751.00)
[Sun Jan 29 00:54:09 2012] Size of ../../acisf13504/products/events/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 2 counts
[Sun Jan 29 00:54:10 2012] Not generating rmf since there are only 37 counts
[Sun Jan 29 00:54:10 2012] arf not found, will run specextract
[Sun Jan 29 00:54:37 2012] ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3.warf not found
[Sun Jan 29 00:54:37 2012] ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3.wrmf not found
[Sun Jan 29 00:54:37 2012] Removal of ../../acisf13504/products/spectra/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3.soff failed
[Sun Jan 29 01:02:01 2012] Spectrum 3 has only 37 counts, deleting rmf
[Sun Jan 29 01:02:01 2012] 200.794
[Sun Jan 29 01:03:30 2012] Updating aperture counts using extracted products
[Sun Jan 29 01:03:30 2012] Error reading totcts from fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Jan 29 01:03:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan 29 01:03:30 2012] Using photon index=1.80, rate=0.00219, arf fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3.arf
[Sun Jan 29 01:03:30 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jan 29 01:03:30 2012] Updating source flux to 2.6e-14
[Sun Jan 29 01:03:36 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jan 29 01:03:37 2012] acisf13504/analysis//spectral/fullrun_ccd3_acisf13504_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete